IPB

Здравствуйте, гость ( Вход | Регистрация )

9 страниц V  « < 3 4 5 6 7 > »   
Ответить в данную темуНачать новую тему
Техническоя литература, Только здесь ссылки на библиотеки
Williams
сообщение 13.07.2019 - 09:44
Сообщение #81


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Theodore Gresh - Compressor Performance: Aerodynamics for the User Third Edition

Butterworth-Heinemann, 2018
pdf, 280 pages, english
ISBN-10: 0128142197
ISBN-13: 978-0128142196




Compressor Performance: Aerodynamics for the User, Third Edition continues the book's 25 year history as a trusted reference on compressor design and maintenance. This new edition is updated throughout to cover new regulations and technology relevant to compressors, with new content adding coverage of strings of equipment, including gas turbines. Users will find sections that run the full spectrum of information needed for an individual to select, operate, test and maintain axial or centrifugal compressors. In addition, basic aerodynamic theory provides users with the how's and why's of compressor design, and troubleshooting guidelines help maintenance engineers save time in the field.Provides detailed instructions for best practice field performance tests to ASME standards. Includes illustrations with detailed diagrams of compressor equipment. Presents new case studies of equipment string analysis. Includes extensive reference material in an appendix, including Mollier diagrams, permissible deviations and fluctuations, and surge identification procedures.

https://turbobit.net/dy2i3nrdmmao.html
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 25.07.2019 - 17:46
Сообщение #82


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Marc Budinger, Ion Hazyuk, Clement Coic - Multi-Physics Modeling of Technological Systems

Wiley, 2019
pdf, 381 pages, english
ISBN: ISBN: 978-1-119-64434-7




The development of mechatronic and multidomain technological systems requires the dynamic behavior to be simulated before detailed CAD geometry is available. This book presents the fundamental concepts of multiphysics modeling with lumped parameters.

The approach adopted in this book, based on examples, is to start from the physical concepts, move on to the models and their numerical implementation, and finish with their analysis. With this practical problem-solving approach, the reader will gain a deep understanding of multiphysics modeling of mechatronic or technological systems – mixing mechanical power transmissions, electrical circuits, heat transfer devices and electromechanical or fluid power actuators.

Most of the book's examples are made using Modelica platforms, but they can easily be implemented in other 0D/1D multidomain physical system simulation environments such as Amesim, Simulink/Simscape, VHDL-AMS and so on.

link.
26 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 27.07.2019 - 20:47
Сообщение #83


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Ying-Kit Choi - Principles of Applied Civil Engineering Design, Second Edition

American Society of Civil Engineers, 2017
pdf, 364 pages, english
ISBN 978-0-7844-1473-6 (print)
ISBN 978-0-7844-8055-7 (PDF)
ISBN 978-0-7844-8056-4 (ePUB)




rinciples of Applied Civil Engineering Design: Producing Drawings, Specifications, and Cost Estimates for Heavy Civil Projects walks engineers through standard practice and basic principles needed to prepare quality design and construction documents for a successful infrastructure project. Drawing on more than 30 years of engineering and design experience, Ying-Kit Choi helps readers understand the interrelationships among contract documents, site characterization, design and construction documents, and construction cost estimates. Choi introduces the fundamentals and process of applied engineering design, including the necessary field investigations to characterize a project site. He provides pragmatic guidance on the "how-to" of producing construction drawings, with advice on graphical representation; legends, abbreviations, and notes; drawing techniques and software; and certification of construction drawings. He offers a wealth of details on developing technical specifications, including good writing practices, types of construction specifications, the standardized Construction Specifications Institute format, measurement and payment provisions, and reference data. Chapters on cost estimating cover quantity estimates, pricing estimates, allowances and contingencies, and bid evaluation. A handy glossary defines common terms. This second edition reflects the rapid changes in the methods and tools used to produce design drawings, updating the discussions of presentation formats and technical resources. The 2014 Construction Specifications Institute format is introduced for use in preparing specifications and estimating construction costs. Nine chapters encourage readers to test their comprehension with example problems and solutions. By setting out the guidelines, principles, and philosophy needed to produce design and construction documents for heavy civil projects, Choi assembles an excellent introduction for civil engineering students and young professionals, as well as provides a valuable reference for experienced design engineers, contractors, and project owners.

link.
9 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 3.08.2019 - 18:06
Сообщение #84


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Seongwoo Woo - Reliability Design of Mechanical Systems
A Guide for Mechanical and Civil Engineers
Second Edition


Springer, 2019
pdf, 476 pages, english
ISBN 978-981-13-7235-3




The revised edition of this book offers an expanded overview of the reliability design of mechanical systems and describes the reliability methodology, including a parametric accelerated life test (ALT) plan, a load analysis, a tailored series of parametric ALTs with action plans, and an evaluation of the final designs to ensure the design requirements are satisfied. It covers both the quantitative and qualitative approaches of the reliability design forming in the development process of mechanical products, with a focus on parametric ALT and illustrated via case studies. This new reliability methodology – parametric ALT should help mechanical and civil engineers to uncover design parameters improving product design and avoiding recalls. Updated chapters cover product recalls and assessment of their significance, modern definitions in reliability engineering, parametric accelerated life testing in mechanical systems, and extended case studies. For this revised edition, one new chapter has been introduced to reflect recent developments in analysis of fluid motion and mechanical vibration. Other chapters are expanded and updated to improve the explanation of topics including structures and load analysis, failure mechanics, design and reliability testing, and mechanical system failure. The broad scope gives the reader an overview of the state-of-the-art in the reliability design of mechanical systems and an indication of future directions and applications. It will serve as a solid introduction to the field for advanced students, and a valuable reference for those working in the development of mechanical systems and related areas.

link.
19 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 19.08.2019 - 09:44
Сообщение #85


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson - Refrigeration and Air Conditioning Technology, 8 Edition

Cengage Learning, 2016
pdf, 1730 pages, english
ISBN: 978-1-305-57829-6




Develop the knowledge and skills you need to maintain and troubleshoot today's complex heating, air conditioning, and refrigeration systems with REFRIGERATION AND AIR CONDITIONING TECHNOLOGY, 8th Edition. This practical, easy-to-understand book provides hands-on guidance, practical applications, and the solid foundation you need to fully understand today's HVAC service and repair, its environmental challenges, and their solutions. Focused on sustainable technology in today's HVAC/R industry with an emphasis on new technologies and green awareness, the 8th Edition covers the latest advances in the industry and the all-important soft skills and customer relations issues that impact customer satisfaction and employment success. Memorable examples, more than 260 supporting photos, and unique Service Call features bring concepts to life and help you develop the critical skills you need for success in your future career. Now available with this text is The Complete HVAC Lab Manual, which features over 250 lab exercises, covering 15 topic areas. See the supplements section for more details.

link.
153 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
ronalsc
сообщение 23.09.2019 - 17:23
Сообщение #86


Новичок


Группа: Banned
Пользователь №: 167356
Сообщений: 15
Регистрация: 19.03.2014
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 6 раз(а)



Someone has this book, I could share it.

Analysis of Water Distribution Networks - PR Bhave and R. Gupta.

https://www.amazon.in/Analysis-Water-Distribution-Networks-Bhave/dp/8173197784/ref=mp_s_a_1_1?qid=1569248171&refinements=p_27%3AP.R.+Bhave&s=books&sr=1-1

Thanks......
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 20.10.2019 - 10:15
Сообщение #87


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Мангушев Р.А., Усманов Р.А. - Механика грунтов. Решение практических задач

Юрайт, 2019
pdf, 109 pages, russian
ISBN: 978-5-534-08990-5




Учебное пособие посвящено основным положениям механики грунтов. Книга включает краткое изложение методики расчета по соответствующим разделам курса, примеры решения задач и варианты заданий по каждому разделу для самостоятельной работы студентов. Книга содержит большое количество таблиц и иллюстраций, которые помогут студентам лучше усвоить материалы учебного пособия. Соответствует актуальным требованиям Федерального государственного образовательного стандарта среднего профессионального образования и профессиональным требованиям.
Для студентов образовательных учреждений среднего профессионального образования.

Оглавление:
1. Определение нормативных и расчетных значений характеристик грунтов
2. Определение напряжений в грунтах
3. Расчет оснований по несущей способности
4. Определение нижней границы сжимаемой толщи (активной зоны) грунта в основании фундаментов
5. Определение осадки фундаментов методом эквивалентного слоя
6. Определение осадки фундаментов методом линейно-деформируемого слоя
7. Определение осадки фундаментов с учетом загружения соседних фундаментов и площадей
8. Определение осадки жесткого фундамента во времени
9. Определение давления грунтов на ограждающие конструкции (подпорные стены)

https://turbobit.net/mk40yzgove8u.html
or
https://oxy.cloud/d/Hucb
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
istigatore
сообщение 10.01.2020 - 20:37
Сообщение #88


Живущий здесь
Иконка группы

Группа: Админы
Пользователь №: 97235
Сообщений: 6674
Регистрация: 6.10.2008
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 7666 раз(а)



Optical Satellite Signal Processing and Enhancement
Приватный текст
Написать 10 сообщений (10 осталось)


Learning to Understand Remote Sensing Images Volume 1
Приватный текст
Написать 10 сообщений (10 осталось)


Learning to Understand Remote Sensing Images Volume 2
Приватный текст
Написать 10 сообщений (10 осталось)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 7.03.2020 - 15:16
Сообщение #89


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Yunus A. Cengel - Heat and Mass Transfer. Fundamental and Application. 2nd Edition.

2002 year
pdf, 1300 pages, english




This manual is prepared as an aide to the instructors in correcting homework assignments, but it can also be used as a source of additional example problems for use in the classroom. With this in mind, all solutions are prepared in full detail in a systematic manner, using a word processor with an equation editor. The solutions are structured into the following sections to make it easy to locate information and to follow the solution procedure, as appropriate:
Solution - The problem is posed, and the quantities to be found are stated.
Assumptions - The significant assumptions in solving the problem are stated.
Properties - The material properties needed to solve the problem are listed.
Analysis - The problem is solved in a systematic manner, showing all steps.
Discussion - Comments are made on the results, as appropriate.

= link.
7 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 17.04.2020 - 13:23
Сообщение #90


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Andreas Ochsner - Computational Statics and Dynamics, An Introduction Based on the Finite Element Method, 2 Edition

Springer, 2020
pdf, 616 pages, english
ISBN: 978-981-15-1277-3




This book is the 2nd edition of an introduction to modern computational mechanics based on the finite element method. It includes more details on the theory, more exercises, and more consistent notation; in addition, all pictures have been revised. Featuring more than 100 pages of new material, the new edition will help students succeed in mechanics courses by showing them how to apply the fundamental knowledge they gained in the first years of their engineering education to more advanced topics. In order to deepen readers’ understanding of the equations and theories discussed, each chapter also includes supplementary problems. These problems start with fundamental knowledge questions on the theory presented in the respective chapter, followed by calculation problems. In total, over 80 such calculation problems are provided, along with brief solutions for each. This book is especially designed to meet the needs of Australian students, reviewing the mathematics covered in their first two years at university. The 13-week course comprises three hours of lectures and two hours of tutorials per week.

link.
20 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 17.04.2020 - 16:56
Сообщение #91


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Raphael Boulbes - Troubleshooting Finite-Element Modeling with Abaqus
With Application in Structural Engineering Analysis


Springer, 2020
pdf, 453 pages, english
ISBN: 978-3-030-26740-7




This book gives Abaqus users who make use of finite-element models in academic or practitioner-based research the in-depth program knowledge that allows them to debug a structural analysis model. The book provides many methods and guidelines for different analysis types and modes, that will help readers to solve problems that can arise with Abaqus if a structural model fails to converge to a solution. The use of Abaqus affords a general checklist approach to debugging analysis models, which can also be applied to structural analysis.

The author uses step-by-step methods and detailed explanations of special features in order to identify the solutions to a variety of problems with finite-element models. The book promotes:
• a diagnostic mode of thinking concerning error messages;
• better material definition and the writing of user material subroutines;
• work with the Abaqus mesher and best practice in doing so;
• the writing of user element subroutines and contact features with convergence issues; and
• consideration of hardware and software issues and a Windows HPC cluster solution.

The methods and information provided facilitate job diagnostics and help to obtain converged solutions for finite-element models regarding structural component assemblies in static or dynamic analysis. The troubleshooting advice ensures that these solutions are both high-quality and cost-effective according to practical experience.

The book offers an in-depth guide for students learning about Abaqus, as each problem and solution are complemented by examples and straightforward explanations. It is also useful for academics and structural engineers wishing to debug Abaqus models on the basis of error and warning messages that arise during finite-element modelling processing.

link.
10 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 23.04.2020 - 11:30
Сообщение #92


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Very good library of valuable rear civil engineering books!!!
https://mega.nz/folder/NIEBiQSZ#QyPSjnFRY3fuIWuuBZFFUQ
Прикрепленные файлы
Прикрепленный файл  Snap32.jpg ( 223.65 килобайт ) Кол-во скачиваний: 92
 
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 23.04.2020 - 17:41
Сообщение #93


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Chuanzhi Huang - Limit Analysis Theory of the Soil Mass and Its Application

Springer, 2020
pdf, 472 pages, english
ISBN: 978-981-15-1571-2




In the geotechnical engineering, stability is a key factor of the engineering success. It is one of long-term objectives for scientists and engineers to strive for limit analysis theories and methods on and for stability of the slope, ground bearing capacity, and soil pressure. For the port construction, it is developing toward the large-size and deep water areas. As the natural environment conditions, including ground, are relatively poor, it puts forward higher requirements for analysis and calculation theory on geotechnical engineering. The author and his colleagues work together to, based on the former work, make some progress by original study methods. Hereby, the study achievements are collated into a book, which is of great significance.

Main features of the book are described as follows: It provides the extremum condition of the yield function and regards it as one of fundamental equations so that one set of complete fundamental equations are available for the limit analysis, and it constitutes a complete limit equilibrium or variation issue. On this basis, a brand-new solution method—generalized limit equilibrium method—is provided, which can be mutually corroborated with limit equilibrium method, slip line method, and upper- and lower-bound plasticity analysis method. During the study on slope stability, it avoids such study model as solving the statically indeterminate problem by introducing assumptions, which is commonly applied in the classical methods; the proposed slope stability analysis method is more consummate, and the calculation results are more reliable. In the study on the ground bearing capacity, it solves not only the calculation problem on the ground bearing capacity of heterogeneous soil, but also the application scopes of calculation methods are more extensive. Therefore, all above are innovative achievements, and its brand-new limit equilibrium analysis theory is more scientific compared with the former work.

Another feature of the book is the close combination of the study and engineering practices, together with the stress on practical problems in the engineering. For example, the calculation method for the ground bearing capacity is established in consideration of port engineering features; for tens of engineering examples, different calculation methods are applied for the calculation and analysis, and it has verified that the proposed method is of extensive application prospects.

link.
4 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 26.04.2020 - 11:00
Сообщение #94


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Holm Altenbach, Andreas Цchsner - Encyclopedia of Continuum Mechanics

Springer, 2020
pdf, 2837 pages, english
ISBN: 978-3-662-55770-9




This Encyclopedia covers the entire science of continuum mechanics including the mechanics of materials and fluids. The encyclopedia comprises mathematical definitions for continuum mechanical modeling, fundamental physical concepts, mechanical modeling methodology, numerical approaches and many fundamental applications. The modelling and analytical techniques are powerful tools in mechanical civil and areospsace engineering, plus in related fields of plasticity, viscoelasticity and rheology. Tensor-based and reference-frame-independent, continuum mechanics has recently found applications in geophysics and materials.

link.
74 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 29.04.2020 - 11:25
Сообщение #95


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Mary Anderson William Woessner Randall Hunt - Applied Groundwater Modeling, 2nd Edition
Simulation of Flow and Advective Transport


Elsevier, 2015
pdf, 602 pages, english
ISBN: 978-0-120-58103-0




This second edition is extensively revised throughout with expanded discussion of modelling fundamentals and coverage of advances in model calibration and uncertainty analysis that are revolutionising the science of groundwater modelling. The text is intended for undergraduate and graduate level courses in applied groundwater modelling and as a comprehensive reference for environmental consultants and scientists/engineers in industry and governmental agencies.

Key Features
- Explains how to formulate a conceptual model of a groundwater system and translate it into a numerical model
- Demonstrates how modelling concepts, including boundary conditions, are implemented in two groundwater flow codes-- MODFLOW (for finite differences) and FEFLOW (for finite elements)
- Discusses particle tracking methods and codes for flowpath analysis and advective transport of contaminants
- Summaries parameter estimation and uncertainty analysis approaches using the code PEST to illustrate how concepts are implemented
- Discusses modelling ethics and preparation of the modelling report
- Includes Boxes that amplify and supplement topics covered in the text
- Each chapter presents lists of common modelling errors and problem sets that illustrate concepts

For graduate students and practising professionals in groundwater hydrology, civil engineers and environmental consultants, and scientists/engineers in industry and governmental agencies who deal with groundwater.

link.
56 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 30.04.2020 - 15:43
Сообщение #96


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Robert Coppolino - The Integrated Test Analysis Process for Structural Dynamic Systems

Morgan & Claypool Publishers, 2020
pdf, 166 pages, english
ISBN: 978-1-681-73681-5




Over the past 60 years, the U.S. aerospace community has developed, refined, and standardized an integrated approach to structural dynamic model verification and validation. One name for this overall approach is the Integrated Test Analysis Process (ITAP) for structural dynamic systems. ITAP consists of seven sequential tasks, namely: (1) definition of test article finite element models; (2) systematic modal test planning; (3) measured data acquisition; (4) measured data analysis; (5) experimental modal analysis; (6) systematic test-analysis correlation; and (7) reconciliation of finite element models and modal test data. Steps 1, 2, and 7 rely strictly on mathematical model disciplines, and steps 3 and 4 rely on laboratory disciplines and techniques. Current industry practice of steps 5 and 6 calls for interaction of mathematical model and laboratory disciplines, which compromises the objectivity of both modeling and laboratory disciplines. This book addresses technical content, strategies, and key relevant experiences related to all steps of ITAP, except for measured data acquisition which is the specialized domain of highly experienced laboratory professionals who contend with mechanical and electrical practicalities of instrumentation, excitation hardware, and data collection systems.

link.
74 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 1.05.2020 - 19:45
Сообщение #97


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Levon Petrosian, Vladimir Ambartsumian - Static and Dynamic Analysis of Engineering Structures: Incorporating the Boundary Element Method

Wiley, 2020
pdf, 520 pages, english
ISBN: 978-1-119-59283-9




Static and Dynamic Analysis of Engineering Structures examines static and dynamic analysis of engineering structures for methodological and practical purposes. In one volume, the authors – noted engineering experts – provide an overview of the topic and review the applications of modern as well as classic methods of calculation of various structure mechanics problems. They clearly show the analytical and mechanical relationships between classical and modern methods of solving boundary value problems.


The first chapter offers solutions to problems using traditional techniques followed by the introduction of the boundary element methods. The book discusses various discrete and continuous systems of analysis. In addition, it offers solutions for more complex systems, such as elastic waves in inhomogeneous media, frequency-dependent damping and membranes of arbitrary shape, among others. Static and Dynamic Analysis of Engineering Structures is filled with illustrative examples to aid in comprehension of the presented material.

The book:
- Illustrates the modern methods of static and dynamic analysis of structures;
- Provides methods for solving boundary value problems of structural mechanics and soil mechanics;
- Offers a wide spectrum of applications of modern techniques and methods of calculation of static, dynamic and seismic problems of engineering design;
- Presents a new foundation model.

Written for researchers, design engineers and specialists in the field of structural mechanics, Static and Dynamic Analysis of Engineering Structures provides a guide to analyzing static and dynamic structures, using traditional and advanced approaches with real-world, practical examples.

link.
5 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 4.05.2020 - 20:57
Сообщение #98


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Oliver O’Reilly - Intermediate Dynamics for Engineers: Newton-Euler and Lagrangian Mechanics, 2nd Edition

Cambridge University Press, 2020
pdf, 545 pages, english
ISBN: 978-1-108-49421-2




Suitable for both senior-level and first-year graduate courses, this fully revised edition provides a unique and systematic treatment of engineering dynamics that covers Newton-Euler and Lagrangian approaches. New to this edition are: two completely revised chapters on the constraints on, and potential energies for, rigid bodies, and the dynamics of systems of particles and rigid bodies; clearer discussion on coordinate singularities and their relation to mass matrices and configuration manifolds; additional discussion of contravariant basis vectors and dual Euler basis vectors, as well as related works in robotics; improved coverage of navigation equations; inclusion of a 350-page solutions manual for instructors, available online; a fully updated reference list. Numerous structured examples, discussion of various applications, and exercises covering a wide range of topics are included throughout, and source code for exercises, and simulations of systems are available online.

link.
7 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 6.05.2020 - 10:44
Сообщение #99


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



Benito Stradi-Granados - Cloud Computing for Engineering Applications

Springer, 2020
pdf, 384 pages, english
ISBN: 978-3-030-40444-4




This book explains the use of cloud computing systems for engineering applications to satisfy the need for enterprise level, state-of-the-art computational capacities at an affordable cost. As huge costs are involved in the maintenance and timely renovation of computational capabilities, particularly for projects that require significant computational capacity, cloud services can achieve considerable savings for users and organizations engaged in engineering research and development. Dr. Stradi-Granados explains how to extract a maximum value from every dollar invested in cloud computer server. The types of facilities located around the world that lease their resources to customers interested in reducing the internal overhead and implementation time. The volume features chapters on model generation, motion studies, and prototyping is ideal for students, researchers, practitioners, and facility's managers across a range of engineering domains.

link.
30 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 8.05.2020 - 16:07
Сообщение #100


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55383 раз(а)



James Wilkes - Fluid Mechanics for Chemical Engineers, Third Edition
with Microfluidics, CFD, and COMSOL Multiphysics 5


Pearson, 2018
pdf, 807 pages, english
ISBN: 978-0-13-471282-6




Since most chemical processing applications are conducted either partially or totally in the fluid phase, chemical engineers need mastery of fluid mechanics. Such knowledge is especially valuable in the biochemical, chemical, energy, fermentation, materials, mining, petroleum, pharmaceuticals, polymer, and waste-processing industries.

Fluid Mechanics for Chemical Engineers: with Microfluidics, CFD, and COMSOL Multiphysics 5, Third Edition, systematically introduces fluid mechanics from the perspective of the chemical engineer who must understand actual physical behavior and solve real-world problems. Building on the book that earned Choice Magazine’s Outstanding Academic Title award, this edition also gives a comprehensive introduction to the popular COMSOL Multiphysics 5 software.

This third edition contains extensive coverage of both microfluidics and computational fluid dynamics, systematically demonstrating CFD through detailed examples using COMSOL Multiphysics 5 and ANSYS Fluent. The chapter on turbulence now presents valuable CFD techniques to investigate practical situations such as turbulent mixing and recirculating flows.

Part I offers a clear, succinct, easy-to-follow introduction to macroscopic fluid mechanics, including physical properties; hydrostatics; basic rate laws; and fundamental principles of flow through equipment. Part II turns to microscopic fluid mechanics:
- Differential equations of fluid mechanics
- Viscous-flow problems, some including polymer processing
- Laplace’s equation; irrotational and porous-media flows
- Nearly unidirectional flows, from boundary layers to lubrication, calendering, and thin-film applications
- Turbulent flows, showing how the k-ε method extends conventional mixing-length theory
- Bubble motion, two-phase flow, and fluidization
- Non-Newtonian fluids, including inelastic and viscoelastic fluids
- Microfluidics and electrokinetic flow effects, including electroosmosis, electrophoresis, streaming potentials, and electroosmotic switching
- Computational fluid mechanics with ANSYS Fluent and COMSOL Multiphysics

Nearly 100 completely worked practical examples include 12 new COMSOL 5 examples: boundary layer flow, non-Newtonian flow, jet flow, die flow, lubrication, momentum diffusion, turbulent flow, and others. More than 300 end-of-chapter problems of varying complexity are presented, including several from University of Cambridge exams. The author covers all material needed for the fluid mechanics portion of the professional engineer’s exam.

link.
9 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение

9 страниц V  « < 3 4 5 6 7 > » 
Ответить в данную темуНачать новую тему
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 



RSS Текстовая версия Сейчас: 28.03.2024 - 16:41
Ошибка работы драйвера БД

Ошибка при работе с базой данных

Возникла проблема при работе с базой данных.
Вы можете попробовать обновить эту страницу, нажав сюда