"Обшие" справочники, Технические и инженерные Опции

[UseArt]

В этой теме ссылки на "общие" справочники . Справочник строителя, электротехнический ,машиностроительный и т.д.
--------------------------------------------------------------------------------------------------------------------------------------------------
Народ помогите пожалуйста найти справочник строителя на земляные работы, а то везде перерыл все денег за это хотят! может кто знает где можно найти дайти линк!

Сообщение отредактировал rabotyga - 4.07.2007 - 19:26

[musor72]

Не понял - что за справочник, какого рода информация?
Расценки, нормы или способы производства работ?
У меня есть Грандсмета и АРОС
Стройконсультант
Кодекс-Стройтехнолог (вот этот не ломаный, гад ).
Чего еще можно тут придумать?

[UseArt]

Че за АРОС?
Справочник строителя по роизводству работ нормы на затраты!

[UseArt]

musor72 можешь где нить выложить стройконсультант?

Нужен справочник Застройщика помогите плз

[nick0]

А не подскажете, Кодекс Стройтехнолог реально найти?

[ZurabAA]

Посмотрите на
www.elima.ru
www.stroim.dqd.ru
www.allbeton.ru
www.gvozdik.ru

[rabotyga]

Запостил по названию темы , а не по содержанию.
Справочник мастера-строителя, Минск 1955 (Казачек, Роговин)
Размер 22846 кБ
1036 страниц!Формат файла: DJVU
Издание третье.
Государственное издательство БССР. Редакция научно-технической литературы. Минск, 1955.

Главный редактор: Г.А.Казачек
Редактор: Я.А.Роговин

Аннотация: Справочник содержит следующие разделы: «Общая часть», «Строительные материалы и изделия», «Расчет конструкций», «Механизация строительства, строительные машины и транспорт», «Электротехника, силовое оборудование, сварка и резка», «Производство работ», «Приложения».
В составлении справочника принимали участие: канд. техн. наук С. С. Атаев, инж. ф. М. Климов, инж. М. А. Коробочкин, канд. техн. наук Э. Д. Певзнер, инж. Я. А. Роговин, инж. Б. А. Ракуть, инж. В. И. Рубин, инж. И. Д. Тиркельтауб, канд. техн. наук И. Л. Хаютин. Рецензент инж. Б. М. Мороговский.

_http://dwg.ru/norm/zip/norm581.zip

[Vasya_Novik]

РАЗЫСКИВАЕТСЯ!!! Оф. сайт: http://sprav.permonline.ru

У КОГО ЕСТЬ, ПОДЕЛИТЕСЬ, ПОЖАЛУЙСТА!!!

Справочник содержит:
- данные, необходимые для выбора материалов, оборудования, расчетов на прочность и является практическим руководством и справочным пособием для иженерно-технических работников
- нормативные материалы: ГОСТы, ОСТы, ТУ, РД, СНиПы, зарубежные стандарты
номенклатуру заводов-производителей с общими видами изделий и их техническими характеристиками.
Объем справочника составляет 4 компакт-диска.
Возможность распечатки - присутствует. Цена справочника 990 рублей.
Все разделы имеют чертежи общих видов изделий с подробными техническими характеристиками.

Некоторые разделы справочника:

Арматура трубопроводная (номенклатура заводов-изготовителей, арматура стальная, титановая, чугунная, из цветных металлов, из пластмассы, краткий справочник по арматуре 400 страниц, электро и пневмоприводы арматуры, условное обозначение запорной арматуры, заводы-производители трубопроводной арматуры, ответные части арматуры, нормы герметичности затворов, чертежи 1.0 Mb, ГОСТы, ОСТы, и т. д.)
64.0 Mb

Бетоны (легкие, ячеистые, химически стойкие, жаростойкие, силикатные, смеси, растворы, ГОСТы)
1.6 Mb

Битумы (строительные, дорожные жидкие и вязкие, ГОСТы)
0.4 Mb

Блоки железобетонные(для подвалов, вентиляционные, стеновые, газосиликатные, ГОСТы и др.)
0.9 Mb

Вентиляция (номенклатура вентиляторов, СНиПы, воздуховоды, диаграммы, клапаны, чертежи 0.1Mb)
7.9

Выключатели путевые (номенклатура изготовителей, ВПК, ВПУ, КУ700А, СКПЭ, ВП-1, ВПВ-1А, ВПВ-4М, взрывозащищенные концевики, чертежи 0.6Mb)
2.6 Mb

Гидравлика (номенклатура, гидронасосы, гидроцилиндры, распределители, разъемы, замки, моторы гидравлические насосные станции)
13.3 Mb

Гипсовые изделия (ГОСТы, листы гипсокартонные, гипс)
0.5 Mb

Грузоподъемные механизмы (канаты, краны, тали электрические и ручные, домкраты, коуши, талрепы, стропы резинотканевые и тросовые, складское оборудование, тяговые устройства, столы подъемные, подкрановые пути, погрузчики, лебедки ручные, гидравлические, электроприводные, краны стреловые, штабелеры, мостовые, Пионер, кран-балки, консольные, конвейеры ленточные, рекомендуемые области применения канатов, ГОСТы, РД, ПБ и т. д.)
59.6 Mb

Двери и окна (ГОСТы)
13.2 Mb

Детали машин (муфты, амортизаторы, пружины, передачи, кольца, оси, ГОСТы, DIN, чертежи 2.7Mb)
11.5 Mb

Детали профильные из древесины (ГОСТЫ, доски, плинтусы, поручни)
0.6 Mb

Детали технологических трубопроводов (отводы, переходы, заглушки эллиптические, тройники, подвески, гидрозатворы, чертежи 0.6Mb ГОСТы, ОСТы, РД, ТУ )
13.3 Mb

Допуски и посадки (ЕСДП, шероховатость, зубчатые передачи, шлицы, шпонки, ГОСТы, чертежи 0,3Mb)
3.4 Mb

Емкостное оборудование (номенклатура, резервуары подземные, резервуары с электроподогревом, сепараторы, дегазаторы, баллоны, реакторы, емкости, автоклавы, мешалки, ТУ, ГОСТы и т. д.)
29.2 Mb

Единая система конструкторской документации (ГОСТы, чертежи 3.7Mb – библиотеки элементов гидравлики и пневматики, кинематики, элементов трубопроводов, емкостей гидравлики и пневматики, пневмо-гидромашин и т. д.)
6.5 Mb

Защита от коррозии (ГОСТы, СНиПы, шкала оценки коррозии)
1.0 Mb

Кабельная продукция (номенклатура заводов-изготовителей, статьи, рекомендации, справочник)
44.5 Mb

КИПиА (номенклатура изготовителей, Fisher-Rosemount, Метран, Манометр г. Москва, Теплоприбор, Приборы и системы, Манотомь, Термоавтоматика, Эталон-прибор, ГОСТы, ТУ ,СНиПы, статьи, рекомендации, нормы проектирования, манометры, газоанализаторы, контроллеры, термопреобразователи, датчики давления, влажности, регуляторы уровня, уровнемеры, чертежи 0.6 мб)
100.0 Mb

Кирпичи (ГОСТы, керамические, силикатные)
0.9 Mb

Клеи, герметики и герметизирующие ленты (номенклатура , рекомендации, свойства, назначение)
4.2 Mb

Колонны железобетонные (ГОСТы)
0.6 Mb

Конструкции железобетонные высокотемпературные (СНиПы)
1.4 Mb

Крепеж (номенклатура, каталоги, стопорение, болты, винты, гайки, шплинты, саморезы, дюбели, ГОСТы, DIN, ISO, чертежи 20.0 мб )
9.5 Mb

Кровельные материалы (номенклатура, ТУ, рекомендации по применению)
2.5 Mb

Лакокрасочные покрытия (номенклатура, каталог цветов, грунтовки, шпатлевки, эмали, холодное цинкование, растворители, лаки, краски, краски порошковые, смывки, защитные покрытия, антисептики, алкиды, лаки полиуретановые ГОСТы, ТУ, нормативные документы, статьи, справочник по ЛКМ, рекомендации по применению)
33.2 Mb

Магниты, магнитопласты, магниты из металлокерамики (номенклатура заводов-изготовителей)
0.7 Mb

Мастики (номенклатура, ГОСТы, ТУ, рекомендации по применению)
1.6 Mb

Насосы, вакуум-насосы (номенклатура заводов, Катайский насосный завод, Вакууммаш, Ленинградский насосный завод, Кедрон, статьи, рекомендации, таблицы соответствия насосов-аналогов и т. д.)
20.0 Mb

Неметаллические конструкционные материалы (номенклатура, асбест, винипласт, гетинакс, ДСП, ДВП, капролон, полиуретан, текстолит, фанера, фторопласт, стекло, пуленепробиваемое стекло, справочник по стеклу, ГОСТы, ТУ, теплофизические и механические свойства)
8.9 Mb

Нормы проектирования трубопроводов (СНиПы , СН, ПБ, ВН, СП, клапаны предохранительные)
3.3 Mb

Нормы пожарной безопасности (НПБ, ППБ, СНиПы)
4.3 Mb

Нормы проектирования разные(водопровод, газоснабжение, канализация, тепловые сети, отопление, производственные здания, габариты приближения, ГОСТы, СНиПы, СП, РД, ОНТП, ВНТП, СН, СанПиН и т. д.)
35.2 Mb

Оборудование разное(фильтры, сепараторы, сильфоны, компрессоры, питатели, дозаторы, затворы, смесители, вибраторы, оборудование газовое, бетономешалки, инструмент пороховой, чертежи дозатора шнекового 1.1 мб, чертежи фильтра рукавного 1.0 мб, и т. д.)
19.7 Mb

Примеры текстовых документов (пояснительная записка, кабельный журнал, ведомость теплоизоляционных работ, ТТ на сосуд, задание на проектирование, ведомость материалов и т. д.)
2.9 Mb

Общетехнические сведения (формулы, коэффициенты, единицы измерений, таблица Менделеева, названия органических веществ, двоичная система, давление паров, окраска баллонов и т. п..)
6.3 Mb

Огнезащита (номенклатура производителей, ГОСТы, руководства, инструкции, пасты, покрытия)
1.7 Mb

Панели (ГОСТЫ, асбоцементные, гипсобетонные, железобетонные, металлические)
1.9 Mb

Патентование (заявление о выдаче патента, бланк рацпредложения, полезная модель, МПК и т. д.)
1.0 Mb

Печи и дымовые трубы (номенклатура, СНиПы, СП, РД, трубчатые печи, инструкции, чертежи трехзаходного спойлера дымовой трубы 0,2Мб, схема дневной маркировки дымовых труб 0.2 мб и т. д.)
2.9 Mb

Плиты (ГОСТы, железобетонные, цементностружечные и т. д.)
3.9 Mb

Пневматическое оборудование (номенклатура, классы загрязненности сжатого воздуха, двигатели, пневмостанции,пневмостанция винтовая, пневмоцилиндры: штоковые, ленточные, со стопором, с позиционером; пневмоглушители, подготовка воздуха, дроссели, клапаны, редукторы, реле, амортизаторы, датчики давления, вакуумное оборудование, датчики расхода, контроллеры, логические клапаны, позиционеры, усилитель давления, ТУ, и .т.д. ) плюс чертежи 319 Мб
139.0 Mb

Подвижной ж/д состав (чертежи 0.15 мб)

Подшипники (номенклатура заводов-изготовителей, переводная таблица подшипников по ISO, подшипники скольжения, знаки видов смазки, предельные отклонения, производители, ГОСТы, чертежи 2.8 Мб)
24.3 Mb

Пожарная безопасность (РД, порошок огнетушащий, извещатели пожарные и охранные)
0.4 Mb

Правила безопасности (ПБ, ПБХ, ПБ 03-75. Правила устройства и безопасной эксплуатации трубопроводов и т. д.)
2.6 Mb

Приводы (редукторы волновые, планетарно-цевочные, спироидные, конические, планетарные, червячные, мотор-редукторы, мотор-барабаны, вариаторы цепные, цепи вариаторные, номенклатура заводов-изготовителей, ГОСТы, ТУ, чертежи 1.2Мб и т. д.)
29.4 Mb

Примеры расчетов (расчет ППК, расчет аппарата на прочность, расчет рессивера, расчет температуры стенки аппарата с теплоизоляцией, расчет регулирующего клапана и т. д.)
2.0 Mb

Проволока (номенклатура, ГОСТы, ТУ)
1.1 Mb

Проектирование стальных конструкций (площадь наружной поверхности профилей, отклонения от проектных размеров, проектирование опор под трубопроводы, ГОСТы, СНиПы, СП, чертежи 1.0 Мб)
6.3 Mb

Прокат (номенклатура, швеллер, уголок, двутавр, двутавр для вагоностроения, зетовый профиль, рельсы, прокат с полимерным покрытием, жесть, зарубежные настилы, просечно-вытяжной лист, перфорированные лист, лестничные ступени, оцинковка, профнастил, ГОСТы, ТУ, СТО, ISO, DIN, API, EN, ASTM, чертежи 1.3Мб, и т. д.)
21.1 Mb

Резино-технические изделия (номенклатура заводов-изготовителей, кольца, манжеты для валов, манжеты для гидравлики, манжеты для пневматики, мембраны, пластины, смеси резиновые, ткани прорезиненные, трубки, шнуры, лента, гидроуплотнения, теплостойкие резины, рентгенозащитные резины, ГОСТы, ОСТ, ТУ, ТО, чертежи 0.1 Мб и т. д.)
14.0 Mb

Рукава (номенклатура заводов, рукава с оплеткой, напорные, всасывающие, высокого давления, дюритовые, антистаические, маслобензостойкие, навивочной конструкции, для кислорода, для газовой сварки, для авиационной техники, прокладочной конструкции, навивочной конструкции, с нитяным каркасом, для нефтепродуктов, гидравлические, для АЭС, для пара, для пищевой промышленности, для промышленной воды, для транспортировки материалов, для транспортных средств, из полиуретана, гибкие трубопроводы из фторопласта, гибкие гофрированные металлорукава, трубки из полиамида, ГОСТы, ТУ, DIN и т. д.)
11.1 Mb

Сантехника (радиаторы, ванны чугунные, пластмассовые, арматура санитарно-техническая водосливная, изделия санитарно-керамические, ГОСТы и т. д)
3.6 Mb

Сваи железобетонные (ГОСТы)
0.9 Mb

Сварочные электроды (свойства импортных электродов, расчет количества электродов, справочник электродов, таблица по применению сварочных электродов ЭСАБ, расчет температуры предварительного подогрева, электроды для резки и строжки, для сварки алюминия и его сплавов, для сварки высокопрочных сталей, для сварки меди и ее сплавов, для сварки нержавеющих и жаростойких сталей, для сварки углеродистых сталей, для сварки чугуна и сплавов на основе никеля, для трудносвариваемых сталей, типы, свойства и т. д)
17.8 Mb

Сварка (руководство по сварке разнородных сталей, нормативные документы - ГОСТы, ОСТы, РД, РТС, ТУ, чертежи 0.5 мб и т. д.)
3.5 Mb

Светотехника (номенклатура изготовителей)
2.7 Mb

Сетки (номенклатура, нормативы)
3.1 Mb

Сетки арматурные (ГОСТы)
0.6 Mb

Смазки и масла (номенклатура, масленки, масла гидравлические, трансмиссионные, трансформаторные, электроизоляционные, турбинные, вакуумные, вертолетные, авиационные, индустриальные, трансмиссионные, компрессорные, для гидромеханических передач, для направляющих скольжения, для прокатных станов, для текстильного оборудования, для тяжелонагруженных редукторов, приборные, теплоносители, для высокоскоростных механизмов, для зубчатых и червячных передач, моторные, осевые, цилиндровые, часовые, электроконтактные. Смазки графитные, УНИОЛ, ЦИАТИМ, ОКБ, ВНИИ НП, МС, АМС, канатные, алюминиевые, железнодорожные, консервационные, ГОСТы, ОСТы, ТУ, чертежи 0.05 мб и т. д.)
20.7 Mb

Сосуды и аппараты (ОТУ-2. Общие технические условия на ремонт корпусов сосудов; ПБ 10-115. Правила устройства и безопасной эксплуатации сосудов; ГОСТ 949 Баллоны стальные для газов; ГОСТ 6533. Днища эллиптические, днища конические; ГОСТ 17341. Устройства для крепления теплоизоляции; ГОСТ 26296. Лапы опорные сосудов и аппаратов; АТК 24.200.03 Опоры-стойки вертикальных сосудов; АТК 24.200.04. Опоры цилиндрические и конические сосудов; ГОСТ 13716. Устройства строповые для сосудов и аппаратов; ОСТ 26-291-94. Сосуды и аппараты; РУА-93. Руководящие указания по ремонту сосудов; ПБ 10-115. Правила устройства и безопасной эксплуатации; ГОСТ 12.2.085. Клапаны предохранительные; ГОСТ Р 51274. Нормы и методы расчета сосудов на прочность; ГОСТ 14249. Расчет сосудов на прочность; ГОСТ 24755. Расчет на прочность укрепления отверстий; РТМ II-4-68. Расчет регистров; ГОСТ 51273. Расчет усилий от ветровых нагрузок на сосуды; ГОСТы, РТМ, АТК, ВСН, ОТУ, РУА, ПБ, ОСТы, чертежи 10.0 Мб и т. д.)
25.7 Mb

Система проектной документации в строительстве ( генпланы, электрическое освещение, трубопроводы, нетиповые эскизные чертежи, водоснабжение и канализация, ГОСТы, СНиПы и др.)
23.0 Mb

Сталь общие сведения (маркировка зарубежных сталей в Европе, США, Японии, переводные таблицы марок сталей, определение углеродного эквивалента и т. д.)
3.0 Mb

Стальные строительные конструкции (лестницы, колонны, пути подвесного транспорта и т. д.)
1.5 Mb

Ступени железобетонные (ГОСТы)
1.4 Mb

Теплоизоляция (номенклатура производителей, нормы проектирования, ГОСТы, ТУ, СНиПы, СП)
5.6 Mb

Теплообменники (номенклатура производителей, теплообменники кожухотрубчатые, аппараты воздушного охлаждения, ГОСТы, ТУ и т. д.)
7.1 Mb

Теплоснабжение (номенклатура, счетчики, радиаторы, грязевики, ванны, фильтры сетчатые, ванны, регуляторы температуры, правила учета тепловой энергии и теплоносителя, давление насыщенного водяного пара, технические характеристики стальных труб тепловых сетей, трубы стальные для водяных сетей, эквиваленты для перевода натурального топлива в условное, нормативы ГОСТы, ТУ)
14.0 Mb

Ткани технические
0.3 Mb

Трубы (номенклатура заводов-изготовителей, справочник по трубам, трубы чугунные, стальные, неметаллические, марки сталей труб, перечень cтандартов на трубы, перечень труб по техническим условиям, трубы прямоугольные, квадратные, овальные, ГОСТы, ТУ, ВСН, СН, СП, DIN, API, ASTM, СНиПы, пособия и т. д.)
40.3 Mb

Уплотнения (номенклатура заводов-изготовителей, уплотнения фторопластовые, торцовые, характеристики асбеста и графита, таблицы химической устойчивости материалов, замазки для уплотнения резьбовых соединений, материал марки ТИИР-752 _ППД, прокладки спирально-навитые, листовой графит, армированный нержавеющей сталью, прокладки овального и восьмиугольного сечения, прокладки плоские эластичные, прокладки фланцевые из материала Графлекс, сальниковая набивка из кевлара, набивки сальниковые, рекомендации по проектированию сальниковых уплотнений, характеристика уплотняемых сред для графита, общие рекомендации, ГОСТы, АТК, ОСТ, ВСН, чертежи 1.6 Мб и т. д.)
38.0 Mb

Факельное хозяйство (номенклатура, ГОСТы, ПБ 09-12. Правила устройства и безопасной эксплуатации факельных систем и т. д.)
1.5 Mb

Фундаменты железобетонные сборные (ГОСТы)
0.5 Mb

Фланцы (свободные на приварном кольце, плоские, с канавками, приварные встык, резьбовые, расчет фланцев, размеры фланцев по ANSI, DIN, крепеж фланцевый, заглушки фланцевые, нормативы, расчеты фланцев, ГОСТы, РД, АТК, ANSI, чертежи 1.3Мб и т. д.)
8.3 Mb

Цветные металлы (номенклатура, ГОСТЫ, ТУ и т. д.)
3.1 Mb

Цемент (ГОСТы, портландцемент, добавки, глиноземистые, для растворов, и др.)
1.7 Mb

Цепи стальные (номенклатура изготовителей)
5.9 Mb

Шифер (ГОСТы)
0.4 Mb

Шпалы железобетонные (ГОСТы)
0.8 Mb

Щебень и песок (ГОСТы, смеси, песок, гравий, щебень и др.)
1.2 Mb

Щиты деревянные (ГОСТы)
1.0 Mb

Электроизоляционные материалы (номенклатура, стеклоткани, ламинаты, компаунды, слюда, эмали, лаки, ленты, лакоткани, препреги, смолы, фольгированные диэлектрики, гетинаксы, текстолиты, стеклотекстолиты, миканиты, Изофлекс 151, пропиточные составы и т. д.) 6.0 Mb

Электромагниты (номенклатура заводов-изготовителей, тормозные, реверсивные, с датчиком перемещения, длинноходовые, маслонаполненные и т. д.)
5.5 Mb

Электромонтажные изделия (номенклатура изготовителей, щитки, ящики управления, шкафы, пункты распределительные, панели, вводно-распределительные устройства, арматура, муфты, наконечники, стойки сальники, профили, кронштейны, коробки, компенсаторы, изоляторы, низковольтные комплектные устройства, держатели и т. д.)
84.0 Mb

Электрооборудование разное (номенклатура изготовителей, Обозначения национальных электротехнических стандартов, электроприводы, электромашинные усилители, трансформаторы, тахогенераторы, станции управления, реле, разъемы и соединители, пускатели, преобразователи частоты, посты управления кнопочные, печатные платы, КТП, контакторы, командоконтроллеры, изоляторы, измерительные приборы, генераторы, возбудители, автоматические выключатели)
40.0 Mb

Электротехника ( правила учета тепловой энергии и теплоносителя, электроустановки строительных площадок, правила безопасности при эксплуатации электроустановок, электрооборудование взрывозащищенное, ПУЭ, правила безопасности при эксплуатации электроустановок и т. п.)
13.8 Mb

Электродвигатели (номенклатура изготовителей, крановые, рольганговые, экскаваторные, для АЭС, многоскоростные, с повышенным скольжением, со встроенным электромагнитным тормозом, балансирные, постоянного тока, тихоходные, автомобильные, погружные масло и водонаполненные, вертикальные, мотор-колесо, электроспуск, трамвайные, лифтовые, шаговые, чертежи 0.2 Мб)
112.0 Mb

Энергосбережение (ГОСТы)
0,8 Mb

Прикрепленные файлы

 opisanie.rar ( 35.08 килобайт ) Кол-во скачиваний: 26

 

[MIHMIH]

musor72 можешь выложить строй технолог или хотяб сказать откуда моно скачать?

P.S. уж ооочень нужны технологические карты...

P.S. уж ооочень нужны технологические карты...

[MIHMIH]

Вот залил книга называется "Земляные работы" Авторы: Беляков Ю.И. Левинзон А.Л. Галимуллин В.А. 1990год 2-ое издание переработанное (138страниц А4). Весит 12,7 Мб

http://slil.ru/23391423 вот ссылка

[Vasya_Novik]

musor72 правда помоги дистром стройтехнолог? Мы постараемся вылечить.

[koster]

Смородинов М.И. (ред) Справочник по общестроительным работам. Основания и фундаменты (1974).djvu
http://ihtik.2x4.ru/stroitel_22dec2006/stroitel_22dec2006_1520.rar

В библиотеке Ихтика много еще можно посмотреть.
http://ihtik.lib.ru/servage_stroitel_22dec2006.html

[KVA]

Энциклопедия Ульмана по химической технологии 500 MB

_http://rapidshare.com/files/70562323/ULMAN.part1.rar
_http://rapidshare.com/files/70568776/ULMAN.part2.rar
_http://rapidshare.com/files/70574717/ULMAN.part3.rar
_http://rapidshare.com/files/70582681/ULMAN.part4.rar
_http://rapidshare.com/files/70590737/ULMAN.part5.rar
_http://rapidshare.com/files/70634539/ULMAN.part6.rar

[Ashfall_123]

Все инженерам-проектировщикам рекомендую просто офигенный справочник проектировщика - "Расчетно-теоретический" под ред. Уманского. Лично мне оч хочется поиметь оный в бумажном варианте, но почему то в настоящее время сложилась такая тенденция, что хороших книг издают довольно мало. А жаль. Качайте, пользуйтесь.
ТОМ 1._http://ihtik.2x4.ru/stroitel_22dec20...c2006_1570.rar
ТОМ 2._http://ihtik.2x4.ru/stroitel_22dec20...c2006_1571.rar
Следующий справочник проектировщика посвящается всем кто проектирует МК. Это справочник под ред. Мельникова (ЦНИИПСК, г.Москва)
http://ihtik.2x4.ru/stroitel_22dec20...c2006_1572.rar

[fiks81]

Справочник архитектора. Том VIII «Конструкции гражданских зданий», Москва, 1946 г.

_http://rapidshare.com/files/79016046/Spravochnik_arhitektora_1946.djvu.html

[fiks81]

Справочник проектировщика. Основания, фундаменты и подземные сооружения. (Под общей редакцией Е.А.Сорочана. Москва, Стройиздат, 1985 г.)
_http://rapidshare.com/files/79018496/Sorochan___Spravochnik_proektirovschika_OiF.djvu.html

Справочник конструктора. Стальные конструкции. (Под общей редакцией А.В.Шимановского. Киев, 2004 г.)
_http://rapidshare.com/files/79019622/Spravochnik_konstruktora__stalnye_konstruktsii_.djvu.html

[Ador]

Строительные конструкции

Год выпуска: 2005
Автор: Маилян Р.Л.
Формат: DjVu
Количество страниц: 880
Размер: 13Мб

Описание: Учебное пособие по ЖБК, металлу и дереву.

_http://depositfiles.com/ru/files/2560503

[rus_h]

Всем привет!
С Новым Годом!!!
Помогите, пожалуйста, найти литературу по кранам (грузоподъемным).
Типа справочник по кранам.
А точнее интересуют мостовые краны.
Заранее благодарен.

[noiza]

Шелихов С.Н., Монахов Н.И., Зеликман Д.И. Справочное пособие заказчика-застройщика.

может есть у кого?

[Eva_star]

ВНТП-01-81 Ведомственные нормы технологического проектирования объектов телевидения, радиовещания и телекинопроизводства.
Может у кого есть, или подскажите где найти?
Спасибо.

[GSV72]

Б.И.Далматов. "Механика грунтов, основания и фундаменты (включая специальный курс инженерной геологии)"
Размер: 29,82 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Н.М.Глотов и др. "Основания и фундаменты мостов. Справочник"
Размер: 2,18 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Сорочан Е.А. и др. "Основания, фундаменты и подземные сооружения. Справочник проектировщика"
Размер: 49,5 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

А.И.Полищук. "Основы проектирования и устройства фундаментов реконструируемых зданий"
Размер: 3,72 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Руководство по проектированию плитных фундаментов каркасных зданий и сооружений башенного типа. НИИОСП им. Н.М.Герсеванова
Размер: 7,4 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

М.И.Смородинова. "Справочник по общестроительным работам. Основания и фундаменты"
Размер: 8,89 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Схемы усиления фундаментов
Размер: 694,19 KB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Фундаменты все виды. Боданов Ю.Ф. Фундаменты от А до Я
Год издания 2005
Специальный раздел посвящен ремонту или замене фундамента.
Размер: 5,41 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Пилягии А.В.
Проектирование оснований и фундаментов зданий и сооружений: Учебное пособие. - М.: Издательство Ассоциации строительных вузов, 2006. - 248 с.
В учебном пособии приведены методы проектирования оснований и фундаментов различных типов при различных схемах загружения, способствующие повышению экономической эффективности проектных решений.
Размер: 3,15 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

[GSV72]

Сажнев М.П. и др. - Как построить индивидуальный жилой дом из ячеистого бетона (2003)
В книге в популярной форме изложена последовательность действий индивидуального застройщика в процессе возведения жилого дома из ячеистого бетона. На примере многочисленных иллюстраций показано, как обустроить строительную площадку, разметить и заложить фундамент, вывести стены цокольного, первого, второго и мансардного этажей, установить столярные изделия и выполнить кровельные работы.
Размер: 3,28 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Н.П.Умнякова. Как сделать дом теплым
В книге затрагиваются вопросы передачи тепла через различные строительные конструкции, предложены варианты выбора типа стен, перекрытий, крыш, окон в зависимости от климатических условий района строительства.
Рассмотрены современные строительные тепло-, гидро- и пароизоляционные материалы, которые могут быть использованы при строительстве индивидуальных домов и для дополнительного утепления квартир. Даны рекомендации по утеплению существующих стен, окон, перекрытий, изложены также возможные варианты отопления садовых домиков.
Размер: 4,64 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Кутухтин Е.Г. Коробков В.А. "Конструкции промышленных и сельскохозяйственных зданий и сооружений"
Учебное пособие 2-е изд.,перераб и доп.
-М.:Архитектура-С. 2007
Размер: 16,14 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

МАЛОЭТАЖНОЕ ГОРОДСКОЕ ЖИЛИЩЕ каталог проектов ЦНИИЭП - 1992
Размер: 19,03 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Проектирование и строительство. Дом, квартира, сад
Эта книга должна помочь заказчику и молодому проектировщику при проектировании дома, квартиры и сада. Она дает основополагающие знания о проектировании ванной, кухни, столовой, общей комнаты, спальни и подсобных помещений и станет верным советником при строительстве или перестройке. Словарь специальных терминов разъясняет значение более 300 специальных слов и выражений, помогая тем самым общению застройщика и архитектора. В третьем издании появились новые разделы: кабинет, обустройство чердака, сборное строительство, хранение жидкого топлива, строительство деревянных домов, модернизация, образцы классической мебели, кладовые, винный погреб. Предназначена для студентов архитектурных и строительных вузов, а также для широкого круга читателей.
Размер: 20,83 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

Маилян Р.Л., Маилян Д.Р., Веселев Ю.А. "Строительные конструкции"
В пособии рассмотрены особенности строительных конструкций из различных материалов, физико-механические свойства материалов, результаты экспериментальных и теоретических исследований работы конструкций под нагрузкой, приемы конструирования и расчета по предельным состояниям и др.
Уделено внимание учету технико-экономических факторов при проектировании строительных конструкций. Отмечено значение индустриальных типовых конструкций из сборного предварительно напряженного железобетона и конструкций из эффективных материалов (алюминиевых сплавов, пластмасс и др.).
Размер: 12,44 MB

Зарегистрироваться
Написать 5 сообщений (5 осталось)

[GSV72]

Райхель В., Конрад Д. Бетон: В 2-х ч. Ч. 1. Свойства. Проектирование. Испытание. Пер. с нем./Под ред. В. Б. Ратинова. — М.: Стройиздат, 1979. — 111с.
Размер: 3.06 Мб

Написать 5 сообщений (5 осталось)

В.Н.Байков, Е.Е.Сигалов. "Железобетонные конструкции".
Размер: 7.02 Мб

Написать 5 сообщений (5 осталось)

Берг О. Я., Щербаков Е. Н., Писанко Г. Н. Высокопрочный бетон. — М.: Стройиздат, 1981— 208 с.
Размер: 3,99 MB

Написать 5 сообщений (5 осталось)

Усиление железобетонных конструкций производственных зданий и просадочных оснований под ред. А.Б.Голышева
Размер: 2,99 MB

Написать 5 сообщений (5 осталось)

А.П.Кричевский. "Расчет железобетонных инженерных сооружений на температурные воздействия".
Размер: 1,74 MB

Написать 5 сообщений (5 осталось)

А. М. Невилль. Свойства бетона / Пер. с англ. В.Д. Парфенова и Т.Ю. Якуб. — М.: Стройиздат, 1972. — 344с.
Размер: 6,32 MB

Написать 5 сообщений (5 осталось)

Расчет железобетонных конструкций при сложных деформациях. Под ред. М. С. Торяника. — М., Стройиздат, 1974. — 297 с. Авт.: Торяник М. С, Вахненко П. Ф., Фалеев Л. В. и др.
Размер: 5,48 MB

Написать 5 сообщений (5 осталось)

[astaphyev]

Помогите найти литературу по проектированию бункеров и силосов (металл).

[Саня!]

И мне очень нужен. Если вдруг попадется поделись ссылкой. Зарание спс.

И мне очень нужен "Справочное пособие заказчика-застройщика" Шелихов. Если вдруг попадется поделись ссылкой. Зарание спс.

[Esquare]

_http://engenegr.ru/tehnicheskaya_literatura очень хорошая библиотека электронных книг

[Саня!]

Нашел бумажный носитель "Справочное пособие заказчика-застройщика" Шелихов. Отсканировал первые 5 разделов. Весит 28 Мб. Скачать можно тут http://sany7.ucoz.ru/load/

Сообщение отредактировал Саня! - 6.01.2009 - 18:55

[большой ден]

Существует такой учебник по ЖБК авторы Бондаренко, Суворкин. В библиотеках его весь растащили. Неужели ниукго нет?

[vedeks]

Технологические карты для нуждающихся
http://narod.ru/disk/3423122000/Kodeks%20Stroytexnolog.iso.html

[DeMarko]

у кого есть "Районная планировка. Справочник проектировщика" Стройиздат 1986 г.???

[GrizzlyXXX]

astaphyev, Можа паможа.
http://ifolder.ru/9463322
Ягофаров Х. Гибкие бункера. М., Стройиздат, 1980, 168 с.
Обобщен опыт проектирования, строительства и эксплуатации гибких бункеров. Приведена классификация существующих конструктивных решений и способов расчета гибких бункеров. Разработаны предложения по совершенствованию конструкций и уточнения расчета гибких бункеров, в том числе с учетом работы пространственных сплошных балок….

[Саня!]

Шелихов С.Н., Монахов Н.И., Зеликман Д.И. Справочное пособие заказчика-застройщика. можно скачать бесплатно первые 5 разделов.
Вот ссыла http://sany7.ucoz.ru/load/
Если нетрудно кликните по рекламе

[kaa_22]

Ищу каталог конвеерного оборудования Союзпроммеханизация. Каталог существует но найти не могу.


Ищу каталог (возножно такой есть) Циклоны ЦН

[XAMbE]

У кого имеется сей манускрипт? Справочное пособие "Исполнительная документация в строительстве" Санкт-Петербургского отделения Общероссийского общественного фонда "Центр качества строительства" 2008 г.
Заранее благодарен тем кто выложит в свободный доступ.

[gpslava]

Ищу книги на русском языке по по всему Autodesk Robot Structural™ Analysis Professional.
Очень надо обучиться.

[Саня!]

Шелихов С.Н., Монахов Н.И., Зеликман Д.И. Справочное пособие заказчика-застройщика.

может есть у кого?

Есть первые 5 разделов http://sany7.ucoz.ru/load/

[Саня!]

Помогите найти "Мановян А.К. -Технология первичной переработки нефти и природного газа " зарание спс.

[maloizzz]

Люди если кто может помогите!!! Нужен: Справочник Справочная энциклопедия дорожника. Том I. Строительство и реконструкция автомобильных дорог

[Саня!]

Помогите найти "Мановян А.К. -Технология первичной переработки нефти и природного газа " зарание спс.

Сам нашел, вот ссылка откуда можно скачать бесплатно=>http://sany7.ucoz.ru/load/

[447761]

У кого имеется сей манускрипт? Справочное пособие "Исполнительная документация в строительстве" Санкт-Петербургского отделения Общероссийского общественного фонда "Центр качества строительства" 2008 г.
Заранее благодарен тем кто выложит в свободный доступ. ----------------посмотри на dwg.ru

[инженерик]

Всем привет!
Помогите пожалуйста найти хоть что нибудь про шарнирный затвор ГС 140-300 (какие рамеры у него могут быть)

[istigatore]

Handbooks, Ebooks, Manuals for petroleum geologists, geophysicists, and and engineers




Petrophysics, Second Edition: Theory and Practice of Measuring Reservoir Rock and Fluid Transport Properties
ISBN: 0750677112 | Authors: Erle C. Donaldson, Djebbar Tiab Professor | Prize: 132$ On Amazon



The petroleum geologist and engineer must have a working knowledge of petrophysics in order to find oil reservoirs, devise the best plan for getting it out of the ground, then start drilling. This book offers the engineer and geologist a manual to accomplish these goals, providing much-needed calculations and formulas on fluid flow, rock properties, and many other topics that are encountered every day. New updated material covers topics that have emerged in the petrochemical industry since 1997. * Contains information and calculations that the engineer or geologist must use in daily activities to find oil and devise a plan to get it out of the ground * Filled with problems and solutions, perfect for use in undergraduate, graduate, or professional courses * Covers real-life problems and cases for the practicing engineer

DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/8hj1d5adntxb/0750677112.rar.html
or
http://www.filezlot.com/de0uarrwm2j9/0750677112.rar.html
or
http://hotfile.com/dl/35265856/a536721/0750677112.rar.html

Stratigraphic reservoir characterization for petroleum geologists, geophysicists, and engineers, Volume 6 (Handbook of Petroleum Exploration and Production)
Publisher: Elsevier Science | ISBN: 0444528180 | Authors: Roger M. Slatt | Prize: 132$ on Amazon



Reservoir characterization as a discipline grew out of the recognition that more oil and gas could be extracted from reservoirs if the geology of the reservoir was understood. Prior to that awakening, reservoir development and production were the realm of the petroleum engineer. In fact, geologists of that time would have felt slighted if asked by corporate management to move from an exciting exploration assignment to a more mundane assignment working with an engineer to improve a reservoir's performance. Slowly, reservoir characterization came into its own as a quantitative, multidisciplinary endeavor requiring a vast array of skills and knowledge sets. Perhaps the biggest attractor to becoming a reservoir geologist was the advent of fast computing, followed by visualization programs and theaters, all of which allow young geoscientists to practice their computing skills in a highly technical work environment. Also, the discipline grew in parallel with the evolution of data integration and the advent of asset teams in the petroleum industry. Finally, reservoir characterization flourished with the quantum improvements that have occurred in geophysical acquisition and processing techniques and that allow geophysicists to image internal reservoir complexities.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/y8sn59o8pfdx/0444528180.rar.html
or
http://hotfile.com/dl/35248424/3627022/0444528180.rar.html

Сообщение отредактировал istigatore - 28.04.2010 - 23:39

[istigatore]

Seismic Stratigraphy, Basin Analysis and Reservoir Characterisation, Volume 37 (Handbook of Geophysical Exploration: Seismic Exploration)
Publisher: Elsevier Science | ISBN: 0080453112 | Authors: Paul P. Veeken | Prize: 189$ on Amazon



The interest in seismic stratigraphic techniques to interpret reflection datasets is well established. The advent of sophisticated subsurface reservoir studies and 4D monitoring, for optimising the hydrocarbon production in existing fields, does demonstrate the importance of the 3D seismic methodology. The added value of reflection seismics to the petroleum industry has clearly been proven over the last decades. Seismic profiles and 3D cubes form a vast and robust data source to unravel the structure of the subsurface. It gets nowadays exploited in ever greater detail. Larger offsets and velocity anisotropy effects give for instance access to more details on reservoir flow properties like fracture density, porosity and permeability distribution, Elastic inversion and modelling may tell something about the change in petrophysical parameters. Seismic investigations provide a vital tool for the delineation of subtle hydrocarbon traps. They are the basis for understanding the regional basin framework and the stratigraphic subdivision. Seismic stratigraphy combines two very different scales of observation: the seismic and well-control. The systematic approach applied in seismic stratigraphy explains why many workers are using the principles to evaluate their seismic observations. The here presented modern geophysical techniques allow more accurate prediction of the changes in subsurface geology. Dynamics of sedimentary environments are discussed with its relation to global controling factors and a link is made to high-resolution sequence stratigraphy. 'Seismic Stratigraphy Basin Analysis and Reservoir Characterisation' summarizes basic seismic interpretation techniques and demonstrates the benefits of intergrated reservoir studies for hydrocarbon exploration. Topics are presented from a practical point of view and are supported by well-illustrated case histories. The reader (student as well as professional geophysicists, geologists and reservoir engineers) is taken from a basic level to more advanced study techniques. * Discusses the link between seismic stratigraphic principles and sequence stratigraphy * Provides techniques for seismic reservoir characterization, as well as well control * Analyzes inversion, AVO and seismic attributes
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/18484685/efc4ed6/0080453112.rar.html
or
http://www.filezlot.com/0gp83grhom97/0080453112.rar.html
or
http://hotfile.com/dl/35216068/6b8619d/0080453112.rar.html

Сообщение отредактировал istigatore - 28.04.2010 - 23:34

[istigatore]

Applied Geothermics for Petroleum Engineers (Developments in Petroleum Science)
Publisher: Elsevier Science | ISBN: 0444828877 | Authors: I.M. Kutasov | Prize: 150$ on Amazon



The purpose of Applied Geothermics for Petroleum Engineers is to present in a clear and concise form methods of utilizing the data of temperature surveys in deep boreholes as well as the results of field, laboratory and analytical investigations in geothermics to a wide audience. Although some aspects of the subject of this book have been discussed in several previous books and numerous papers, A pplied Geothermics for Petroleum Engineers is the first book on this topic available to the petroleum engineering community. The objective of the book is to present the state of knowledge and prediction of downhole and formations temperatures during well drilling, well completion, shut-in and production. Applied Geothermics for Petroleum Engineers is intended for drilling engineers (impact of elevated temperatures on well drilling and completion technology, Arctic drilling), production engineers (temperature regime of production, injection and geothermal walls, Arctic production), reservoir engineers (temperature field of reservoirs, thermal properties of formations and formation fluids), well logging engineers (interpretation of electrical resistance, mud density, and temperature logs), and geophysicists and geologists (interpretation of geophysical data, calculation of the terrestrial heat flow, reconstruction of past climates).
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/17584947/a4fb55d/0444828877.rar.html
or
http://www.filezlot.com/3y0a48dkq9rx/0444828877.rar.html

[istigatore]

SME Mining Engineering Handbook, 2 Volume Set (Second Edition)
Publisher: Society for Mining Metallurgy & Exploration | ISBN: 0873351002 | Authors: I. A. Given | Cost: 136$ on Amazon



The SME all-time bestseller 2-volume set is a classic. This comprehensive reference work distills the entire body of knowledge that characterizes mining engineering as a disciplinary field. While it may serve as a textbook for advanced students, its primary function is to provide professional practitioners with an authoritative reference and design source. To a lesser extent, the book also serves mining nonprofessionals who seek technical knowledge of the industry. The books devote attention to all branches of mining--metal, coal, and nonmetal--and to all locales of mining--surface, underground, and hybrid. Although the main emphasis is US mining, numerous references are made to international practice. More than 250 experts contributed to this text. The books contain 25 sections followed by a complete index.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/yoo2nq3n5o2t/0873351002.rar.html
or
http://www.filezlot.com/kx4j5wyrny18/0873351002.rar.html
or
http://hotfile.com/dl/35282590/2a9309a/0873351002.rar.html

[istigatore]

Air and Gas Drilling Field Guide: Applications for Oil and Gas Recovery Wells and Geothermal Fluids Recovery Wells, 3rd Edition
Publisher: Gulf Professional Publishing | ISBN: 0123708958 | Authors: William C. Lyons PhD PE | Cost: 89$ On Amazon



The third edition of Air and Gas Drilling describes the basic simulation models for drilling deep wells with air or gas drilling fluids, gasified two-phase drilling fluids, and stable foam drilling fluids. The models are the basis for the development of a systematic method for planning under balanced deep well drilling operations and for monitoring the drilling operation as well as construction project advances. Air and Gas Drilling discusses both oil and natural gas industry applications, and geotechnical (water well, environmental, mining) industry applications. Important well construction and completion issues are discussed for all applications. The engineering analyses techniques are used to develop pre-operations planning methods, troubleshooting operations monitoring techniques and overall operations risk analysis. The essential objective of the book is drilling and well construction cost management control. The book is in both SI and British Imperial units. *Master the air and gas drilling techniques in construction and development of water wells, monitoring wells, geotechnical boreholes, mining operations boreholes and more *30% of all wells drilled use gas and air, according to the U.S. Department of Energy estimates *Contains basic simulation equations with examples for direct and reverse circulation drilling models and examples for air and gas, gasified fluids, and stable foam drilling models
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/17564319/ecdb7e7/0123708958.rar.html
or
http://www.filezlot.com/p7n52gz8sfb3/0123708958.rar.html

[istigatore]

Petroleum Processing Handbook
Publisher: CRC Press | ISBN: 0824786815 | Cost: new->404$ used>110$ On Amazon



A reference that details the pertinent chemical reactions and emphasizes the plant design and operations of petroleum processing procedures. The handbook is divided into four sections: products, refining, manufacturing processes, and treating processes. Wherever possible, shortcut methods of calcula

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/p8q0ybd0icd7/0824786815.rar.html
or
http://hotfile.com/dl/35278694/c1bd0bf/0824786815.rar.html

[istigatore]

Collection of Civil Engineering Ebooks For Enginers and Geotechnicals


Computational Structural Dynamics and Earthquake Engineering (Structures and Infrastructures)
Publisher: Taylor & Francis | ISBN: 0415452619 | Cost: 180$ On Amazon



The increasing necessity to solve complex problems in Structural Dynamics and Earthquake Engineering requires the development of new ideas, innovative methods and numerical tools for providing accurate numerical solutions in affordable computing times. This book presents the latest scientific developments in Computational Dynamics, Stochastic Dynamics, Structural Dynamics and Earthquake Engineering in thirty-five self-contained contributions. The selected state-of-the-art chapters are revised and extended versions of the papers which were presented as plenary, semi-plenary and keynote lectures at the thematic COMPDYN 2007 Conference. This volume will benefit researchers and engineering professionals working on structural dynamics, earthquake engineering and computational mechanics. Readers will get acquainted with advanced computational methods and software tools, which can assist them in tackling complex problems in dynamic/seismic analysis and design. Moreover, it will raise the awareness of important application areas and the social impact of the scientific and technical fields involved.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/r03eyr3shoou/0415452619.rar.html
or
http://hotfile.com/dl/35229884/6314f00/0415452619.rar.html

Сообщение отредактировал istigatore - 1.05.2010 - 21:33

[istigatore]

Highway Meteorology
Publisher: Taylor & Francis | ISBN: 0419156704 | Cost: 230$ On Amazon



Roads that are safe in all weathers are a prerequisite of modern society, and large amounts of money are spent, especially in winter, to make travel safe. This book brings together international expertise on planning 'weather proof' roads, operating safe road networks in bad weather and coping effectively with accidents. The performance and cost effectiveness of new technology (ice detection systems, thermal mapping, weather radar etc) are reviewed.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/yicciaq6s71h/0419156704.rar.html
or
http://www.filezlot.com/nswijq33kl1s/0419156704.rar.html
or
http://hotfile.com/dl/35247885/7d59f1e/0419156704.rar.html

[megastr]

Большущая Благодарность!!!

[istigatore]

Slope Stability Analysis and Stabilization: New Methods and Insight
Publisher: Taylor & Francis | ISBN: 0415421721 | Authors: YM Cheng, CK Lau | Cost: 128$ On Amazon



A number of methods currently exist for the analysis and design of slopes. This book provides a critical review of these and offers several more appropriate approaches for overcoming numerical convergence and the location of critical failure surfaces in two-dimensional and three-dimensional cases. New concepts in three-dimensional stability analysis, finite element analysis and the extension of slope stability problems to lateral earth pressure problems are also addressed. It gives helpful practical advice and design resources in the form of recommendations for good analysis and design practice, design charts and tables for the engineer. Limitations are detailed of both limit equilibrium and the finite element method in the assessment of the stability of a slope, and guidance is provided for assessing the fundamental assumptions and limitations of stability analysis methods and computer modelling. The book provides ample examples to illustrate how this range of problems should be dealt with. The final chapter touches on design and its implementation on site. The emphasis is on the transfer of the design to its physical implementation on site in a holistic way, taking full account of the latest developments in construction technology. Engineering and construction problems tend to be pigeonholed into different classes of problem such as slope stability, bearing capacity and earth pressure behind retaining structures. This is quite unnecessary. This book offers a unified approach, which is conceptually, practically and philosophically more satisfying.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/nc8tszc9cwhm/0415421721.rar.html
or
http://www.filezlot.com/6jvfcw3p4gxg/0415421721.rar.html
or
http://hotfile.com/dl/35229817/fbf142c/0415421721.rar.html

[istigatore]

Enclosure Masonry Wall Systems Worldwide: Typical Masonry Wall Enclosures in Belgium, Brazil, China, France, Germany, Greece, India, Italy, Nordic Countries, Poland, Portugal, the Netherlands and USA
Publisher: Taylor & Francis | ISBN: 0415425778 | Cost: 99$ on Amazon



Enclosure walls have a key role in building construction, providing structural safety and protecting interiors from intrusion. The concept of an enclosure wall is a traditional one, common to the building history of many countries. There is a tremendous variety in types of enclosure walls, depending on such variables as climate and local technologies. Progress in these traditional practices has been stimulated by new national and international standards in the construction industry. These standards have contributed to improvements in areas such as thermal insulation and earthquake resistance and have promoted the development of new materials and methods in enclosure wall construction. The aim of this book, by the Commission on Wall Structures of the International Council for Building (CIB), is to select certain countries or regions, and examine enclosure masonry walls which are perceived as being typical. For each example, the following are considered: characterization of the building sector; the customary materials used in masonry; typical problems and solutions for enclosure walls; and evolutionary trends.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/17582874/a8a198d/0415425778.rar.html
or
http://www.filezlot.com/7rtzliaa3tom/0415425778.rar.html

[istigatore]

Concrete Design to EN 1992, Second Edition
Publisher: Butterworth-Heinemann | ISBN: 0750650591 | Authors: Lawrence Martin, John A Purkiss | Cost: 70$ on Amazon



The transition from national standards for concrete structural design to Eurocode EN 1992 is the biggest change to concrete design for decades. This new edition of Concrete Design explains the key differences between BS8110 and EN1992, and teaches the fundamentals of the design of concrete structures to comply with the Eurocodes. With many illustrations and worked examples, this accessible textbook teaches the essentials of concrete design to EN1992 to students and professionals alike. * Full coverage of the concrete structural Eurocode * Detailed worked examples and tutorial problems * Analysis of the key changes from the old national standards

DDL RS

» Click to show Spoiler - click again to hide... «

http://rapidshare.com/files/206879754/Concrete_design_to_EN_1992.pdf

And here is a partial upgrade to 2008...It's a PowerPoint Presentation in PDF

» Click to show Spoiler - click again to hide... «

http://eurocodes.jrc.ec.europa.eu/doc/WS2008/EN1992_1_Walraven.pdf

More infos on http://eurocodes.jrc.ec.europa.eu/

[megastr]

А есть книги по Металлическм конструкциям? )

[istigatore]

Industrial Engineering Projects
Taylor & Francis (October 16, 1998) | ISBN: 0419225102 | PDF | 320 pages | 9.6 Mb



Provides a clear basic understanding of the commercial, contractual & statutory matters which affect the life of an engineering project, from feasiblility, through commissioning, to operation.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/38700269/b07703a/5102Engineering.rar.html
or
http://depositfiles.com/files/c8iu93ukx

[istigatore]

Civil Engineering Formulas
Publisher: McGraw-Hill Professional; 2 edition | 2009 | 416 Pages | ISBN: 0071614699 | PDF | 4.2 MB



Fully updated and packed with more than 500 new formulas, this book offers a single compilation of all essential civil engineering formulas and equations in one easy-to-use reference. Practical, accurate data is presented in USCS and SI units for maximum convenience. Follow the calculation procedures inside Civil Engineering Formulas, Second Edition, and get precise results with minimum time and effort. Each chapter is a quick reference to a well-defined topic.


....Only torrent.....from demonoid

Сообщение отредактировал istigatore - 3.05.2010 - 17:45

Прикрепленные файлы

 Civil_Engineering_Formulas_2009.rar ( 4.8 килобайт ) Кол-во скачиваний: 94

 

[istigatore]

Geology for Civil Engineers
Taylor & Francis; 2 edition (September 1, 1985) | ISBN: 0419160000 | PDF | 336 pages | 9.5 Mb



The investigation of the suitability and characteristics of sites as they affect the design and construction of civil engineering works and the security of neighbouring...
..Old ebook, but always useful....
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/38224679/8524e72/0000CivilEngineers.rar.html
or
http://depositfiles.com/files/q5jadnmu0

[istigatore]

Drilling Engineering: A Complete Well Planning Handbook
Pennwell Corp | 1985 | ISBN: 0878142657 | 976 pages | PDF | 81,9 MB



DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/40819109/d761a18/0878142657Drilling.rar.html
or
http://rapidshare.com/files/382544875/0878142657Drilling.rar

[istigatore]

Fundamentals of Numerical Reservoir Simulation (Developments in Petroleum Science)
Publisher: Elsevier Science | ISBN: 0444415785 | Authors: D.W. Peaceman | Cost: 249$ On Amazon



Peaceman is one of the pioneers of applied numerical analysis. His book fills the too long vacant gap... An important reference for geologists, chemical and petroleum engineers, and numerical analysts for years to come.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/60a1d2snedbl/0444415785.rar.html
or
http://hotfile.com/dl/35248217/352ef22/0444415785.rar.html

Сообщение отредактировал istigatore - 4.05.2010 - 17:59

[istigatore]

The Foundation Engineering Handbook
Published by CRC Press | Publication date : January 2006 | ISBN : 020348441X | PDF | 625 pages | English | 7.2 MB



Great strides have been made in the art of foundation design during the last two decades. In situ testing, site improvement techniques, the use of geogrids in the design of retaining walls, modified ACI codes, and ground deformation modeling using finite elements are but a few of the developments that have significantly advanced foundation engineering in recent years. What has been lacking, however, is a comprehensive reference for foundation engineers that incorporates these state-of-the-art concepts and techniques.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/37195672/a431acc/The_Foundation_Engineering_Handbook.rar.html
or
http://www.megaupload.com/?d=LRZ28C1X

[istigatore]

A rich collection of books regarding the Petroleum Reservoir.....
from demonoid..

List of books..:
Advances in Resevoir Geology.pdf 52.85 MB
An Introduction In Reservoir Fluid Properties.pdf 21.69 MB
Applied Petroleum Resevoir Eng..pdf 21.72 MB
Applied Petroleum Resevoir/Applied Petroleum Resevoir Vol-1.pdf 64.40 MB
Applied Petroleum Resevoir/Applied Petroleum Resevoir Vol-2.pdf 60.04 MB
Basics of Reservoir Engineering.pdf 17.08 MB
Carbonate Resevoir Characteriztion.pdf 28.85 MB
Dr Hamed Notes.pdf 4.75 MB
Elsevier - Advanced Reservoir Engineering - 2004 - (By Laxxuss).pdf 9.61 MB
Fundamentals of Numerical Reservoir Simulation-Peacema.pdf 6.31 MB
Fundamentals of Resevoir Eng..pdf 15.90 MB
Geophysics Of Resevoir And Civil Engineering.PDF 73.45 MB
Natural Reservoir Engineering.pdf 20.63 MB
Petroleum Geology and Reservoirs (By Aramco).pdf 1.59 MB
Petroleum Res. Eng. Method.pdf 34.40 MB
Petroleum Res. Eng. Physical Properties.pdf 31.28 MB
Petroleum Reservoir Engineering (By James W. Amyx).pdf 31.28 MB
PRACTICAL RESERVOIR MONITORING/00-0verview.pdf 87.90 KB
PRACTICAL RESERVOIR MONITORING/01-Distributed Pressures.pdf 4.72 MB
PRACTICAL RESERVOIR MONITORING/021-Well Testing Overview.pdf 2.96 MB
PRACTICAL RESERVOIR MONITORING/022-Diffusivity.pdf 143.20 KB
PRACTICAL RESERVOIR MONITORING/023-WTI methodology.pdf 389.19 KB
PRACTICAL RESERVOIR MONITORING/024-WTI models.pdf 897.46 KB
PRACTICAL RESERVOIR MONITORING/025-Gas and Limit Testing.pdf 253.66 KB
PRACTICAL RESERVOIR MONITORING/026-WFT testing.pdf 2.34 MB
PRACTICAL RESERVOIR MONITORING/031-PL Measurements.pdf 3.08 MB
PRACTICAL RESERVOIR MONITORING/032-PL Interpretation.pdf 4.94 MB
PRACTICAL RESERVOIR MONITORING/033-PL in HW's.pdf 517.92 KB
PRACTICAL RESERVOIR MONITORING/034-Production Testing and LRT.pdf 536.81 KB
PRACTICAL RESERVOIR MONITORING/035-NODAL.pdf 151.97 KB
PRACTICAL RESERVOIR MONITORING/036-Reservoir Pressure (Recap).pdf 72.61 KB
PRACTICAL RESERVOIR MONITORING/041-Waterflooding.pdf 1.08 MB
PRACTICAL RESERVOIR MONITORING/042-Saturation Monitoring.pdf 5.63 MB
PRACTICAL RESERVOIR MONITORING/043-Material Balance.pdf 186.96 KB
PRACTICAL RESERVOIR MONITORING/051-Water Conformance.pdf 960.46 KB
PRACTICAL RESERVOIR MONITORING/061-Fluid Sampling.pdf 3.57 MB
PRACTICAL RESERVOIR MONITORING/071-Permanent Monitoring.pdf 108.64 KB
Staged Field Experiment/Staged Field Experiment-volume 1(1).pdf 16.81 MB
Staged Field Experiment/Staged Field Experiment-volume 1(2).pdf 11.24 MB
Staged Field Experiment/Staged Field Experiment-volume 2.pdf 19.83 MB
Staged Field Experiment/Staged Field Experiment-volume 4.pdf 19.40 MB

total size: 596MB
here the torrent....

Сообщение отредактировал istigatore - 4.05.2010 - 23:31

Прикрепленные файлы

 Demonoid.com_Petroleum_Reservoir_Eng__PDF_Collection__596MB.rar ( 15.06 килобайт ) Кол-во скачиваний: 78

 

[Visik]

Спасибо, с http://www.MegaShare.com/1767275 все скачалось =)

[istigatore]

W.F. Chen, J.Y. Richard Liew, "The Civil Engineering Handbook, 2 Ed"
CRC; 2 ed | 2002 | ISBN: 0849309581 | 2904 pages | PDF | 30,2 MB



First published in 1995, the award-winning Civil Engineering Handbook soon became known as the field's definitive reference. To retain its standing as a complete, authoritative resource, the editors have incorporated into this edition the many changes in techniques, tools, and materials that over the last seven years have found their way into civil engineering research and practice.The Civil Engineering Handbook, Second Edition is more comprehensive than ever. You'll find new, updated, and expanded coverage in every section. In fact, more than 1/3 of the handbook is new or substantially revised. In particular you'll find increased focus on computing reflecting the rapid advances in computer technology that has revolutionized many aspects of civil engineering. You'll use it as a survey of the field, you'll use it to explore a particular subject, but most of all you'll use The Civil Engineering Handbook to answer the problems, questions, and conundrums you encounter in practice
DDLS

» Click to show Spoiler - click again to hide... «

http://uploading.com/files/2XZ24MCC/CivilEngin.zip.html
or
http://depositfiles.com/files/pu3o7yue1

[istigatore]

Civil Engineering - The Wiley Dictionary of Civil Engineering and Construction
Wiley | 1997 | ISBN: 0471181153 | PDF | 688 pages | 52 Mb



The Wiley Dictionary of Civil Engineering and Construction provides comprehensive coverage of a broad range of technical disciplines. The definitions are designed to be of use to professionals in architecture, engineering, surveying, building, construction, forestry, mining, and public works. Entries include terms, concepts, names, abbreviations, tools, and techniques common to these disciplines, and virtually all terms and their functions were supplied by working professionals and experts in each field.

More than 30,000 definitions and descriptions, including many that are not covered in other dictionaries

* Written with the support and assistance of nearly 100 manufacturers, trade associations, government agencies, and specialists
* All terms arranged alphabetically; many grouped according to logical common topics; thoroughly cross-referenced
* All weights, volumes, and spatial dimensions presented in both metric and nonmetric values (conversion factors included).
DDLS

» Click to show Spoiler - click again to hide... «

http://uploadbox.com/files/ojgQ0cW1tX
or
http://uploading.com/files/KY4F5HNZ/cbfCivilEngineeringandConstruction_0471181153.rar.html
or
http://depositfiles.com/files/jzcuehsei

[istigatore]

Alberto Bernardini, Fulvio Tonon, "Bounding Uncertainty in Civil Engineering: Theoretical Background"
Springer | 2010 | ISBN: 3642111890 | 350 pages | PDF | 3,5 MB



In engineering contexts, random sets are useful when there is scarce or imprecise information as well as when a model for the engineering system is imprecise (e.g., discretization errors, different competing models, upper and lower bounds in limit analysis). Random sets generalize the concept of random variables from point measures to set measures; equivalently, they embody a convex set of probability measures.

Taking an engineering approach rather than a mathematical one, Random Sets in Civil Engineering is a gentle introduction to the subject that does not require advanced mathematical knowledge. Basic ideas and methods are presented and demonstrated with the aid of simple worked-out examples and suggested problems. Connections are clarified to the more general theory of imprecise probabilities and to other non classical models of uncertainty and approximate reasoning in decision making (e.g., fuzzy sets and evidence theory).

The book serves as a reference for practicing engineers involved in planning, design, construction and management of civil infrastructures, as well as a graduate-level textbook. Readers interested in uncertainty modelling will find general solutions and algorithms, which may also be applied to problems in other fields beyond engineering.

In the second volume of the book (to be planned in the future), the application of the new methods is demonstrated for selected examples with real case-histories from civil engineering: reliability analysis of structures, soil and rock slopes, rock mass characterization, optimization of tunnel reinforcement and lining, evaluation of seismic vulnerability of buildings and damage scenarios in urban areas.
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/nut274tcy
or
http://uploading.com/files/385137d9/3642111890%252BBounding.zip/

[istigatore]

Jean-Paul Kurtz "Dictionary of Civil Engineering"
Springer | 2004-09-14 | ISBN: 0306483173 | 1516 pages | PDF | 55,3 MB | Cost: 168$ on Amazon\Ebay



This English version of the French publication, will be a valuable reference tool for civil engineers. There are over 12,000 definitions accompanied by more than 1,300 charts, tables, and graphs. This dictionary is a comprehensive compilation of definitions, examples and descriptions - from the study of soils, and the various materials and equipment used, including the most common architectural terms as they relate to civil engineering. The clear and concise presentation of this dictionary will easily clarify often confusing concepts and correct other lexicological errors. This compendium will be an invaluable tool not only for civil engineers, but also for lawyers, contractors, engineering and design departments, architects, etc. and all trade associations involved with this discipline. This dictionary may also be used as a valuable teaching tool.

....Torrent from ThePirateBay...

Прикрепленные файлы

 ThePirateBay_0306483173_Dictionary_of_Civil_Engineering.rar ( 41.4 килобайт ) Кол-во скачиваний: 60

 

[istigatore]

Engineering Geology for Underground Rocks
Springer; 1 edition | September 10, 2007 | ISBN: 3540732942 | 320 pages | PDF | 5.6 Mb



Engineering geology for underground rocks is a sub-discipline of engineering geology for describing and solving geological engineering problems encountered in underground mining, petroleum and civil engineering. It covers rock mechanics for underground rocks, rock hydraulics, wellbore mechanics, mine geology and mine hydrogeology.

This book clearly and systematically explains underground engineering geology principles, methods, theories and case studies, depicts engineering problems in underground rock engineering and how to study and solve them. It specially emphasizes mechanical and hydraulic couplings in rock engineering for wellbore stability, mining near aquifers and other underground structures where inflow is a problem. Using the methods and models given in this book, the reader is able to analyse underground geological engineering problems and also for the design of underground structures.

Professionals and students in engineering geology, geological, mining, petroleum, civil engineering, rock mechanics, and mine geology will find this an essential reference.
DDL RS

» Click to show Spoiler - click again to hide... «

http://rapidshare.com/files/251816210/Engineering_Geology_for_Underground_Rocks.rar

ICE Manual of Bridge Engineering 2nd Edition
Publisher: Institution of Civil Engineers | Pages: 704 | 2008-10-20 | ISBN 0727734520 | PDF | 11 MB



The fully revised, restructured and updated second edition of the "ICE Manual of Bridge Engineering" has been written and edited by a team of leading experts and presents valuable contributions from across the field within a single resource. The second edition comprehensively addresses key topic within bridge engineering, from history and aesthetics to design, construction and maintenance issues.This edition includes: Practical 'how to' approach; Significant new content added to build on bestselling first edition; and, Contributions from specialist authors with real world best-practice advice. "ICE Manual of Bridge Engineering, Second Edition" is the authoritative point of reference for practicing civil and structural engineers in consulting firms and government agencies, bridge contractors, research institutes, universities and colleges - in short, all practitioners involved in any aspect of the analysis, design, construction, repair, maintenance, and refurbishment of bridges. The ICE manuals series will offer civil engineers the quickest route to the information they need, ultimately providing core knowledge for the profession within a single highly referenced resource. ICE manuals will be available both in print and online and will deliver a comprehensive, authoritative and accessible package for all those working in civil engineering.
DDLS

» Click to show Spoiler - click again to hide... «

http://uploading.com/files/1mda48am/ICE_Manual_of_Bridge_Engineering_2nd_Ed.pdf/
or
http://hotfile.com/dl/15223846/5126ae9/ICE_Manual_of_Bridge_Engineering_2nd_Ed.pdf.html

[istigatore]

Ship-shaped Offshore Installations: Design, Building, and Operation
Publisher: Cambridge University Press | ISBN: 0521859212 | Authors: Jeom Kee Paik, Anil Kumar Thayamballi | Cost: 122$ On Amazon



Ship-shaped offshore units are some of the more economical systems for the development of offshore oil and gas, and are often preferred in marginal fields. These systems are especially attractive to develop oil and gas fields in deep and ultra-deep water areas and remote locations away from existing pipeline infrastructures. Recently, the ship-shaped offshore units have been applied to near shore oil and gas terminals. It is an ideal text and reference on the technologies for design, building and operation of ship-shaped offshore units, within inevitable space (and time) requirements. The book includes a range of topics, from the initial contracting strategy to decommissioning and the removal of the units concerned. Coverage includes both fundamental theory and principles of the individual technologies. This book will be useful to students who will be approaching the subject for the first time as well as designers working on the engineering for ship-shaped offshore installations.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/3gwpl3t1z31s/0521859212.rar.html
or
http://hotfile.com/dl/35258171/0e01728/0521859212.rar.html

[istigatore]

Environmental Control in Petroleum Engineering
Publisher: Gulf Professional Publishing | ISBN: 0884152731 | Authors: DR. John C. Reis Ph.D. | Cost: 123$ On Amazon



The petroleum industry must minimize the environmental impact of its various operations. This extensively researched book assembles a tremendous amount of practical information to help reduce and control the environmental consequences of producing and processing petroleum and natural gas. The best way to treat pollution is not to create it in the first place. This book shows you how to plan and manage production activities to minimize and even eliminate some environmental problems without severely disrupting operations. It focuses on ways to treat drilling and production wastes to reduce toxicity and/or volume before their ultimate disposal. You'll also find methods for safely transporting toxic materials from the upstream petroleum industry away from their release sites. For those sites already contaminated with petroleum wastes, this book reviews the remedial technologies available. Other topics include United States federal environmental regulations, sensitive habitats, major U.S. chemical waste exchanges, and offshore releases of oil. Environmental Control in Petroleum Engineering is essential for industry personnel with little or no training in environmental issues as well as petroleum engineering students.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/t6gh4id6ffz9/0884152731.rar.html
or
http://hotfile.com/dl/32262459/8e4087c/0884152731.rar.html
or
http://hotfile.com/dl/35283196/85b626b/0884152731.rar.html

[istigatore]

Engineered Rock Structures in Mining and Civil Construction
Publisher: Taylor & Francis | Pages: 536 | 01/01/2006 | ISBN 978-0-415-40013-8 | PDF | 180 MB



“ The book collates and sifts a vast amount of literature on the design of structures in the mining and construction industries to synthesize a comprehensive text on the subject area. The focus is on the application of theory to practice and the book is richly illustrated with worked out examples. The presentation is lucid and based on the extensive professional, teaching and research experience of the authors. The text seeks to address the key issues of design of 'engineered' structures in or on rock. The book will serve as a standard text for undergraduate courses in mining, civil engineering, engineering geology and rock mechanics. ”
DDL RS

» Click to show Spoiler - click again to hide... «

http://rapidshare.com/files/251773207/Engineered_Rock_Structures_in_Mining_and_Civil_Construction.part1.rar
http://rapidshare.com/files/251771860/Engineered_Rock_Structures_in_Mining_and_Civil_Construction.part2.rar
http://rapidshare.com/files/251771336/Engineered_Rock_Structures_in_Mining_and_Civil_Construction.part3.rar
http://rapidshare.com/files/251766887/Engineered_Rock_Structures_in_Mining_and_Civil_Construction.part4.rar

[istigatore]

T. H. G. Megson “Structural and Stress Analysis"
Butterworth-Heinemann | 2005-04-15 | ISBN: 0750662212 | 744 pages | PDF | 6,6 Mb



Structural analysis is the corner stone of civil engineering and all students must obtain a thorough understanding of the techniques available to analyse and predict stress in any structure.
The new edition of this popular textbook provides the student with a comprehensive introduction to all types of structural and stress analysis, starting from an explanation of the basic principles of statics, normal and shear force and bending moments and torsion. Building on the success of the first edition, new material on structural dynamics and finite element method has been included.
Virtually no prior knowledge of structures is assumed and students requiring an accessible and comprehensive insight into stress analysis will find no better book available.

* Comprehensive overview of structural and stress analysis
* Invaluable to undergraduate civil engineers
* Numerous worked examples and problems
* Solutions manual available online
DDLS

» Click to show Spoiler - click again to hide... «

http://uploading.com/files/6RE9P1Q2/Structural_and_Stress_Analysis.rar.html%20
or
http://depositfiles.com/files/7633500%20
or
http://www.megaupload.com/?d=9OEG3DB5%20

Tunelling and Tunnel Mechanics: A Rational Approach to Tunnelling, Dimitrios Kolymbas
Springer | English | ISBN 3540251960 | 431 pages | PDF | 10.57 MB | 2005



Tunnelling is an exciting and rapidly evolving technology. Pioneering processes are commonplace and innovative thinking continues to rewrite the rules. In civil engineering, tunnelling is one of the few areas where new horizons are constantly being discovered (ISBN-13: 9783540251965).

As rock mechanics is less developed and less known than soil mechanics, the principles of this young discipline are included in this book. I also attempted to integrate theoretical and practical viewpoints, since I consider both of them indispensable to engineering. The often encountered attitude of practitioners to blame theory (and vice versa) is regrettable. The theory addressed here refers to the mechanics of soil/rock behaviour and its interaction with the various support structures. Some chapters of the book aim at the description of planning and construction processes and, thus, need no reference to theory. Some other chapters contain both, practical and theoretical aspects.
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/ncgyltn9t
or
http://rapidshare.com/files/359686402/Tunnelling_and_Tunnel_Mechanics__2005_.pdf

[istigatore]

External Works, Roads and Drainage: A Practical Guide By Phil Pitman
Publisher Taylor & Francis | ISBN: 0419257608 | edition 2001 | PDF | 352 pages | 1,37 mb



Bridges the gap between theory and practice in building, construction, and civil engineering, providing practical guidance and the knowledge required "on the job." Comprehensive in scope, the book includes sections on legislation, environmental issues, surface water, highway and drainage design, road and pavement design, and external works. The book is well illustrated with flowcharts to guide the reader through the design process.
DDLS

» Click to show Spoiler - click again to hide... «

http://uploading.com/files/9F9W0ZBD/0419257608%201.zip.html
or
http://depositfiles.com/files/3golcfa1r

[istigatore]

Petroleum Geology of the South Caspian Basin
Publisher: Gulf Professional Publishing | ISBN: 0884153428 | Authors: L. Buryakovsky, Fred Aminzadeh, G.V. Chilingarian | Cost: 213$ On Amazon



In this information-packed volume, the authors present mathematical models and analyses for evaluating, assessing, and describing the petroleum geology of the oil-rich South Caspian Sea Basin, including eastern Azerbaijan and western Turkmenistan. Their mathematical models include descriptions of the development and structure of the surrounding geological systems and traps. Details the petrophysical properties and interrelationship with reservoir and source rocks Describes how new technology has made it possible to profitably produce off previously useless wells A valuable resource for exploration companies in the area of the South Caspian Basin
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/2cs3fe4xisqh/0884153428.rar.html
or
http://hotfile.com/dl/32262477/4739cb8/0884153428.rar.html
or
http://hotfile.com/dl/35283203/c2230cf/0884153428.rar.html

Sequence Stratigraphy on the Northwest European Margin (Norwegian Petroleum Society Special Publications)
Publisher: Elsevier Science | ISBN: 0444818634 | Cost: 275$ On Amazon



Sequence Stratigraphy, presently one of the most rapidly growing areas in geology, is concerned with the documentation and prediction of how sandstones (potential hydrocarbon reservoirs) and shales (potential source rocks) are distributed in time and space within sedimentary basins. The book takes a critical look at some of the sequence stratigraphy concepts, and provides an account of how these have been applied recently in NW Europe (North Sea, mid Norway and E. Greenland, Barents Sea and Svalbard), mainly in connection with the exploration for oil and gas. There is currently no similar book available.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/mh0xy6p3560s/0444818634.rar.html
or
http://hotfile.com/dl/30995622/8f03d93/0444818634.rar.html
or
http://hotfile.com/dl/35248480/1f0a289/0444818634.rar.html

[istigatore]

Seismic Amplitude Inversion in Reflection Tomography (Handbook of Geophysical Exploration: Seismic Exploration) (Vol 33)
Publisher: Pergamon | ISBN: 0080442439 | Authors: Y. Wang | Cost: 130$ On Amazon



This is the first book of its kind on seismic amplitude inversion in the context of reflection tomography. The aim of the monograph is to advocate the use of ray-amplitude data, separately or jointly with traveltime data, in reflection seismic tomography. The emphasis of seismic exploration is on imaging techniques, so that seismic section can be interpreted directly as a geological section. In contrast it is perhaps ironic that, in decades of industrial seismology, one major aspect of waveform data that potentially is easier to measure and analyse has generally been ignored. That is, the information content of seismic amplitudes. Perhaps the potential complexity has deterred most researchers from a more thorough investigation of the practical use of seismic amplitude data. The author of this volume presents an authoritative and detailed study of amplitude data, as used in conjunction with traveltime data, to provide better constraints on the variation of seismic wave speed in the subsurface. One of the fundamental problems in conventional reflection seismic tomography using only traveltime data is the possible ambiguity between the velocity variation and the reflector depth. The inclusion of amplitude data in the inversion may help to resolve this problem because the amplitudes and traveltimes are sensitive to different features of the subsurface model, and thereby provide more accurate information about the subsurface structure and the velocity distribution. An essential goal of this monograph is to make the amplitude inversion method work with real reflection seismic data.
DDLS

» Click to show Spoiler - click again to hide... «

http://www.filezlot.com/l720xnhwdeb1/0080442439.rar.html
or
http://hotfile.com/dl/30994920/1399c6c/0080442439.rar.html
or
http://hotfile.com/dl/35216004/09329b6/0080442439.rar.html

[istigatore]

Modeling and Simulation of Mineral Processing Systems
Publisher: Butterworth-Heinemann | ISBN: 0750648848 | Authors: R. Peter King | Cost: 130$ On Amazon



Dr. R. Peter King covers the field of quantitative modeling of mineral processing equipment and the use of these models to simulate the actual behavior of ore dressing and coal washing as they are configured to work in industrial practice. The material is presented in a pedagogical style that is particularly suitable for readers who wish to learn the wide variety of modeling methods that have evolved in this field. The models vary widely from one unit type to another. As a result each model is described in some detail. Wherever possible model structure is related to the underlying physical processes that govern the behaviour of particulate material in the processing equipment. Predictive models are emphasised throughout so that, when combined, they can be used to simulate the operation of complex mineral processing flowsheets. The development of successful simulation techniques is a major objective of the work that is covered in the text. * Covers all aspects of modeling and simulation * Provides all necessary tools to put teh theory into practice * Free CD ROM included
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/19138023/5ac6378/0750648848.rar.html
or
http://hotfile.com/dl/11138416/7d024f3/0750648848.rar.html

[istigatore]

Mechanical Engineers' Handbook(Vol I, II, III, IV) Third Edition
Wiley | 2005 | 3600 pages | English | ISBN-10 : 0471449903 | PDF | 72.9Mb



Mechanical Engineers' Handbook, Third Edition, provides a single source for all critical information needed by mechanical engineers in the diverse industries and job functions they find themselves. No single engineer can be a specialist in all areas that they are called on to work and the handbook provides a quick guide to specialized areas so that the engineer can know the basics and where to go for further reading.

* Book 1: Materials and Mechanical Design
* Book 2: Instrumentation, Systems, Controls, and MEMS
* Book 3: Manufacturing and Management
* Book 4: Energy and Power

Table Of Contents

VOLUME 1

PART 1. MATERIALS SELECTION
1. Carbon and Alloy Steels (Bruce L. Bramfitt)
2. Stainless Steel (James Kelly)
3. Aluminum Alloys (J.G. Kaufman)
4. Copper and Copper Alloys (Konrad J.A. Kundig)
5. Selection of Titanium Alloys for Design (Matthew Donachie)
6. Nickel and Its Alloys (T.H. Bassford, Jim Hosier and Gaylord Smith)
7. Magnesium and Its Alloys (Robert S. Busk and Robert E. Brown)
8. Selection of Superalloys for Design (Matthew J, Donachie and Stephen J.Donachie)
9. Plastics: Thermoplastics, Thermosets, and Elastomers (Edward N. Peters)
10. Composite Materials (Carl Zweben)
11. Smart Materials (James Harvey)
12. Overview of Ceramic Materials, Design, and Applications (R. Nathan Katz)
13. Sources of Materials Data (J.G. Kaufman)
14. Analytical Methods of Materials Selection (Dr. Mahmoud M. Farag)
PART 2. MECHANICAL DESIGN
15. Stress Analysis (Franklin E. Fisher)
16. An Introduction to the Finite Element Method (Tarek I. Zohdi)
17. Concurrent Engineering Technologies and Design for Six Sigma (James McMunigal and H. Barry Bebb)
18. TRIZ (James McMunigal)
19. Computer-Aided Design (Emory Zimmers, Jr.)
20. STEP (Martin Hardwick)
21. Virtual Reality-A New Technology for the Engineer (Ming C. Leu)
22. Physical Ergonomics (Maury A. Nussbaum and Jaap van Dieen)
23. Electronic Packaging (Warren C. Fackler)
24. Design Optimization-An Overview (A. Ravindran and G.V. Reklaitis)
25. Designing with Plastics (James Harvey)
26. Failure Considerations-Metals (Steve Daniewicz and Jack A. Collins)
27. Failure Analysis of Plastics (Vishu Shah)
28. Failure Modes: Performance and Service Requirements for Composites (Dietrich Munz)
29. Mechanical Reliability and Life Prediction for Brittle Materials (G.S.White, E.R. Fuller, Jr., and S.W. Freiman)
30. Total Quality Management in Mechanical Design (B.S. Dhillon)
31. Reliability in Mechanical Design (B.S. Dhillon)
32. Lubrication of Machine Elements (Bernard J. Hamrock)
33. Seal Technology (Bruce M. Steinetz)
34. Vibrations and Shock (Singiresu S. Rao)
35. Noise Measurements and Control (George M. Diehl)
36. Nondestructive Testing (Robert L. Crane and Jeremy Knopp)

VOLUME 2

PART 1. INSTRUMENTATION
1. Instrument Statics (Sriram Sundararajan, Jerry Lee Hall and Mahmood Naim)
2. Input and Output Characteristics (Adam C. Bell)
3. Bridge Transducers (Patrick L. Walter)
4. Measurements (E.L. Hixson and E. A. Ripperger)
5. Temperature and Flow Transducers (Robert J. Moffat)
6. Signal Processing (John Turnbull)
7. Data Acquisition and Display Systems (Philip C. Milliman)
8. Digital Integrated Circuits: A Practical Application (Todd Rhoad and Keith
Folken)

PART 2. SYSTEMS, CONTROLS, AND MEMS
9. Systems Engineering: Analysis, Design, and Information Processing for Analysis and Design (Andrew P. Sage)
10. Mathematical Models of Dynamic Physical Systems (K. Preston White, Jr.)
11. Basic Control Systems Design (William J. Palm)
12. Closed-Loop Control Systems Analysis (Suhada Jayasuriya)
13. Control System Performance Modification (Suhada Jayasuriya)
14. Servoactuators for Closed-Loop Control (Karl N. Reid and Syed Hamid)
15. Controller Design (T. Peter Neal)
16. General Purpose Control Devices (James H. Christensen, Robert J. Kretschmann and Muneshige Yamazaki)
17. State-Space Methods for Dynamic Systems Analysis (Krishnaswamy Srinivasan)
18. Control System Design Using State-Space Methods (Krishnaswamy Srinivasan)
19. Neural Networks in Control Systems (Frank Lewis and Shuzhi Sam Ge)
20. Mechatronics (Shane Farritor)
21. MEMS (Mona E. Zaghloul)

VOLUME 3

PART 1. MANUFACTURING
1. Product Design for Manufacturing and Assembly (DFM&A) (Gordon Lewis)
2. Achieving Enterprise Goals with New Process Technology(Steve W. Tuszynski)
3. Classification Systems (Dell K. Allen)
4. Production Planning (Bhaba R. Sarker, Dennis B. Webster and Thomas G. Ray)
5. Production Processes and Equipment (Magd E. Zohdi, Dennis B. Webster and William E. Biles)
6. Metal Forming, Shaping, and Casting (Magd E. Zohdi, Dennis B. Webster and William E. Biles)
7. Mechanical Fasteners (Murray J. Roblin and Anthony Luscher)
8. Statistical Quality Control (Magd E. Zohdi)
9. Computer-Integrated Manufacturing (William E. Biles and Magd E. Zohdi)
10. Material Handling (William E. Biles, Mickey Wilhelm, John S. Usher and Magd E. Zohdi)
11. Surface Coating Technology (Suzanne L. Rohde and Allan Matthews)
12. Environmentally Conscious Manufacturing (I. S. Jawahir and X. Wang)

PART 2. MANAGEMENT, FINANCE, QUALITY, LAW, AND RESEARCH
13. Managing Projects in Engineering Organization Using Inter-organizational Teams (Karen L. Higgins and Joseph A. Maciariello)
14. Managing People (Hans J. Thamhain)
15. Finance and the Engineering Function (William Brett)
16. Detailed Cost Estimating (Rod Stewart)
17. Investment Analysis (Byron W. Jones)
18. Total Quality Management and the Mechanical Engineer (R. Alan Kemerling and Jack B. ReVelle)
19. Registrations, Certifications, and Awards Jack B. ReVelle (Cynthia M.Sabelhaus)
20. Safety Engineering (Jack B. ReVelle)
21. What the Law Requires of the Engineer (Alvin S. Weinstein and Martin S.Chizek)
22. Patents (David A. Burge and Benjamin D. Burge)
23. Electronic Infrmation Resources: Your Online Survival Guide (Robert N.Schwarzwalder, Jr.)
24. Sources of Mechanical Engineering Information (Fritz Dusold and Myer Kutz)

VOLUME 4

1. Thermophysical Properties of Fluids (Peter E. Liley)
2. Fluid Mechanics (Reuben M. Olson)
3. Thermodynamics Fundamentals (Adrian Bejan)
4. Exergy Analysis and Entropy Generation Minimization (Adrian Bejan)
5. Heat Transfer Fundamentals (G.P. "Bud" Peterson)
6. Combustion (Eric Eddings)
7. Furnaces (Carroll Cone)
8. Gaseous Fuels (Richard J. Reed)
9. Liquid Fossil Fuels from Petroleum (Richard J. Reed)
10. Coals, Lignite, Peat (James Keppeler)
11. Solar Energy Applications (Jan F. Kreider)
12. Geothermal Resources and Technology: An Introduction (Peter D. Blair)
13. Energy Auditing (Carl Blumstein and Peter Kuhn)
14. Heat Exchangers, Vaporizers, Condensers (Joseph W. Palen)
15. Heat Pipes (Hongbin Ma)
16. Air Heating (Richard J. Reed)
17. Cooling Electronic Equipment (Allan Kraus, Avram Bar-Cohen and Abhay Watwe)
18. Fans, Blowers, Compressors, and Pumps (Keith Marchildon and Dave Mody)
19. Nuclear Power (William Kerr and William Updegrove)
20. Gas Turbines (Harold Miller and Todd Nemec)
21. Wind Turbines (Todd Nemec)
22. Steam Turbines (William G. Steltz)
23. Internal Combustion Engines (Ronald Douglas Matthews)
24. Refrigeration (Dennis L. O'Neal)
25. Cryogenic Systems (Leonard A. Wenzel)
26. Indoor Environmental Control (Jelena Srebric)
27. Air Pollution-Control Technologies (C.A. Miller)
28. Water Pollution-Control Technology (Carl A. Brunner and James F. Kreissl)
29. Fuel Cells (Matthew M. Mench)
30. Thermal Systems Optimization (Reinhard Radermacher)
31. Fluid Power (Andrew Alleyne)
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/42717958/ed668f4/Mechanical_Engineers_Handbook_Vol_I_II_III_IV.rar.html
or
http://sharingmatrix.com/file/4908290/Mechanical_Engineers_Handbook_Vol_I_II_III_IV.rar

Сообщение отредактировал istigatore - 14.05.2010 - 18:50

[istigatore]

Pavement Analysis and Design (2nd Edition)
Prentice Hall | 2003 | ISBN: 0131424734 | 792 pages | PDF | 180 MB



This up-to-date book covers both theoretical and practical aspects of pavement analysis and design. It includes some of the latest developments in the field, and some very useful computer software—developed by the author—with detailed instructions. Specific chapter topics include stresses and strains in flexible pavements, stresses and deflections in rigid pavements, traffic loading and volume, material characterization, drainage design, pavement performance, reliability, flexible pavement design, rigid pavement design, design of overlays, theory of viscoelasticity
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/43166027/0b9b48d/0131424734_Pavement.part1.rar.html
http://hotfile.com/dl/43166010/1add84e/0131424734_Pavement.part2.rar.html
or
http://rapidshare.com/files/387938074/0131424734_Pavement.part1.rar
http://rapidshare.com/files/387936490/0131424734_Pavement.part2.rar

[istigatore]

Petroleum Production Engineering, A Computer-Assisted Approach
Publisher: Gulf Professional Publishing | ISBN: 0750682701 | edition 2007 | PDF | 287 pages | 10 mb



Petroleum Production Engineering, A Computer-Assisted Approach provides handy guidelines to designing, analyzing and optimizing petroleum production systems. Broken into four parts, this book covers the full scope of petroleum production engineering, featuring stepwise calculations and computer-based spreadsheet programs. Part one contains discussions of petroleum production engineering fundamentals, empirical models for production decline analysis, and the performance of oil and natural gas wells.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/43223904/d123db9/4005.rar.html
or
http://rapidshare.com/files/388072408/4005.rar

[zanuda]

Отличная подборка литературы есть на сайте http://cmet4uk.ru/load/
Я там нашёл англо-русский разговорник с фразами и диалогами, аналогичный по внешнеэкономической деятельности у меня был с советских времён.
Там же куча типовых проектов.

[istigatore]

The Architect's Portable Handbook: First-Step Rules of Thumb for Building Design 4th Edit (McGraw-Hill Portable Handbook)
McGraw-Hill Professional | 2010-02-08 | ISBN: 0071639152 | 688 pages | PDF | 8 MB



The Essentials of Building Design--at Your Fingertips! Fully updated with the 2009 IBC International Building Code, this practical guide delivers the key data you need in every step of an architectural project--from initial planning and estimating through design and completion. The Architect's Portable Handbook, Fourth Edition, provides the latest code and cost information, along with a wealth of easy-to-follow diagrams, charts, tables, and checklists for building materials, components, and assemblies. This is a must-have on-the-job companion for every design professional

Get practical coverage of:

* Land planning
* Grading and drainage
* Soils
* Site improvements
* Landscaping and irrigation
* Green architecture
* Concrete
* Masonry
* Metals
* Wood
* Thermal and moisture protection
* Doors, windows, and glass
* Finishes
* Specialties
* Equipment
* Interiors
* Assemblies
* Conveying systems
* Plumbing and HVAC
* Lighting and electrical
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/44497963/9b67a24/0071639152.rar.html
or
http://uploading.com/files/25a51ecc/0071639152.rar/

[istigatore]

Seismic Data Analysis (2 Volumes)
Society Of Exploration Geophysicists | 2001-01-01 | ISBN: 1560800941 | Pages: 2027 | DJVU | 248 MB



Oz Yilmaz has expanded his original volume on processing to include inversion and interpretation of seismic data. In addition to the developments in all aspects of conventional processing, this two-volume set represents a comprehensive and complete coverage of the modern trends in the seismic industry-from time to depth, from 3-D to 4-D, from 4-D to 4-C, and from isotropy to anisotropy.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/45439414/3705509/Yilmaz.Seismic_Data_Analysis_Vol1.djvu.html
http://hotfile.com/dl/45439167/ce12c0f/Yilmaz.Seismic_Data_Analysis_Vol2.djvu.html
or
http://rapidshare.com/files/393002138/Yilmaz.Seismic_Data_Analysis_Vol1.djvu
http://rapidshare.com/files/393000124/Yilmaz.Seismic_Data_Analysis_Vol2.djvu

[istigatore]

Seismic Analysis of Structures
Wiley | 2010 | ISBN: 0470824611 | 464 pages | PDF | 6,4 MB



While numerous books have been written on earthquakes, earthquake resistance design, and seismic analysis and design of structures, none have been tailored for advanced students and practitioners, and those who would like to have most of the important aspects of seismic analysis in one place. With this book, readers will gain proficiencies in the following: fundamentals of seismology that all structural engineers must know
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/43843849/d80d583/0470824611_Seismic.rar.html
or
http://rapidshare.com/files/389612416/0470824611_Seismic.rar

[istigatore]

Reinforced Concrete Design of Tall Buildings
CRC Press | 2009 | ISBN: 143980480X | 1024 pages | PDF | 31,5 MB



The latest building codes, including ASCE/SEI 7-05, IBC-06/09, ACI 318-05/08, and ASCE/SEI 41-06 Recent developments in studies of seismic vulnerability and retrofit design Earthquake hazard mitigation technology, including seismic base isolation, passive energy dissipation, and damping systems Lateral bracing concepts and gravity-resisting systems Performance based design trends Dynamic response spectrum and equivalent lateral load procedures
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/41597795/101afe6/143980480X_Buildings.rar.html
or
http://rapidshare.com/files/384288098/143980480X_Buildings.rar

Examples for the Design of Structural Concrete With Strut-And-Tie Models
Publisher: Amer Concrete Inst | ISBN: 0870310860 | edition 2002 | PDF | 250 pages | 18,1 mb



Examples for the Design of Structural Concrete With Strut-And-Tie Models by Amer Concrete Inst
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/46422162/313ebc5/4320.rar.html
or
http://depositfiles.com/files/a9ek4azkg
or
http://sharingmatrix.com/file/6903659/4320.rar

Сообщение отредактировал istigatore - 4.06.2010 - 17:50

[istigatore]

Buildings for the Performing Arts, Second Edition
Publisher: Architectural Press | ISBN: 0750668350 | edition 2008 | PDF | 296 pages | 15 mb



This superb design and development guide must be essential reading for all design teams involved in the initiation, planning, design and building of facilities for the various performing arts. A detailed analysis of all design and development issues and the relationships with clients and consultants are explored adopting a very discerning approach. The specific studies that follow analyse in a masterly way the critical requirements of the auditorium and platform/stage, support facilities and their relationship, and examine the effects of site conditions, their time scale and financial appraisal.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/30712724/1cd2c89/Buildings_for_the_Performing_Arts.zip.html
or
http://rapidshare.com/files/357477712/Buildings_for_the_Performing_Arts.zip

[istigatore]

Prandtl-Essentials of Fluid Mechanics
Springer | 2009 | ISBN: 144191563X | 796 pages | PDF | 26,1 MB



This book is an update and extension of the classic textbook by Ludwig Prandtl, Essentials of Fluid Mechanics. It is based on the 12th German edition with additional material included. Chapters on wing aerodynamics, heat transfer, and layered flows have been revised and extended, and there are new chapters on fluid mechanical instabilities and biomedical fluid mechanics.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/49234788/c81d782/144191563XPrandtl.rar.html
or
http://rapidshare.com/files/400381739/144191563XPrandtl.rar

Engineering Fluid Mechanics
Publisher: Wiley | ISBN: 0470259779 | edition 2008 | PDF | 592 pages | 47,6 mb



Connecting the math and theory of fluid mechanics to practical applications can be a difficult process. Engineering Fluid Mechanics builds on the success of previous editions to help engineers learn how to apply concepts by keeping them engaged and active throughout the book. Simple and effective examples show how key equations are utilized in practice, and step-by-step descriptions provide details into the processes that engineers follow. Each chapter also outlines the three most important things they will be able to accomplish once the concepts are learned. With its physical/visual approach, engineers will quickly gain an intuitive understanding of the principles.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/30979855/1859387/engineeringmechanics.pdf.html

Fluid Mechanics for Petroleum Engineers
Elsevier Science | English | 1993-03-01 | ISBN: 0444986685 | 412 pages | PDF | 12 MB



Hardbound. Written primarily to provide petroleum engineers with a systematic analytical approach to the solution of fluid flow problems, this book will nevertheless be of interest to geologists, hydrologists, mining-, mechanical-, or civil engineers. It provides the knowledge necessary for petroleum engineers to develop design methods for drilling, production, transport of oil and gas. Basic mechanical laws are applied for perfect fluid flow, Newtonian fluid, non-Newtonian fluid, and multiple phase flows. Elements of gas dynamics, a non-familiar treatment of shock waves, boundary layer theory, and two-phase flow are also included.

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/f2lp8n4ge

Fundamentals of Fluid Mechanics and Transport Phenomena
Wiley-ISTE | 2009 | ISBN: 1848210655 | 512 pages | PDF | 13 MB



This book examines the phenomena of fluid flow and transfer as governed by mechanics and thermodynamics. Part 1 concentrates on equations coming from balance laws and also discusses transportation phenomena and propagation of shock waves. Part 2 explains the basic methods of metrology, signal processing, and system modeling, using a selection of examples of fluid and thermal mechanics.

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/rekt7cok7
or
http://hotfile.com/dl/40742935/c379104/1848210655.rar.html

Сообщение отредактировал istigatore - 18.06.2010 - 21:31

[istigatore]

Rock Quality, Seismic Velocity, Attenuation and Anisotropy
Published by Taylor & Francis | Publication date : October 2006 | ISBN : 0415394414 | PDF | 756 pages | English | 27 MB



Seismic measurements take many forms, and have a universal role in the earth sciences. There are huge rewards to be gained from ‘seeing’ below the earth’s surface. This unique book describes seismic behaviour at many scales, and provides the appropriate interpretation in terms of rock mechanics.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/49271735/62b0ad2/Rock_Quality__Seismic_Velocity__Attenuation_and_Anisotropy.rar.html
or
http://rapidshare.com/files/400102739/Rock_Quality__Seismic_Velocity__Attenuation_and_Anisotropy.rar.html

[istigatore]

Bridge Launching
Publisher: Thomas Telford Ltd | 2002-11-15 | ISBN: 0727731467 | PDF | 352 pages | 101.39 MB



This book is devoted to bridges that are built by incremental launching methods, using prestressed composite materials. It integrates the static, aesthetic, and economic aspects of construction techniques for building these state-of-the-art structures. Bridge launching is a comprehensive handbook, offering explanations of both the theoretical and technological aspects of the construction process. Both beam bridges and arch bridges are thoroughly analysed,and special theories aimed at optimising static aspects, as well as local phenomena
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/49536789/42fd680/098.zip.html
or
http://rapidshare.com/files/400937589/098.zip

[istigatore]

Stainless Steels for Design Engineers
ASM International | 2008 | ISBN: 0871707179 | 225 pages | PDF | 15 MB



This book contains everything engineers and designers need to make sound technical judgments about which stainless steels to use and how to use them. Extensive composition and property information on all five families of stainless steel, including newest alloys is included. Coverage addresses selection for corrosion resistance, processing, and major applications, FREE access to Thermo-Calc software for 3 element phase diagram simulation.
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/sgf0arsd7
or
http://hotfile.com/dl/50797682/353a337/0871707179.rar.html

[istigatore]

Wiley Critical Content: Petroleum Technology
Wiley-Interscience | 2007-03-23 | ISBN: 047013402X | 2209 pages | PDF | 28 MB



The two-volume reference Wiley Critical Content: Petroleum Technology presents a collection of over 40 articles that were reprinted from the Kirk-Othmer Encyclopedia of Chemical Technology and Ullmann's Encyclopedia of Industrial Chemistry. The articles are organized in three thematic subjects:
PART I: Exploration, Refining, Engineering, and Handling
PART II: Fuels
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/yevk0bvvu
or
http://hotfile.com/dl/51182411/2c44624/047013402X.rar.html

Working Guide to Petroleum and Natural Gas Production Engineering
Gulf Professional Publishing | 2009 | ISBN: 1856178455 | 352 pages | PDF | 14 MB



Based on the classic Standard Handbook of Petroleum and Natural Gas Engineering, Second Edition, the Working Guide to Petroleum and Natural Gas Production Engineering begins with an extensive overview of the basic principles, definitions, and data. Later chapters cover properties of hydrocarbon mixtures, flow natural flow of fluids, natural flow performance, artificial lift methods and corrosion and scaling. This book provides engineers with a bases for understanding important concepts such a flow phenomena, hydrate formation, pressure (surge) waves, or high viscosity liquid flow failure. The focus of book is to assist the reader to understand and avoid potential operational challenges and design effective solutions and operational responses.

Evaluate well inflow performance
Guide to properties of hydrocarbon mixtures
Evaluate Gas production and processing facilities
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/u2du4ffho
or
http://hotfile.com/dl/51019909/69cefeb/1856178455.rar.html

PEH Vol. 4 Production Operations Engineering
Society of Petroleum Engineers | English | 2007-01-01 | ISBN: 1555631185 | 908 pages | PDF | 42 MB



Production Operations Engineering, Vol. IV of the new Petroleum Engineering Handbook, is designed to replace the production engineering chapters found in the 1987 edition of the Handbook. There have been significant changes in technology and operating practices in the past 20 years, and these new chapters will bring you up to date in the areas of design, equipment selection, and operation procedures for most oil and gas wells.

The 16 chapters in this volume are divided into three groups.
The first section, on well completions, includes discussions of inflow and outflow performance; completion systems; tubing selection, design, and installation; perforating; and sand control. The next group of chapters deals with the problems caused by formation damage; topics include formation damage, matrix stimulation, hydraulic fracturing, and well production problems. The final chapters address the subject of artificial lift, a major concern for production engineers. Subjects mentioned include artificial lift selection, sucker-rod lift, gas lift, electrical submersible pumps, hydraulic pumping in oil wells, progressing cavity pumping systems, and plunger lift.

TOC
1 Infl ow and Outfl ow Performance - Michael L. Wiggins
2 Completion Systems - David Ruddock
3 Tubing Selection, Design, and Installation - Joe Dunn Clegg and Erich F. Klementich
4 Perforating - George E. King
5 Sand Control - W.L. Penberthy, Jr.
6 Formation Damage - Mukul M. Sharma
7 Matrix Acidizing - Harry O. McLeod
8 Hydraulic Fracturing - Stephen A. Holditch
9 Well Production Problems - Raymond Jasinski
10 Artifi cial Lift Systems - James F. Lea
11 Sucker-Rod Lift - Norman W. Hein, Jr.
12 Gas Lift - Herald W. Winkler and Jack R. Blann
13 Electrical Submersible Pumps - John Bearden
14 Hydraulic Pumping in Oil Wells - James Fretwell
15 Progressing Cavity Pumping Systems - Cam M. Matthews, Todd A. Zahacy, Francisco J.S. Alhanati, Paul Skoczylas, and Lonnie J. Dunn
16 Plunger Lift - Scott D. Listiak and Daniel H. Phillips
Author Index
Subject Index
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/lnfx0o3g9
or
http://www.megaupload.com/?d=M1D0QQIG

Сообщение отредактировал istigatore - 28.06.2010 - 18:15

[istigatore]

Handbook of Geotechnical Engineering Practice
Wiley-VCH | ISBN: 3433014493 | June 15, 2002 | Djvu | 650 pages | 23 MB

Volume 1 covers the basics necessary for any construction activity in foundation engineering. This systematic introduction to the assessment of soil and rock properties provides an insight into the requirements of Eurocode 7, Parts 1 and 3. It also gives details of geotechnical laboratory and field tests and the associated equipment, concise treatments of relevant solutions provided by the theories of elasticity and plasticity and numerical methods applied to solve problems of geotechnical design. The problems of earthquakes are also explained with regard to Eurocode 8.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/18594374/42d8378/Geoeng.rar.html
or
http://www.megaupload.com/?d=WNAHIHJ0

Geotechnical Investigation Methods: A Field Guide for Geotechnical Engineers
CRC Press, Taylor & Francis Group, LLC | 2007 | ISBN: 1420042742 | 342 pages | PDF | 11 Mb

The investigation phase is the most important segment of any geotechnical study. Using the correct methods and properly interpreting the results are critical to a successful investigation. Comprising chapters from the second edition of the revered Geotechnical Engineering Investigation Handbook, Geotechnical Investigation Methods offers clear, concise, and hands-on guidance for choosing and executing a variety of field investigations.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/31788885/b0ed9cf/GeotechInvMeth.rar.html
or
http://rapidshare.com/files/360352438/GeotechInvMeth.rar

[istigatore]

Michael W. Lucas, "Network Flow Analysis"
No Starch Press | 2010 | ISBN: 1593272030 | 224 pages | PDF | 1,8 MB



You know that servers have log files and performance measuring tools and that traditional network devices have LEDs that blink when a port does something. You may have tools that tell you how busy an interface is, but mostly a network device is a black box. Network Flow Analysis opens that black box, demonstrating how to use industry-standard software and your existing hardware to assess, analyze, and debug your network.

Unlike packet sniffers that require you to reproduce network problems in order to analyze them, flow analysis lets you turn back time as you analyze your network. You'll learn how to use open source software to build a flow-based network awareness system and how to use network analysis and auditing to address problems and improve network reliability. You'll also learn how to use a flow analysis system; collect flow records; view, filter, and report flows; present flow records graphically; and use flow records to proactively improve your network. Network Flow Analysis will show you how to:

* Identify network, server, router, and firewall problems before they become critical
* Find defective and misconfigured software
* Quickly find virus-spewing machines, even if they're on a different continent
* Determine whether your problem stems from the network or a server
* Automatically graph the most useful data

And much more. Stop asking your users to reproduce problems. Network Flow Analysis gives you the tools and real-world examples you need to effectively analyze your network flow data. Now you can determine what the network problem is long before your customers report it, and you can make that silly phone stop ringing.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/51742165/28589bd/1593272030Network.rar.html
Mirror
http://www.fileserve.com/file/D2Mmmd8/1593272030Network.rar

[istigatore]

Engineering Mechanics: Dynamics (12th Edition)
Prentice Hall | 2009 | ISBN: 0136077919 | 752 pages | PDF | 73 Mb



In his substantial revision of Engineering Mechanics, R.C. Hibbeler empowers students to succeed in the whole learning experience. Hibbeler achieves this by calling on his everyday classroom experience and his knowledge of how students learn inside and outside of lecture. In addition to over 50% new homework problems, the twelfth edition introduces the new elements of Conceptual Problems, Fundamental Problems and Mastering Engineering, the most technologically advanced online tutorial and homework system.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/54105128/4c288c5/Engineering_dynamic.rar.html
or
http://depositfiles.com/files/nl3xjljjy

[istigatore]

Magnus Wangen, "Physical Principles of Sedimentary Basin Analysis"
Cambridge University Press | 2010 | ISBN: 0521761255 | 544 pages | PDF | 5,6 MB



Presenting a rigorous treatment of the physical and mechanical basis for the modelling of sedimentary basins, this book supplies geoscientists with practical tools for creating their own models. It begins with a thorough grounding in properties of porous media, linear elasticity, continuum mechanics and rock compressibility. Chapters on heat flow, subsidence, rheology, flexure and gravity consider sedimentary basins in the context of the Earth's lithosphere, and the book concludes with coverage of pore space cementation, compaction and fluid flow
. The volume introduces basic, state-of-the-art models and demonstrates how to reproduce results using tools like MATLAB and Octave. Main equations are derived from first principles, and their basic solutions obtained and then applied. Separate notes sections supply more technical details, and the text is illustrated throughout with real-world examples, applications and test exercises. This is an accessible introduction to quantitative modelling of basins for graduate students, researchers and oil industry professionals.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/54592360/448efeb/0521761255SedimentaryAnalysis.rar.html
or
http://www.fileserve.com/file/HJTFeyr

Сообщение отредактировал istigatore - 21.07.2010 - 20:54

[istigatore]

Fossil Fuel-Fired Power Generation: Case studies of recently constructed coal- and gas-fired power plants
Oecd publishing | 2007 | 176 pages | ISBN:9264039082 | PDF | 6.5 Mb



To meet future energy demand growth and replace older or inefficient units, a large number of fossil fuel-fired plants will need to bebuilt worldwide in the next decade. Yet CO2 emissions from fossil-fired power generation are a major contributor to climate change. As a result, new plants must be designed and operated at highest efficiency. The case studies in this report respond to a request to the IEA from the G8 Summit in July 2005 to illustrate the degree of efficiency now achieved in modern plants in different parts of the world using various grades of fossil fuels. The plants were selected from different geographical areas, because local factors influence attainable efficiency.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/55000876/e6580c4/9264039082.rar.html
or
http://www.fileserve.com/file/jucUf6m

[istigatore]

Pipeline Rules of Thumb Handbook, Seventh Edition: A Manual of Quick, Accurate Solutions to Everyday Pipeline Engineering Problems
2009 | 800 pages | ISBN:1856175006 | PDF | 13 Mb



This classic reference has built a reputation as the "go to" book to solve even the most vexing pipeline problems. Now in its seventh edition, Pipeline Rules of Thumb Handbook continues to set the standard by which all others are judged. The 7th edition features over 30% new and updated sections, reflecting the exponential changes in the codes, construction and equipment since the sixth edition. The seventh edition includes: recommended drill sizes for self-tapping screws, new ASTM standard reinforcing bars, calculations for calculating grounding resistance, national Electrical Code tables, Corilis meters, pump seals, progressive cavity pumps and accumulators for lubricating systems.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/55596217/8da5573/Pipeline_Rules_of_Thumb_Handbook___Seventh_Edition.rar.html
or
http://www.fileserve.com/file/yE3HH4M

[istigatore]

Steels: Processing, Structure, And Performance
2005 | 613 pages | ISBN:0871708175 | PDF | 15 Mb



This volume is an essential reference for anyone who makes, uses, studies, or designs with steel. The interrelationships between chemistry, processing, structure, and performance--the elements of physical metallurgy--are integrated for all the types of steel discussed. The evolution, characterization, and performance of steel microstructures are described, with increased emphasis on deformation and fracture.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/56598461/62a2a06/0871708175.rar.html
or
http://www.fileserve.com/file/hwzS3nm

[istigatore]

Steel Bridge Construction, Myths & Realities
2007 | 452 pages | ISBN:1456256324 | PDF | 6.8 Mb



This booklet is an updated and expanded version of the original document published in the mid-90s. Its purpose is to dispel some of the ”myths” or misconceptions surrounding the use of steel in bridge construction. These myths often arise out of past experience and don’t take into account changes in technology, improvements in materials and products or updated design and construction practices.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/57021082/87ffaa4/Steel_Bridge_Construction__Myths___Realities_D432-07_R20090210A.rar.html
or
http://www.fileserve.com/file/rsey4XS

Сообщение отредактировал istigatore - 23.07.2010 - 20:06

[istigatore]

Tarek Ahmed - Reservoir Engineering Handbook [Fourth Edition]
Elsevier, Gulf Professional Publishing | 2010 | ISBN: 185617803X | 1463 pages | PDF | 16 MB



This book explains the fundamentals of reservoir engineering and their practical application in conducting a comprehensive field study.
Chapter 1 reviews fundamentals of reservoir fluid behavior with an emphasis on the classification of reservoir and reservoir fluids.
Chapter 2 documents reservoir-fluid properties, while Chapter 3 presents a comprehensive treatment and description of the routine and specialized PVT laboratory tests.
The fundamentals of rock properties are discussed in Chapter 4 and numerous methodologies for generating those properties are reviewed.
Chapter 5 focuses on presenting the concept of relative permeability and its applications in fluid flow calculations.
The fundamental mathematical expressions that are used to describe the reservoir fluid flow behavior in porous media are discussed in Chapter 6, while Chapters 7 and 8 describe the principle of oil and gas well performance calculations, respectively.
Chapter 9 provides the theoretical analysis of coning and outlines many of the practical solutions for calculating water and gas coning behavior.
Various water influx calculation models are shown in Chapter 10, along with detailed descriptions of the computational steps involved in applying these models.
The objective of Chapter 11 is to introduce the basic principle of oil recovery mechanisms and to present the generalized form of the material balance equation.
Chapters 12 and 13 focus on illustrating the practical applications of the material balance equation in oil and gas reservoirs.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/57422471/e5eb559/ResEngHB10.rar.html
or
http://freakshare.net/files/ykcym68w/ResEngHB10.rar.html

Highway Engineering Handbook third Edition
2009 | 885 pages | ISBN:0071597638 | PDF | 8 Mb



This trusted resource has been thoroughly updated to reflect the latest codes, standards, and policies of the American Association of State Highway and Transportation Officials (AASHTO), as well as new engineering developments. Filled with photos, illustrations, schematics, tables, and design equations, this authoritative reference is essential for anyone involved in or studying highway engineering.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/57680352/1e84917/0071597638_Highway_Engineer.rar.html
or
http://www.fileserve.com/file/9YqFayB

Сообщение отредактировал istigatore - 28.07.2010 - 20:04

[istigatore]

Limit States Design of Structural Steelwork
2007 | 274 pages | ISBN:0412397005 | PDF | 6 Mb



The text introduces the basic properties of steel, types of steel structure and steelwork design in order to develop an understanding of the various aspects of the behavior and design of structural steelwork. This edition has been thoroughly revised in accordance with the 2000 amendment to Part 1 of BS 5950 - all references have been updated and a new section on partial encasement for fire resistance has been added. Each chapter features worked examples, practice problems and references.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/58088662/62a3d35/Limit_State_Design_of_Structural_Steelwork.pdf.html
or
http://www.fileserve.com/file/fVvnNE6

Pile Design for Structural and Geotechnical Engineers
2008 | 416 pages | ISBN:0750687630 | PDF | 6.2 Mb



This book enables the reader to come away with a complete and comprehensive understanding of the issues related to the design, installation and construction of piles.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/58080567/ce8499b/0750687630.rar.html
or
http://www.fileserve.com/file/2A5rYq6

[istigatore]

Process Piping: The Complete Guide to Asme B31.3
2007 | 269 pages | ISBN:0791801772 | PDF | 8 Mb



This essential new volume provides background information, historical perspective, and expert commentary on the ASME B31.3 Code requirements for process piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of process piping. The author is a long-serving member of the ASME B31.3, Process Piping Code committee. Dr. Becht explains the principal intentions of the Code

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/62065644/4c3e2ba/ProcPipinGuid.rar.html
ot
http://www.fileserve.com/file/m3wdYzE