"Обшие" справочники, Технические и инженерные Опции

[istigatore]

A rich collection of books regarding the Petroleum Reservoir.....
from demonoid..

List of books..:
Advances in Resevoir Geology.pdf 52.85 MB
An Introduction In Reservoir Fluid Properties.pdf 21.69 MB
Applied Petroleum Resevoir Eng..pdf 21.72 MB
Applied Petroleum Resevoir/Applied Petroleum Resevoir Vol-1.pdf 64.40 MB
Applied Petroleum Resevoir/Applied Petroleum Resevoir Vol-2.pdf 60.04 MB
Basics of Reservoir Engineering.pdf 17.08 MB
Carbonate Resevoir Characteriztion.pdf 28.85 MB
Dr Hamed Notes.pdf 4.75 MB
Elsevier - Advanced Reservoir Engineering - 2004 - (By Laxxuss).pdf 9.61 MB
Fundamentals of Numerical Reservoir Simulation-Peacema.pdf 6.31 MB
Fundamentals of Resevoir Eng..pdf 15.90 MB
Geophysics Of Resevoir And Civil Engineering.PDF 73.45 MB
Natural Reservoir Engineering.pdf 20.63 MB
Petroleum Geology and Reservoirs (By Aramco).pdf 1.59 MB
Petroleum Res. Eng. Method.pdf 34.40 MB
Petroleum Res. Eng. Physical Properties.pdf 31.28 MB
Petroleum Reservoir Engineering (By James W. Amyx).pdf 31.28 MB
PRACTICAL RESERVOIR MONITORING/00-0verview.pdf 87.90 KB
PRACTICAL RESERVOIR MONITORING/01-Distributed Pressures.pdf 4.72 MB
PRACTICAL RESERVOIR MONITORING/021-Well Testing Overview.pdf 2.96 MB
PRACTICAL RESERVOIR MONITORING/022-Diffusivity.pdf 143.20 KB
PRACTICAL RESERVOIR MONITORING/023-WTI methodology.pdf 389.19 KB
PRACTICAL RESERVOIR MONITORING/024-WTI models.pdf 897.46 KB
PRACTICAL RESERVOIR MONITORING/025-Gas and Limit Testing.pdf 253.66 KB
PRACTICAL RESERVOIR MONITORING/026-WFT testing.pdf 2.34 MB
PRACTICAL RESERVOIR MONITORING/031-PL Measurements.pdf 3.08 MB
PRACTICAL RESERVOIR MONITORING/032-PL Interpretation.pdf 4.94 MB
PRACTICAL RESERVOIR MONITORING/033-PL in HW's.pdf 517.92 KB
PRACTICAL RESERVOIR MONITORING/034-Production Testing and LRT.pdf 536.81 KB
PRACTICAL RESERVOIR MONITORING/035-NODAL.pdf 151.97 KB
PRACTICAL RESERVOIR MONITORING/036-Reservoir Pressure (Recap).pdf 72.61 KB
PRACTICAL RESERVOIR MONITORING/041-Waterflooding.pdf 1.08 MB
PRACTICAL RESERVOIR MONITORING/042-Saturation Monitoring.pdf 5.63 MB
PRACTICAL RESERVOIR MONITORING/043-Material Balance.pdf 186.96 KB
PRACTICAL RESERVOIR MONITORING/051-Water Conformance.pdf 960.46 KB
PRACTICAL RESERVOIR MONITORING/061-Fluid Sampling.pdf 3.57 MB
PRACTICAL RESERVOIR MONITORING/071-Permanent Monitoring.pdf 108.64 KB
Staged Field Experiment/Staged Field Experiment-volume 1(1).pdf 16.81 MB
Staged Field Experiment/Staged Field Experiment-volume 1(2).pdf 11.24 MB
Staged Field Experiment/Staged Field Experiment-volume 2.pdf 19.83 MB
Staged Field Experiment/Staged Field Experiment-volume 4.pdf 19.40 MB

total size: 596MB
here the torrent....

Сообщение отредактировал istigatore - 4.05.2010 - 23:31

Прикрепленные файлы

 Demonoid.com_Petroleum_Reservoir_Eng__PDF_Collection__596MB.rar ( 15.06 килобайт ) Кол-во скачиваний: 78

 

[Visik]

Спасибо, с http://www.MegaShare.com/1767275 все скачалось =)

[istigatore]

W.F. Chen, J.Y. Richard Liew, "The Civil Engineering Handbook, 2 Ed"
CRC; 2 ed | 2002 | ISBN: 0849309581 | 2904 pages | PDF | 30,2 MB



First published in 1995, the award-winning Civil Engineering Handbook soon became known as the field's definitive reference. To retain its standing as a complete, authoritative resource, the editors have incorporated into this edition the many changes in techniques, tools, and materials that over the last seven years have found their way into civil engineering research and practice.The Civil Engineering Handbook, Second Edition is more comprehensive than ever. You'll find new, updated, and expanded coverage in every section. In fact, more than 1/3 of the handbook is new or substantially revised. In particular you'll find increased focus on computing reflecting the rapid advances in computer technology that has revolutionized many aspects of civil engineering. You'll use it as a survey of the field, you'll use it to explore a particular subject, but most of all you'll use The Civil Engineering Handbook to answer the problems, questions, and conundrums you encounter in practice
DDLS

» Click to show Spoiler - click again to hide... «

http://uploading.com/files/2XZ24MCC/CivilEngin.zip.html
or
http://depositfiles.com/files/pu3o7yue1

[istigatore]

Civil Engineering - The Wiley Dictionary of Civil Engineering and Construction
Wiley | 1997 | ISBN: 0471181153 | PDF | 688 pages | 52 Mb



The Wiley Dictionary of Civil Engineering and Construction provides comprehensive coverage of a broad range of technical disciplines. The definitions are designed to be of use to professionals in architecture, engineering, surveying, building, construction, forestry, mining, and public works. Entries include terms, concepts, names, abbreviations, tools, and techniques common to these disciplines, and virtually all terms and their functions were supplied by working professionals and experts in each field.

More than 30,000 definitions and descriptions, including many that are not covered in other dictionaries

* Written with the support and assistance of nearly 100 manufacturers, trade associations, government agencies, and specialists
* All terms arranged alphabetically; many grouped according to logical common topics; thoroughly cross-referenced
* All weights, volumes, and spatial dimensions presented in both metric and nonmetric values (conversion factors included).
DDLS

» Click to show Spoiler - click again to hide... «

http://uploadbox.com/files/ojgQ0cW1tX
or
http://uploading.com/files/KY4F5HNZ/cbfCivilEngineeringandConstruction_0471181153.rar.html
or
http://depositfiles.com/files/jzcuehsei

[istigatore]

Alberto Bernardini, Fulvio Tonon, "Bounding Uncertainty in Civil Engineering: Theoretical Background"
Springer | 2010 | ISBN: 3642111890 | 350 pages | PDF | 3,5 MB



In engineering contexts, random sets are useful when there is scarce or imprecise information as well as when a model for the engineering system is imprecise (e.g., discretization errors, different competing models, upper and lower bounds in limit analysis). Random sets generalize the concept of random variables from point measures to set measures; equivalently, they embody a convex set of probability measures.

Taking an engineering approach rather than a mathematical one, Random Sets in Civil Engineering is a gentle introduction to the subject that does not require advanced mathematical knowledge. Basic ideas and methods are presented and demonstrated with the aid of simple worked-out examples and suggested problems. Connections are clarified to the more general theory of imprecise probabilities and to other non classical models of uncertainty and approximate reasoning in decision making (e.g., fuzzy sets and evidence theory).

The book serves as a reference for practicing engineers involved in planning, design, construction and management of civil infrastructures, as well as a graduate-level textbook. Readers interested in uncertainty modelling will find general solutions and algorithms, which may also be applied to problems in other fields beyond engineering.

In the second volume of the book (to be planned in the future), the application of the new methods is demonstrated for selected examples with real case-histories from civil engineering: reliability analysis of structures, soil and rock slopes, rock mass characterization, optimization of tunnel reinforcement and lining, evaluation of seismic vulnerability of buildings and damage scenarios in urban areas.
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/nut274tcy
or
http://uploading.com/files/385137d9/3642111890%252BBounding.zip/

[istigatore]

Jean-Paul Kurtz "Dictionary of Civil Engineering"
Springer | 2004-09-14 | ISBN: 0306483173 | 1516 pages | PDF | 55,3 MB | Cost: 168$ on Amazon\Ebay



This English version of the French publication, will be a valuable reference tool for civil engineers. There are over 12,000 definitions accompanied by more than 1,300 charts, tables, and graphs. This dictionary is a comprehensive compilation of definitions, examples and descriptions - from the study of soils, and the various materials and equipment used, including the most common architectural terms as they relate to civil engineering. The clear and concise presentation of this dictionary will easily clarify often confusing concepts and correct other lexicological errors. This compendium will be an invaluable tool not only for civil engineers, but also for lawyers, contractors, engineering and design departments, architects, etc. and all trade associations involved with this discipline. This dictionary may also be used as a valuable teaching tool.

....Torrent from ThePirateBay...

Прикрепленные файлы

 ThePirateBay_0306483173_Dictionary_of_Civil_Engineering.rar ( 41.4 килобайт ) Кол-во скачиваний: 60

 

[istigatore]

Engineering Geology for Underground Rocks
Springer; 1 edition | September 10, 2007 | ISBN: 3540732942 | 320 pages | PDF | 5.6 Mb



Engineering geology for underground rocks is a sub-discipline of engineering geology for describing and solving geological engineering problems encountered in underground mining, petroleum and civil engineering. It covers rock mechanics for underground rocks, rock hydraulics, wellbore mechanics, mine geology and mine hydrogeology.

This book clearly and systematically explains underground engineering geology principles, methods, theories and case studies, depicts engineering problems in underground rock engineering and how to study and solve them. It specially emphasizes mechanical and hydraulic couplings in rock engineering for wellbore stability, mining near aquifers and other underground structures where inflow is a problem. Using the methods and models given in this book, the reader is able to analyse underground geological engineering problems and also for the design of underground structures.

Professionals and students in engineering geology, geological, mining, petroleum, civil engineering, rock mechanics, and mine geology will find this an essential reference.
DDL RS

» Click to show Spoiler - click again to hide... «

http://rapidshare.com/files/251816210/Engineering_Geology_for_Underground_Rocks.rar

ICE Manual of Bridge Engineering 2nd Edition
Publisher: Institution of Civil Engineers | Pages: 704 | 2008-10-20 | ISBN 0727734520 | PDF | 11 MB



The fully revised, restructured and updated second edition of the "ICE Manual of Bridge Engineering" has been written and edited by a team of leading experts and presents valuable contributions from across the field within a single resource. The second edition comprehensively addresses key topic within bridge engineering, from history and aesthetics to design, construction and maintenance issues.This edition includes: Practical 'how to' approach; Significant new content added to build on bestselling first edition; and, Contributions from specialist authors with real world best-practice advice. "ICE Manual of Bridge Engineering, Second Edition" is the authoritative point of reference for practicing civil and structural engineers in consulting firms and government agencies, bridge contractors, research institutes, universities and colleges - in short, all practitioners involved in any aspect of the analysis, design, construction, repair, maintenance, and refurbishment of bridges. The ICE manuals series will offer civil engineers the quickest route to the information they need, ultimately providing core knowledge for the profession within a single highly referenced resource. ICE manuals will be available both in print and online and will deliver a comprehensive, authoritative and accessible package for all those working in civil engineering.
DDLS

» Click to show Spoiler - click again to hide... «

http://uploading.com/files/1mda48am/ICE_Manual_of_Bridge_Engineering_2nd_Ed.pdf/
or
http://hotfile.com/dl/15223846/5126ae9/ICE_Manual_of_Bridge_Engineering_2nd_Ed.pdf.html

[istigatore]

Ship-shaped Offshore Installations: Design, Building, and Operation
Publisher: Cambridge University Press | ISBN: 0521859212 | Authors: Jeom Kee Paik, Anil Kumar Thayamballi | Cost: 122$ On Amazon



Ship-shaped offshore units are some of the more economical systems for the development of offshore oil and gas, and are often preferred in marginal fields. These systems are especially attractive to develop oil and gas fields in deep and ultra-deep water areas and remote locations away from existing pipeline infrastructures. Recently, the ship-shaped offshore units have been applied to near shore oil and gas terminals. It is an ideal text and reference on the technologies for design, building and operation of ship-shaped offshore units, within inevitable space (and time) requirements. The book includes a range of topics, from the initial contracting strategy to decommissioning and the removal of the units concerned. Coverage includes both fundamental theory and principles of the individual technologies. This book will be useful to students who will be approaching the subject for the first time as well as designers working on the engineering for ship-shaped offshore installations.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/3gwpl3t1z31s/0521859212.rar.html
or
http://hotfile.com/dl/35258171/0e01728/0521859212.rar.html

[istigatore]

Environmental Control in Petroleum Engineering
Publisher: Gulf Professional Publishing | ISBN: 0884152731 | Authors: DR. John C. Reis Ph.D. | Cost: 123$ On Amazon



The petroleum industry must minimize the environmental impact of its various operations. This extensively researched book assembles a tremendous amount of practical information to help reduce and control the environmental consequences of producing and processing petroleum and natural gas. The best way to treat pollution is not to create it in the first place. This book shows you how to plan and manage production activities to minimize and even eliminate some environmental problems without severely disrupting operations. It focuses on ways to treat drilling and production wastes to reduce toxicity and/or volume before their ultimate disposal. You'll also find methods for safely transporting toxic materials from the upstream petroleum industry away from their release sites. For those sites already contaminated with petroleum wastes, this book reviews the remedial technologies available. Other topics include United States federal environmental regulations, sensitive habitats, major U.S. chemical waste exchanges, and offshore releases of oil. Environmental Control in Petroleum Engineering is essential for industry personnel with little or no training in environmental issues as well as petroleum engineering students.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/t6gh4id6ffz9/0884152731.rar.html
or
http://hotfile.com/dl/32262459/8e4087c/0884152731.rar.html
or
http://hotfile.com/dl/35283196/85b626b/0884152731.rar.html

[istigatore]

Engineered Rock Structures in Mining and Civil Construction
Publisher: Taylor & Francis | Pages: 536 | 01/01/2006 | ISBN 978-0-415-40013-8 | PDF | 180 MB



“ The book collates and sifts a vast amount of literature on the design of structures in the mining and construction industries to synthesize a comprehensive text on the subject area. The focus is on the application of theory to practice and the book is richly illustrated with worked out examples. The presentation is lucid and based on the extensive professional, teaching and research experience of the authors. The text seeks to address the key issues of design of 'engineered' structures in or on rock. The book will serve as a standard text for undergraduate courses in mining, civil engineering, engineering geology and rock mechanics. ”
DDL RS

» Click to show Spoiler - click again to hide... «

http://rapidshare.com/files/251773207/Engineered_Rock_Structures_in_Mining_and_Civil_Construction.part1.rar
http://rapidshare.com/files/251771860/Engineered_Rock_Structures_in_Mining_and_Civil_Construction.part2.rar
http://rapidshare.com/files/251771336/Engineered_Rock_Structures_in_Mining_and_Civil_Construction.part3.rar
http://rapidshare.com/files/251766887/Engineered_Rock_Structures_in_Mining_and_Civil_Construction.part4.rar

[istigatore]

T. H. G. Megson “Structural and Stress Analysis"
Butterworth-Heinemann | 2005-04-15 | ISBN: 0750662212 | 744 pages | PDF | 6,6 Mb



Structural analysis is the corner stone of civil engineering and all students must obtain a thorough understanding of the techniques available to analyse and predict stress in any structure.
The new edition of this popular textbook provides the student with a comprehensive introduction to all types of structural and stress analysis, starting from an explanation of the basic principles of statics, normal and shear force and bending moments and torsion. Building on the success of the first edition, new material on structural dynamics and finite element method has been included.
Virtually no prior knowledge of structures is assumed and students requiring an accessible and comprehensive insight into stress analysis will find no better book available.

* Comprehensive overview of structural and stress analysis
* Invaluable to undergraduate civil engineers
* Numerous worked examples and problems
* Solutions manual available online
DDLS

» Click to show Spoiler - click again to hide... «

http://uploading.com/files/6RE9P1Q2/Structural_and_Stress_Analysis.rar.html%20
or
http://depositfiles.com/files/7633500%20
or
http://www.megaupload.com/?d=9OEG3DB5%20

Tunelling and Tunnel Mechanics: A Rational Approach to Tunnelling, Dimitrios Kolymbas
Springer | English | ISBN 3540251960 | 431 pages | PDF | 10.57 MB | 2005



Tunnelling is an exciting and rapidly evolving technology. Pioneering processes are commonplace and innovative thinking continues to rewrite the rules. In civil engineering, tunnelling is one of the few areas where new horizons are constantly being discovered (ISBN-13: 9783540251965).

As rock mechanics is less developed and less known than soil mechanics, the principles of this young discipline are included in this book. I also attempted to integrate theoretical and practical viewpoints, since I consider both of them indispensable to engineering. The often encountered attitude of practitioners to blame theory (and vice versa) is regrettable. The theory addressed here refers to the mechanics of soil/rock behaviour and its interaction with the various support structures. Some chapters of the book aim at the description of planning and construction processes and, thus, need no reference to theory. Some other chapters contain both, practical and theoretical aspects.
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/ncgyltn9t
or
http://rapidshare.com/files/359686402/Tunnelling_and_Tunnel_Mechanics__2005_.pdf

[istigatore]

External Works, Roads and Drainage: A Practical Guide By Phil Pitman
Publisher Taylor & Francis | ISBN: 0419257608 | edition 2001 | PDF | 352 pages | 1,37 mb



Bridges the gap between theory and practice in building, construction, and civil engineering, providing practical guidance and the knowledge required "on the job." Comprehensive in scope, the book includes sections on legislation, environmental issues, surface water, highway and drainage design, road and pavement design, and external works. The book is well illustrated with flowcharts to guide the reader through the design process.
DDLS

» Click to show Spoiler - click again to hide... «

http://uploading.com/files/9F9W0ZBD/0419257608%201.zip.html
or
http://depositfiles.com/files/3golcfa1r

[istigatore]

Petroleum Geology of the South Caspian Basin
Publisher: Gulf Professional Publishing | ISBN: 0884153428 | Authors: L. Buryakovsky, Fred Aminzadeh, G.V. Chilingarian | Cost: 213$ On Amazon



In this information-packed volume, the authors present mathematical models and analyses for evaluating, assessing, and describing the petroleum geology of the oil-rich South Caspian Sea Basin, including eastern Azerbaijan and western Turkmenistan. Their mathematical models include descriptions of the development and structure of the surrounding geological systems and traps. Details the petrophysical properties and interrelationship with reservoir and source rocks Describes how new technology has made it possible to profitably produce off previously useless wells A valuable resource for exploration companies in the area of the South Caspian Basin
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/2cs3fe4xisqh/0884153428.rar.html
or
http://hotfile.com/dl/32262477/4739cb8/0884153428.rar.html
or
http://hotfile.com/dl/35283203/c2230cf/0884153428.rar.html

Sequence Stratigraphy on the Northwest European Margin (Norwegian Petroleum Society Special Publications)
Publisher: Elsevier Science | ISBN: 0444818634 | Cost: 275$ On Amazon



Sequence Stratigraphy, presently one of the most rapidly growing areas in geology, is concerned with the documentation and prediction of how sandstones (potential hydrocarbon reservoirs) and shales (potential source rocks) are distributed in time and space within sedimentary basins. The book takes a critical look at some of the sequence stratigraphy concepts, and provides an account of how these have been applied recently in NW Europe (North Sea, mid Norway and E. Greenland, Barents Sea and Svalbard), mainly in connection with the exploration for oil and gas. There is currently no similar book available.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/mh0xy6p3560s/0444818634.rar.html
or
http://hotfile.com/dl/30995622/8f03d93/0444818634.rar.html
or
http://hotfile.com/dl/35248480/1f0a289/0444818634.rar.html

[istigatore]

Seismic Amplitude Inversion in Reflection Tomography (Handbook of Geophysical Exploration: Seismic Exploration) (Vol 33)
Publisher: Pergamon | ISBN: 0080442439 | Authors: Y. Wang | Cost: 130$ On Amazon



This is the first book of its kind on seismic amplitude inversion in the context of reflection tomography. The aim of the monograph is to advocate the use of ray-amplitude data, separately or jointly with traveltime data, in reflection seismic tomography. The emphasis of seismic exploration is on imaging techniques, so that seismic section can be interpreted directly as a geological section. In contrast it is perhaps ironic that, in decades of industrial seismology, one major aspect of waveform data that potentially is easier to measure and analyse has generally been ignored. That is, the information content of seismic amplitudes. Perhaps the potential complexity has deterred most researchers from a more thorough investigation of the practical use of seismic amplitude data. The author of this volume presents an authoritative and detailed study of amplitude data, as used in conjunction with traveltime data, to provide better constraints on the variation of seismic wave speed in the subsurface. One of the fundamental problems in conventional reflection seismic tomography using only traveltime data is the possible ambiguity between the velocity variation and the reflector depth. The inclusion of amplitude data in the inversion may help to resolve this problem because the amplitudes and traveltimes are sensitive to different features of the subsurface model, and thereby provide more accurate information about the subsurface structure and the velocity distribution. An essential goal of this monograph is to make the amplitude inversion method work with real reflection seismic data.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/l720xnhwdeb1/0080442439.rar.html
or
http://hotfile.com/dl/30994920/1399c6c/0080442439.rar.html
or
http://hotfile.com/dl/35216004/09329b6/0080442439.rar.html

[istigatore]

Modeling and Simulation of Mineral Processing Systems
Publisher: Butterworth-Heinemann | ISBN: 0750648848 | Authors: R. Peter King | Cost: 130$ On Amazon



Dr. R. Peter King covers the field of quantitative modeling of mineral processing equipment and the use of these models to simulate the actual behavior of ore dressing and coal washing as they are configured to work in industrial practice. The material is presented in a pedagogical style that is particularly suitable for readers who wish to learn the wide variety of modeling methods that have evolved in this field. The models vary widely from one unit type to another. As a result each model is described in some detail. Wherever possible model structure is related to the underlying physical processes that govern the behaviour of particulate material in the processing equipment. Predictive models are emphasised throughout so that, when combined, they can be used to simulate the operation of complex mineral processing flowsheets. The development of successful simulation techniques is a major objective of the work that is covered in the text. * Covers all aspects of modeling and simulation * Provides all necessary tools to put teh theory into practice * Free CD ROM included
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/19138023/5ac6378/0750648848.rar.html
or
http://hotfile.com/dl/11138416/7d024f3/0750648848.rar.html

[istigatore]

Mechanical Engineers' Handbook(Vol I, II, III, IV) Third Edition
Wiley | 2005 | 3600 pages | English | ISBN-10 : 0471449903 | PDF | 72.9Mb



Mechanical Engineers' Handbook, Third Edition, provides a single source for all critical information needed by mechanical engineers in the diverse industries and job functions they find themselves. No single engineer can be a specialist in all areas that they are called on to work and the handbook provides a quick guide to specialized areas so that the engineer can know the basics and where to go for further reading.

* Book 1: Materials and Mechanical Design
* Book 2: Instrumentation, Systems, Controls, and MEMS
* Book 3: Manufacturing and Management
* Book 4: Energy and Power

Table Of Contents

VOLUME 1

PART 1. MATERIALS SELECTION
1. Carbon and Alloy Steels (Bruce L. Bramfitt)
2. Stainless Steel (James Kelly)
3. Aluminum Alloys (J.G. Kaufman)
4. Copper and Copper Alloys (Konrad J.A. Kundig)
5. Selection of Titanium Alloys for Design (Matthew Donachie)
6. Nickel and Its Alloys (T.H. Bassford, Jim Hosier and Gaylord Smith)
7. Magnesium and Its Alloys (Robert S. Busk and Robert E. Brown)
8. Selection of Superalloys for Design (Matthew J, Donachie and Stephen J.Donachie)
9. Plastics: Thermoplastics, Thermosets, and Elastomers (Edward N. Peters)
10. Composite Materials (Carl Zweben)
11. Smart Materials (James Harvey)
12. Overview of Ceramic Materials, Design, and Applications (R. Nathan Katz)
13. Sources of Materials Data (J.G. Kaufman)
14. Analytical Methods of Materials Selection (Dr. Mahmoud M. Farag)
PART 2. MECHANICAL DESIGN
15. Stress Analysis (Franklin E. Fisher)
16. An Introduction to the Finite Element Method (Tarek I. Zohdi)
17. Concurrent Engineering Technologies and Design for Six Sigma (James McMunigal and H. Barry Bebb)
18. TRIZ (James McMunigal)
19. Computer-Aided Design (Emory Zimmers, Jr.)
20. STEP (Martin Hardwick)
21. Virtual Reality-A New Technology for the Engineer (Ming C. Leu)
22. Physical Ergonomics (Maury A. Nussbaum and Jaap van Dieen)
23. Electronic Packaging (Warren C. Fackler)
24. Design Optimization-An Overview (A. Ravindran and G.V. Reklaitis)
25. Designing with Plastics (James Harvey)
26. Failure Considerations-Metals (Steve Daniewicz and Jack A. Collins)
27. Failure Analysis of Plastics (Vishu Shah)
28. Failure Modes: Performance and Service Requirements for Composites (Dietrich Munz)
29. Mechanical Reliability and Life Prediction for Brittle Materials (G.S.White, E.R. Fuller, Jr., and S.W. Freiman)
30. Total Quality Management in Mechanical Design (B.S. Dhillon)
31. Reliability in Mechanical Design (B.S. Dhillon)
32. Lubrication of Machine Elements (Bernard J. Hamrock)
33. Seal Technology (Bruce M. Steinetz)
34. Vibrations and Shock (Singiresu S. Rao)
35. Noise Measurements and Control (George M. Diehl)
36. Nondestructive Testing (Robert L. Crane and Jeremy Knopp)

VOLUME 2

PART 1. INSTRUMENTATION
1. Instrument Statics (Sriram Sundararajan, Jerry Lee Hall and Mahmood Naim)
2. Input and Output Characteristics (Adam C. Bell)
3. Bridge Transducers (Patrick L. Walter)
4. Measurements (E.L. Hixson and E. A. Ripperger)
5. Temperature and Flow Transducers (Robert J. Moffat)
6. Signal Processing (John Turnbull)
7. Data Acquisition and Display Systems (Philip C. Milliman)
8. Digital Integrated Circuits: A Practical Application (Todd Rhoad and Keith
Folken)

PART 2. SYSTEMS, CONTROLS, AND MEMS
9. Systems Engineering: Analysis, Design, and Information Processing for Analysis and Design (Andrew P. Sage)
10. Mathematical Models of Dynamic Physical Systems (K. Preston White, Jr.)
11. Basic Control Systems Design (William J. Palm)
12. Closed-Loop Control Systems Analysis (Suhada Jayasuriya)
13. Control System Performance Modification (Suhada Jayasuriya)
14. Servoactuators for Closed-Loop Control (Karl N. Reid and Syed Hamid)
15. Controller Design (T. Peter Neal)
16. General Purpose Control Devices (James H. Christensen, Robert J. Kretschmann and Muneshige Yamazaki)
17. State-Space Methods for Dynamic Systems Analysis (Krishnaswamy Srinivasan)
18. Control System Design Using State-Space Methods (Krishnaswamy Srinivasan)
19. Neural Networks in Control Systems (Frank Lewis and Shuzhi Sam Ge)
20. Mechatronics (Shane Farritor)
21. MEMS (Mona E. Zaghloul)

VOLUME 3

PART 1. MANUFACTURING
1. Product Design for Manufacturing and Assembly (DFM&A) (Gordon Lewis)
2. Achieving Enterprise Goals with New Process Technology(Steve W. Tuszynski)
3. Classification Systems (Dell K. Allen)
4. Production Planning (Bhaba R. Sarker, Dennis B. Webster and Thomas G. Ray)
5. Production Processes and Equipment (Magd E. Zohdi, Dennis B. Webster and William E. Biles)
6. Metal Forming, Shaping, and Casting (Magd E. Zohdi, Dennis B. Webster and William E. Biles)
7. Mechanical Fasteners (Murray J. Roblin and Anthony Luscher)
8. Statistical Quality Control (Magd E. Zohdi)
9. Computer-Integrated Manufacturing (William E. Biles and Magd E. Zohdi)
10. Material Handling (William E. Biles, Mickey Wilhelm, John S. Usher and Magd E. Zohdi)
11. Surface Coating Technology (Suzanne L. Rohde and Allan Matthews)
12. Environmentally Conscious Manufacturing (I. S. Jawahir and X. Wang)

PART 2. MANAGEMENT, FINANCE, QUALITY, LAW, AND RESEARCH
13. Managing Projects in Engineering Organization Using Inter-organizational Teams (Karen L. Higgins and Joseph A. Maciariello)
14. Managing People (Hans J. Thamhain)
15. Finance and the Engineering Function (William Brett)
16. Detailed Cost Estimating (Rod Stewart)
17. Investment Analysis (Byron W. Jones)
18. Total Quality Management and the Mechanical Engineer (R. Alan Kemerling and Jack B. ReVelle)
19. Registrations, Certifications, and Awards Jack B. ReVelle (Cynthia M.Sabelhaus)
20. Safety Engineering (Jack B. ReVelle)
21. What the Law Requires of the Engineer (Alvin S. Weinstein and Martin S.Chizek)
22. Patents (David A. Burge and Benjamin D. Burge)
23. Electronic Infrmation Resources: Your Online Survival Guide (Robert N.Schwarzwalder, Jr.)
24. Sources of Mechanical Engineering Information (Fritz Dusold and Myer Kutz)

VOLUME 4

1. Thermophysical Properties of Fluids (Peter E. Liley)
2. Fluid Mechanics (Reuben M. Olson)
3. Thermodynamics Fundamentals (Adrian Bejan)
4. Exergy Analysis and Entropy Generation Minimization (Adrian Bejan)
5. Heat Transfer Fundamentals (G.P. "Bud" Peterson)
6. Combustion (Eric Eddings)
7. Furnaces (Carroll Cone)
8. Gaseous Fuels (Richard J. Reed)
9. Liquid Fossil Fuels from Petroleum (Richard J. Reed)
10. Coals, Lignite, Peat (James Keppeler)
11. Solar Energy Applications (Jan F. Kreider)
12. Geothermal Resources and Technology: An Introduction (Peter D. Blair)
13. Energy Auditing (Carl Blumstein and Peter Kuhn)
14. Heat Exchangers, Vaporizers, Condensers (Joseph W. Palen)
15. Heat Pipes (Hongbin Ma)
16. Air Heating (Richard J. Reed)
17. Cooling Electronic Equipment (Allan Kraus, Avram Bar-Cohen and Abhay Watwe)
18. Fans, Blowers, Compressors, and Pumps (Keith Marchildon and Dave Mody)
19. Nuclear Power (William Kerr and William Updegrove)
20. Gas Turbines (Harold Miller and Todd Nemec)
21. Wind Turbines (Todd Nemec)
22. Steam Turbines (William G. Steltz)
23. Internal Combustion Engines (Ronald Douglas Matthews)
24. Refrigeration (Dennis L. O'Neal)
25. Cryogenic Systems (Leonard A. Wenzel)
26. Indoor Environmental Control (Jelena Srebric)
27. Air Pollution-Control Technologies (C.A. Miller)
28. Water Pollution-Control Technology (Carl A. Brunner and James F. Kreissl)
29. Fuel Cells (Matthew M. Mench)
30. Thermal Systems Optimization (Reinhard Radermacher)
31. Fluid Power (Andrew Alleyne)
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/42717958/ed668f4/Mechanical_Engineers_Handbook_Vol_I_II_III_IV.rar.html
or
http://sharingmatrix.com/file/4908290/Mechanical_Engineers_Handbook_Vol_I_II_III_IV.rar

Сообщение отредактировал istigatore - 14.05.2010 - 18:50

[istigatore]

Pavement Analysis and Design (2nd Edition)
Prentice Hall | 2003 | ISBN: 0131424734 | 792 pages | PDF | 180 MB



This up-to-date book covers both theoretical and practical aspects of pavement analysis and design. It includes some of the latest developments in the field, and some very useful computer software—developed by the author—with detailed instructions. Specific chapter topics include stresses and strains in flexible pavements, stresses and deflections in rigid pavements, traffic loading and volume, material characterization, drainage design, pavement performance, reliability, flexible pavement design, rigid pavement design, design of overlays, theory of viscoelasticity
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/43166027/0b9b48d/0131424734_Pavement.part1.rar.html
http://hotfile.com/dl/43166010/1add84e/0131424734_Pavement.part2.rar.html
or
http://rapidshare.com/files/387938074/0131424734_Pavement.part1.rar
http://rapidshare.com/files/387936490/0131424734_Pavement.part2.rar

[istigatore]

Petroleum Production Engineering, A Computer-Assisted Approach
Publisher: Gulf Professional Publishing | ISBN: 0750682701 | edition 2007 | PDF | 287 pages | 10 mb



Petroleum Production Engineering, A Computer-Assisted Approach provides handy guidelines to designing, analyzing and optimizing petroleum production systems. Broken into four parts, this book covers the full scope of petroleum production engineering, featuring stepwise calculations and computer-based spreadsheet programs. Part one contains discussions of petroleum production engineering fundamentals, empirical models for production decline analysis, and the performance of oil and natural gas wells.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/43223904/d123db9/4005.rar.html
or
http://rapidshare.com/files/388072408/4005.rar

[zanuda]

Отличная подборка литературы есть на сайте http://cmet4uk.ru/load/
Я там нашёл англо-русский разговорник с фразами и диалогами, аналогичный по внешнеэкономической деятельности у меня был с советских времён.
Там же куча типовых проектов.

[istigatore]

The Architect's Portable Handbook: First-Step Rules of Thumb for Building Design 4th Edit (McGraw-Hill Portable Handbook)
McGraw-Hill Professional | 2010-02-08 | ISBN: 0071639152 | 688 pages | PDF | 8 MB



The Essentials of Building Design--at Your Fingertips! Fully updated with the 2009 IBC International Building Code, this practical guide delivers the key data you need in every step of an architectural project--from initial planning and estimating through design and completion. The Architect's Portable Handbook, Fourth Edition, provides the latest code and cost information, along with a wealth of easy-to-follow diagrams, charts, tables, and checklists for building materials, components, and assemblies. This is a must-have on-the-job companion for every design professional

Get practical coverage of:

* Land planning
* Grading and drainage
* Soils
* Site improvements
* Landscaping and irrigation
* Green architecture
* Concrete
* Masonry
* Metals
* Wood
* Thermal and moisture protection
* Doors, windows, and glass
* Finishes
* Specialties
* Equipment
* Interiors
* Assemblies
* Conveying systems
* Plumbing and HVAC
* Lighting and electrical
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/44497963/9b67a24/0071639152.rar.html
or
http://uploading.com/files/25a51ecc/0071639152.rar/