Полная версия этой страницы:
Cadaplus APLUS v23.111
enskiy
23.03.2012 - 18:11
Version: 12.034
Date Added: 21/03/2012
_http://arch.pollub.pl/files/aplus.exe
Патчер работает
По ссылке грузиться
Version: 12.063
Date Added: 14/06/2012
tanbqtb03
6.12.2012 - 05:44
QUOTE (enskiy @ 23.03.2012 - 18:11)
Version: 12.034
Date Added: 21/03/2012
_http://arch.pollub.pl/files/aplus.exe
Патчер работает
По ссылке грузиться
Version: 12.063
Date Added: 14/06/2012
Thank you very much, good soft
netsonicyxf
18.03.2013 - 05:34
Цитата(nAlex @ 10.12.2011 - 15:07)
Патчер для APlus. Скопировать в папку с aplus.vlx, запустить и нажать «Patch».
Должно работать, по идее, для любой версии, пока что-то в защите не изменится.
Для работы необходимо наличие .NET Framework 2.0.
APlus patcher.Copy to the directory containing aplus.vlx, run and press the «Patch» button.
Should work for any version until protection algorithm is modified.
Requires .NET Framework 2.0 to work.
Нажмите для просмотра прикрепленного файла The patcher doesn't work for the
v13 version, althourh it says it patched file.
Цитата
File «aplus.vlx» is found.
Press «Patch» to begin.
--------------------
File read OK.
Pattern 1 read OK.
Pattern 1_2 seek error!
Pattern 2 read OK
Pattern 2 applied.
Pattern 1 applied.
--------------------
Backup file created successfully.
--------------------
File successfully patched!
Slinger
18.03.2013 - 12:11
Works fine for me with 13.014 version
Цитата(Slinger @ 18.03.2013 - 12:11)
Works fine for me with 13.014 version
http://www.cadaplus.com/downloads.php?lang=ru
Новая версия 13.041
istigatore
8.07.2013 - 17:51
Приватный текст
ЗарегистрироватьсяНаписать 5 сообщений (5 осталось)
patcher works OK with 13.093
Yap_yx
12.05.2014 - 18:53
Patcher stop working for 14.045 , any ideas ?
kostell
7.01.2015 - 00:12
Приватный текст
ЗарегистрироватьсяНаписать 5 сообщений (5 осталось)
Slinger
21.01.2015 - 00:18
Version 15.013 (build january, 19) works fine with Map 3D 2015.
Please,
link for valid v.15 installer !
Thanks!
QUOTE (nAlex @ 10.12.2011 - 14:07)
Патчер для APlus. Скопировать в папку с aplus.vlx, запустить и нажать «Patch».
Должно работать, по идее, для любой версии, пока что-то в защите не изменится.
Для работы необходимо наличие .NET Framework 2.0.
APlus patcher.Copy to the directory containing aplus.vlx, run and press the «Patch» button.
Should work for any version until protection algorithm is modified.
Requires .NET Framework 2.0 to work.
Нажмите для просмотра прикрепленного файла Work Great with APlus v.14.091 (down from here - http://www.softpedia.com/get/Science-CAD/APlus.shtml).
Version 14.105 from here - http://download.cnet.com/windows/cadaplus/3260-20_4-6314570-1.html - not working, installation error.
Thanks a lot.
Regards,
CretuA
cadcamcae
25.02.2015 - 11:59
cretu, take it from post #60.
Помогите пожалуйста с установкой APLUS. Скачал trial aplus.exe (50,7 МБ (53 236 918 байт)), установил, применил APlusPatcher.exe, при запуске Autocad 2015 сообщение
APLUS v15.063 registered to: Jedrzej Cytawa -------------------
Reloading APLUS menu...
; error: bad argument type: stringp nil
Как можно решить эту проблему (ОС W8.1 x64 Autocad 2015)?
Миша_Киборг
5.10.2015 - 17:56
вышла обновленная версия 15.095 или типа того...там новую броню накатили...APlusPatcherом не берется
Цитата(Миша_Киборг @ 5.10.2015 - 18:56)
вышла обновленная версия 15.095 или типа того...там новую броню накатили...APlusPatcherом не берется
I must confirm that patcher not work with version 15.095
mragtronx8
8.10.2015 - 15:31
please provide aplus 15.102 crack / patch
mragtronx8
14.12.2015 - 17:37
dear friends;
please provide aplus 15.124 crack / patch
thx in advance
Can anyone please fix the patch file when have free time, it's not working for the newer version.
Thanks
loshlosh
11.01.2016 - 00:32
PlPlease aplus v16.016 patch, the current patch does not work
Просьба выложить patch для версии aplus v16.016. Заранее спасибо.
I will work on it in free time.
Thanks
Very interested in whether there is news about medicine?
miguel2019
16.09.2016 - 02:06
Anyone have the program for civil 3d 2014. Please.
loshlosh
13.02.2017 - 03:32
Hello
News for aplus v16
istigatore
14.02.2017 - 18:10
Приватный текст
ЗарегистрироватьсяНаписать 5 сообщений (5 осталось)
ing.kan
15.02.2017 - 08:43
hy can you please post lastes working instalation and patch:)
Friends,
Finally I have manged to get some time to work on it. Here is the medicine for APLUS.
Tested in AutoCAD Mechanical 2015.
Steps to follow:
1. Install APLUS and Open AutoCAD.
2. Download APLKEY.rar and extract.
3. Load APLKEY.VLX file and Run the Command APLKEY. (Note Internet connection require)
4. Copy the Bytes which is pasted in commandline.
5. Close AutoCAD.
6. Delete the XXXXX_Trial.lic file. (Optional)
7. Open the aplus.vlx file in HEX Editor.
8. Search for the Sequence of bytes 00 D9 79 46 and replace to the Bytes copied from commandline (see instruction no. 3).
9. Search for the sequence of bytes 17 7C 22 7C 27 4D 78 2B 2A 5E 1F 07 82 F5 48 41 0F & Replace it to 13 7C 22 7F 6C 68 2D 7F 0D 11 3D 01 D4 CD 44 4E 0A
10. Save the edited Aplus.vlx file and replace it in the APLUS directory.
11. Restart AutoCAD.
12. If not working, Type APPLOAD go to "Contents" under Startup Suite and remove aplus.vlx and then re-add the aplus.vlx (edited one).
13. Restart AutoCAD again.
14. Any error please report.
15. Start Learning APLUS.
Special Thanks to
Slinger for helping personally.
Нажмите для просмотра прикрепленного файла
Slinger
24.02.2017 - 13:25
Posted method works fine with 17.013. With upper and lower versions is not working.
Here is a link to 17.013:
https://mega.nz/#!ElQG2LTB!FVN2FrrjtVpHuuuENAftokYPPfmIsqf9bssDgEkFqKA
Probably try this. Not tested.
For Version 17.024
Few instructions changes. Rest are same
2. Download APLKEY 17.024.rar and extract.
8. Search for the Sequence of bytes 15 85 60 0E and replace to the Bytes copied from commandline (see instruction no. 3).
9. Search for the sequence of bytes 0D 6F 73 2A 34 15 64 27 53 62 65 05 11 92 92 8C 5F & Replace it to 09 6F 73 29 7F 30 31 73 74 2D 47 03 47 AA 9E 83 5A
I doubt there could be License upgrade error if you already licensed the previous version.
Please check and report
Нажмите для просмотра прикрепленного файла
Ok So the user from the list I have selected to replace with our info has his license upto 20140930 or something. Even after you apply the 17.024 medicine it will not work because the license is expired.
We have to do one more step to change the date to 21000101.
I will do this on monday and will post.
Thanks
istigatore
27.02.2017 - 18:55
Приватный текст
ЗарегистрироватьсяНаписать 5 сообщений (5 осталось)
Thanks Istigatore for your compliments. I have also made the working version of 17.024 the Latest version but need time to write explaination post. Soon I will do that.
Thanks
loshlosh
1.03.2017 - 05:55
OK
So here is the Medicine for APLUS 17.024.
Tested in AutoCAD Mechanical 2015.
Steps to follow:
1. Install APLUS and Open AutoCAD.
2. Download APLKEY 17.024.rar and extract.
3. Load APLKEY 17.024.VLX file and Run the Command APLKEY. (Note Internet connection require)
4. Copy the Bytes which is pasted in commandline.
5. Close AutoCAD.
6. Delete the XXXXX_Trial.lic file. (Optional)
7. Open the aplus.vlx file in HEX Editor.
8. Search for the Sequence of bytes 51 0D D6 43 and replace to the Bytes copied from commandline (see instruction no. 4).
9. Search for the sequence of bytes 26 3E 87 52 34 69 32 14 7F 31 6B 7E 6B 6E 71 03 5A & Replace it to 3F 37 94 5F 36 74 32 33 7B 63 5D 66 6D 79 6E 03 5C
10. Save the edited Aplus.vlx file and replace it in the APLUS directory.
11. Restart AutoCAD.
12. If not working, Type APPLOAD go to "Contents" under Startup Suite and remove aplus.vlx and then re-add the aplus.vlx (edited one).
13. Restart AutoCAD again.
PS: To download latest version go here: hxxp://www.cadaplus.com/files/aplus.exeThanks
Нажмите для просмотра прикрепленного файла
A big THANK-YOU to great LAVTeam !
Приватный текст
ЗарегистрироватьсяНаписать 5 сообщений (5 осталось)
QUOTE (2ak2 @ 2.03.2017 - 01:00)
<!--private_data=0-->
2ak2,
I understand your concern but the Internet connection requires only to get the server time which is necessary to calculate the KEY.
Even if you do not apply medicine you will have to have a connection to get the server time (this is to check the remaining trial days).
Thanks
PS: Once the Step 3 is done, Internet has nothing to do ahead (Have it or Disconnect).
Tested APLUS 17.024 in AutoCAD 2017.
Command: APLKEY
; error: no function definition: A+APLUSINIT
the current patch APLKEY 17.024.VLX does not work …
Williams
5.03.2017 - 14:44
Cadaplus APLUS v17.024APLUS - это надстройка для Autodesk AutoCAD, повышающая функциональность путем добавления новых команд для ускориния разработки проекта. APLUS состоит из 2-х частей: команды для AutoCAD (APLUS) и набор блоков (BIINDEX).
О нововведения можно почитать тут: http://www.cadaplus.com/features.php?lang=en
Обучающее видео тут: http://www.cadaplus.com/tutorials.php?lang=en
и здесь: http://www.cadaplus.com/videos.php?lang=en
+ = link.
48 Mb (RAR5, incl. 3% - info for restoration purpose)
Help me. That this?
Команда: _appload APLKEY 17.024.VLX успешно загружено.
Команда:
Команда:
Команда: APLKEY
Program ERROR: no function definition: A+APLUSINIT
Resetting...
Невозможно вызвать (command) из *error* без предварительного вызова (*push-error-using-command*).
Рекомендуется преобразовать (command) в (command-s).
Команда:
--------
AutocadMechanical2017ru
QUOTE (zaplan @ 6.03.2017 - 10:04)
Help me. That this?
Команда: _appload APLKEY 17.024.VLX успешно загружено.
Команда:
Команда:
Команда: APLKEY
Program ERROR: no function definition: A+APLUSINIT
Resetting...
Невозможно вызвать (command) из *error* без предварительного вызова (*push-error-using-command*).
Рекомендуется преобразовать (command) в (command-s).
Команда:
--------
AutocadMechanical2017ru
Still working for me...
[/img]
Thanks
Slinger
6.03.2017 - 09:54
Добавьте aplus.vlx в автозагрузку (через _appload). Он у меня ни в одном автокаде не хочет подгружаться автоматически (за исключением меню, которое бесполезно без подгруженного .vlx)
-----
In mostly cases Autocad won't start Aplus so add aplus.vlx in autoload section using _appload command.
912345678
7.03.2017 - 09:48
7. Open the aplus.vlx file in HEX Editor.
i don't finded 51 0D D6 43 in HEX, please help me.
Thanks!
Command: APLKEY
; error: bad argument type: stringp nil
Help me. That this?
QUOTE (Svet @ 7.03.2017 - 16:24)
Command: APLKEY
; error: bad argument type: stringp nil
Help me. That this?
Load aplus.vlx again and then reload APLKEY and report if error occurs again.
Thanks
Command: _appload aplus.vlx successfully loaded.
Command: The commands APLUS are curently loaded but this computer is without the licence.
You have 28 days more to test this commands.
Command:
Command: APLKEY
; error: no function definition: A+ZROBLIC
Slinger
7.03.2017 - 14:29
Svet, close autocad, start again, then apply aplus.vlx, then apply APLKEY
santorini
7.03.2017 - 14:49
After installing and aplaying the key received
Command: APLKEY
; error: no function definition: A+ZROBLIC
After installing second time (whitout uninstalling but as Administrator) all work when using APLKEY.
Must see
Try. Use Run as Administrator.
Для просмотра полной версии этой страницы, пожалуйста,
пройдите по ссылке.