IPB

Здравствуйте, гость ( Вход | Регистрация )

12 страниц V  « < 8 9 10 11 12 >  
Ответить в данную темуНачать новую тему
Строительное проектирование, Ссылки на литературу по теме.
Williams
сообщение 18.04.2020 - 18:54
Сообщение #181


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Braja Das, Nagaratnam Sivakugan - Principles of Foundation Engineering. 9th SI Edition

Cengage Learning, 2019
pdf, 884 pages, english
ISBN-13: 978-1-337-70503-5




Soil mechanics and foundation engineering have developed rapidly during the last seventy years. Intensive research and observation in the field and the laboratory have refined and improved the science of foundation design. Originally published in the fall of 1983, Principles of Foundation Engineering is now in the
ninth edition. It is intended primarily for use by undergraduate civil engineering students. The use of this text throughout the world has increased greatly over the years. It has also been translated into several languages. New and improved materials that have been published in various geotechnical engineering journals and conference proceedings, consistent with the level of understanding of the intended users, have been incorporated into each edition of the text.

New to This Edition
Based on the increased developments in the field of geotechnical engineering, the authors have added three new chapters to this edition. The ninth edition of Principles of Foundation Engineering contains a total of 19 chapters. Listed here is a summary of the major revisions from the eighth edition and new additions to this edition.
● Numerous new photographs in full color have been included in various chapters as needed.
● The Introduction Chapter (Chapter 1) has been entirely revised and expanded with sections on geotechnical engineering, foundation engineering, soil exploration, ground improvement, solution methods, numerical modeling, empiricism, and literature.
● Chapter 2 on Geotechnical Properties of Soil includes new sections on the range of coefficient of consolidation and selection of shear strength parameters for design. All of the end-of-chapter problems are new.
● Chapter 3 on Natural Soil Deposits and Subsoil Exploration has an improved figure on soil behavior type chart based on cone penetration test.
● Chapter 4 on Instrumentation and Monitoring in Geotechnical Engineering is a new chapter that describes the use of instruments in geotechnical projects, such as piezometer, earth pressure cell, load cell, inclinometer, settlement plate, strain gauge, and others.
● Soil Improvement (Chapter 5) has some details on typical compaction requirements as well as improved figures in the section of precompression. About half of the problems at the end of the chapter are new.
● Chapter 6 on Shallow Foundations: Ultimate Bearing Capacity has new sections on a simple approach for bearing capacity with two-way eccentricities, and plane strain correction of friction angle.
● Chapter 7 on Ultimate Bearing Capacity on Shallow Foundation: Special Cases has a section on ultimate bearing capacity of a wedge-shaped foundation. About half of the end-of-chapter problems are new.
● Chapter 8 on Vertical Stress Increase in Soil has a new section on stress below a horizontal strip load of finite width and infinite length. The majority of the end-of-chapter problems are new.
● In Chapter 9 on Settlement of Shallow Foundations, Section 9.3 on settlement based on the theory of elasticity has been thoroughly revised with the addition of the results of the studies of Poulos and Davis (1974) and Giroud (1968). In Section 9.6, which discusses the topic of settlement of foundation on sand based on standard penetration resistance, Terzaghi and Peck’s method (1967) has been added. Elastic settlement considering soil stiffness variation with stress level is given in a new section (Section 9.7). Other additions include settlement estimation using the L1 – L2 method (Section 9.9) (Akbas and Kulhawy, 2009) and Shahriar et al.’s (2014) method to estimate elastic settlement in granular soil due to the rise of ground water table (Section 9.10). The section on tolerable settlement of buildings has been fully revised. More than half of the end-of-chapter problems are new.
● In Chapter 10 on Mat Foundations, the reinforcement design portion for the mats was removed to concentrate more on the geotechnical portion. All end-ofchapter problems are new.
● Chapter 11 on Load and Resistance Factor Design (LRFD) is a new chapter. It provides the design philosophies of the allowable stress design (ASD) and load and resistance factor design in a simple way.
● Chapter 12 on Pile Foundations has a new section defining point bearing and friction piles (Section 12.5). Section 12.5 on installation of piles has been thoroughly revised. Factor of safety for axially loaded piles suggested by USACE (1991) has been incorporated in Section 12.8 on equations for estimating pile capacity. The analysis by Poulos and Davis (1974) for estimation of elastic settlement of piles has been included in Section 9.17. About half of the end-ofchapter problems are new.
● In Chapter 13 on Drilled Shaft Foundations, several figures have been improved to aid in better interpolation for solving problems. More than half of the end-of-chapter problems are new.
● Chapter 14 on Piled Rafts—An Overview is a new chapter. It describes optimizations of the advantages of pile foundations and raft foundations for construction of very tall buildings.
● In Chapter 15 on Foundations on Difficult Soil, all but two of end-of-chapter problems are new.
● Chapter 16 on Lateral Earth Pressure has two new sections on (a) generalized case for Rankine seismic active pressure—granular backfill (Section 16.5), and (cool.gif solution for passive earth pressure by lower bound theorem of plasticity (Section 16.15). The section on passive force on walls with earthquake forces (Section 16.7) has been expanded. All end-of-chapter problems are new.
● In Chapter 17 on Retaining Walls, a new section (Section 17.10) on gravity retaining wall design for earthquake conditions has been added. Discussion on the properties of geotextile has been expanded along with some new geotextile photographs. More than half of the end-of-chapter problems are new.
● Chapter 18 on Sheet-Pile Walls has three new sections added: (a) cantilever sheet piles penetrating sandy soil—a simplified approach (Section 18.8); (cool.gif free earth support method for penetration of sandy soil—a simplified approach (Section 18.10); and © holding capacity of deadman anchors (Section 18.18). All end-of-chapter problems are new.
● In Chapter 19 on Braced Cuts, all end-of-chapter problems are new.
● Each chapter now includes a Summary section. New and revised example problems are presented in various chapters as needed.

link.
62 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 12.06.2020 - 09:00
Сообщение #182


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Dejan Mumovic, Mat Santamouris - A Handbook of Sustainable Building Design and Engineering,
An Integrated Approach to Energy, Health and Operational Performance, Second edition


Routledge, 2019
pdf, 604 pages, english
ISBN: 978-1-138-21547-4




The second edition of this authoritative textbook equips students with the tools they will need to tackle the challenges of sustainable building design and engineering. The book looks at how to design, engineer and monitor energy efficient buildings, how to adapt buildings to climate change, and how to make buildings healthy, comfortable and secure. New material for this edition includes sections on environmental masterplanning, renewable technologies, retrofitting, passive house design, thermal comfort and indoor air quality. With chapters and case studies from a range of international, interdisciplinary authors, the book is essential reading for students and professionals in building engineering, environmental design, construction and architecture.

link.
20 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 13.06.2020 - 12:20
Сообщение #183


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



T. Agami Reddy, Jan F. Kreider, Peter S. Curtiss, Ari Rab - Heating and Cooling of Buildings
Principles and Practice of Energy Efficient Design, Third Edition


CRC Press, 2017
pdf, 898 pages, english
ISBN: 978-1-4398-9989-2




Heating and Cooling of Buildings: Principles and Practice of Energy Efficient Design, Third Edition is structured to provide a rigorous and comprehensive technical foundation and coverage to all the various elements inherent in the design of energy efficient and green buildings. Along with numerous new and revised examples, design case studies, and homework problems, the third edition includes the HCB software along with its extensive website material, which contains a wealth of data to support design analysis and planning. Based around current codes and standards, the Third Edition explores the latest technologies that are central to design and operation of today’s buildings. It serves as an up-to-date technical resource for future designers, practitioners, and researchers wishing to acquire a firm scientific foundation for improving the design and performance of buildings and the comfort of their occupants. For engineering and architecture students in undergraduate/graduate classes, this comprehensive textbook.

link.
72 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 19.06.2020 - 11:17
Сообщение #184


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Subhabrata Ray, Gargi Das - Process Equipment and Plant Design, Principles and Practices

Elsevier, 2020
pdf, 841 pages, english
ISBN: 978-0-12-814885-3




Process Equipment and Plant Design: Principles and Practices takes a holistic approach towards process design in the chemical engineering industry, dealing with the design of individual process equipment and its configuration as a complete functional system. Chapters cover typical heat and mass transfer systems and equipment included in a chemical engineering curriculum, such as heat exchangers, heat exchanger networks, evaporators, distillation, absorption, adsorption, reactors and more. The authors expand on additional topics such as industrial cooling systems, extraction, and topics on process utilities, piping and hydraulics, including instrumentation and safety basics that supplement the equipment design procedure and help to arrive at a complete plant design. The chapters are arranged in sections pertaining to heat and mass transfer processes, reacting systems, plant hydraulics and process vessels, plant auxiliaries, and engineered safety as well as a separate chapter showcasing examples of process design in complete plants. This comprehensive reference bridges the gap between industry and academia, while exploring best practices in design, including relevant theories in process design making this a valuable primer for fresh graduates and professionals working on design projects in the industry.

Key Features
- Serves as a consolidated resource for process and plant design, including process utilities and engineered safety.
- Bridges the gap between industry and academia by including practices in design and summarizing relevant theories.
- Presents design solutions as a complete functional system and not merely the design of major equipment.
- Provides design procedures as pseudo-code/flow-chart, along with practical considerations.

link.
32 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 21.06.2020 - 19:17
Сообщение #185


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



David Jones, Michael Ashby - Engineering Materials 1
An Introduction to Properties, Applications and Design, 5 Edition


Elsevier, 2019
pdf, 588 pages, english
ISBN: 978-0-08-102051-7




Widely adopted around the world, Engineering Materials 1 is a core materials science and engineering text for third- and fourth-year undergraduate students; it provides a broad introduction to the mechanical and environmental properties of materials used in a wide range of engineering applications. The text is deliberately concise, with each chapter designed to cover the content of one lecture. As in previous editions, chapters are arranged in groups dealing with particular classes of properties, each group covering property definitions, measurement, underlying principles, and materials selection techniques. Every group concludes with a chapter of case studies that demonstrate practical engineering problems involving materials. The 5th edition boasts expanded properties coverage, new case studies, more exercises and examples, and all-around improved pedagogy.

Engineering Materials 1, Fifth Edition is perfect as a stand-alone text for a one-semester course in engineering materials or a first text with its companion Engineering Materials 2: An Introduction to Microstructures and Processing, in a two-semester course or sequence.

link.
69 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 26.06.2020 - 21:15
Сообщение #186


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Feng Fu - Design and Analysis of Tall and Complex Structures

Elsevier, 2018
pdf, 313 pages, english
ISBN: 978-0-08-101018-1




The design of tall buildings and complex structures involves challenging activities, including: scheme design, modelling, structural analysis and detailed design. This book provides structural designers with a systematic approach to anticipate and solve issues for tall buildings and complex structures.

This book begins with a clear and rigorous exposition of theories behind designing tall buildings. After this is an explanation of basic issues encountered in the design process. This is followed by chapters concerning the design and analysis of tall building with different lateral stability systems, such as MRF, shear wall, core, outrigger, bracing, tube system, diagrid system and mega frame. The final three chapters explain the design principles and analysis methods for complex and special structures. With this book, researchers and designers will find a valuable reference on topics such as tall building systems, structure with complex geometry, Tensegrity structures, membrane structures and offshore structures.

link.
32 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 4.07.2020 - 07:54
Сообщение #187


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Stephen Emmitt - Barry’s advanced construction of buildings, 4 Edition

Wiley, 2019
pdf, 560 pages, english
ISBN: 978-1-1189-7710-1




The revised fourth edition of Barry's Advanced Construction of Buildings expands on the resource that has become a standard text on the construction of buildings. The fourth edition covers the construction of larger-scale buildings (primarily residential, commercial and industrial) constructed with load bearing frames in timber, concrete and steel; supported by chapters on offsite construction, piling, envelopes to framed buildings, fit-out and second fix, lifts and escalators, building pathology, upgrading and demolition.

The author covers the functional and performance requirements of the main building elements as well as building efficiency and information on meeting the challenges of limiting the environmental impact of buildings. Each chapter includes new "at a glance" summaries that introduce the basic material giving a good understanding of the main points quickly and easily. The text is fully up to date with the latest building regulations and construction technology. This important resource:

- Covers design, technology, offsite construction, site assembly and environmental issues of larger-scale buildings including primarily residential, commercial and industrial buildings constructed with load bearing frames.
- Highlights the concept of building efficiency, with better integration of the topics throughout the text
- Offers new "at a glance" summaries at the beginning of each chapter.
- Is a companion to Barry's Introduction to Construction of Buildings, fourth edition.

Written for undergraduate students and those working towards similar NQF level 5 and 6 qualifications in building and construction, Barry's Advanced Construction of Buildings is a practical and highly illustrated guide to construction practice. It covers the materials and technologies involved in constructing larger scale buildings.

link.
74 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 15.07.2020 - 17:01
Сообщение #188


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Pijush Samui, Dookie Kim, Nagesh Iyer, Sandeep Chaudhary - New Materials in Civil Engineering

Elsevier, 2020
pdf, 1082 pages, english
ISBN: 978-0-12-818961-0




New Materials in Civil Engineering provides engineers and scientists with the tools and methods needed to meet the challenge of designing and constructing more resilient and sustainable infrastructures. This book is a valuable guide to the properties, selection criteria, products, applications, lifecycle and recyclability of advanced materials. It presents an A-to-Z approach to all types of materials, highlighting their key performance properties, principal characteristics and applications. Traditional materials covered include concrete, soil, steel, timber, fly ash, geosynthetic, fiber-reinforced concrete, smart materials, carbon fiber and reinforced polymers. In addition, the book covers nanotechnology and biotechnology in the development of new materials.

link.
85 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 20.07.2020 - 22:17
Сообщение #189


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Abi Aghayere, Jason Vigil - Structural Steel Design, Third Edition

Mercury Learning and Information, 2020
pdf, 956 pages, english
ISBN: 978-1-68392-367-1




Structural Steel Design, Third Edition is a simple, practical, and concise guide to structural steel design – using the Load and Resistance Factor Design (LRFD) and the Allowable Strength Design (ASD) methods -- that equips the reader with the necessary skills for designing real-world structures. Civil, structural, and architectural engineering students intending to pursue careers in structural design and consulting engineering, and practicing structural engineers will find the text useful because of the holistic, project-based learning approach that bridges the gap between engineering education and professional practice. The design of each building component is presented in a way such that the reader can see how each element fits into the entire building design and construction process. Structural details and practical example exercises that realistically mirror what obtains in professional design practice are presented.

link.
39 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 7.08.2020 - 20:12
Сообщение #190


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Ronald Woods, Cameron Andres, Ronald Smith - Principles and Practices of Commercial Construction, Tenth Edition

Pearson, 2019
pdf, 561 pages, english
ISBN-13: 978-0-13-470466-1




Principles and Practices of Commercial Construction teaches students how to apply design theory to the construction process, providing crucial working knowledge for contractors managing subcontractors. Progressing from basic to advanced material, the text appears on the approved reference list for numerous states requiring contractors to pass licensing exams. Its flexible organization gives instructors the option of teaching each chapter on a standalone basis in a range of construction, architecture, and engineering courses. The 10th edition expands its discussion of practical applications in structural design projects and adds practice opportunities preparing students for licensing exams.

link.
28 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 9.08.2020 - 09:37
Сообщение #191


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



K. L. Mittal, S. K. Panigrahi - Structural Adhesive Joints: Design, Analysis, and Testing

Wiley, 2020
pdf, 342 pages, english
ISBN: 978-1-119-73643-1




Most structures are comprised of a number of individual parts or components which have to be connected to form a system with integral load transmission path. The structural adhesive bonding represents one of the most enabling technologies to fabricate most complex structural configurations involving advanced materials (e.g. composites) for load-bearing applications. Quite recently there has been a lot of activity in harnessing nanotechnology (use of nanomaterials) in ameliorating the existing or devising better performing structural adhesives.
The 10 chapters by subject matter experts look at the following issues: surface preparation for structural adhesive joints SAJ, use of nanoparticles in enhancing performance of SAJ, optimization of SAJ, durability aspects of SAJ, debonding of SAJ, fracture mechanics of SAJ, failure analysis of SAJ, damage behavior in functionally graded SAJ, impact, shock and vibration characteristics of composites for SAJ, delamination arrest methods in SAJ.

link.
14 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 10.08.2020 - 18:04
Сообщение #192


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Mustafa Mahamid, Edwin Gaylord, Charles Gaylord - Structural Engineering Handbook, Fifth Edition

McGraw Hill, 2020
pdf, 958 pages, english
ISBN: 978-1-26-011599-4




This Handbook is the industry-standard guide to structural engineering - fully updated for the latest advances and regulations.

For 50 years, this internationally renowned handbook has been the go-to reference for structural engineering specifications, codes, technologies, and procedures. Featuring contributions from a variety of experts, the book has been revised to align with the codes that govern structural design and materials, including IBC, ASCE 7, ASCE 37, ACI, AISC, AASHTO, NDS, and TMS. Concise, practical, and user-friendly, this one-of-a-kind resource contains real-world examples and detailed descriptions of today’s design methods.

Structural Engineering Handbook, Fifth Edition, covers:
- Computer applications in structural engineering.
- Earthquake engineering.
- Fatigue, brittle fracture, and lamellar tearing.
- Soil mechanics and foundations.
- Design of steel structural and composite members.
- Plastic design of steel frames.
- Design of cold-formed steel structural members.
- Design of aluminum structural members.
- Design of reinforced- and prestressed-concrete structural members.
- Masonry construction and timber structures.
- Arches and rigid frames.
- Bridges and girder boxes.
- Building design and considerations.
- Industrial and tall buildings.
- Thin-shell concrete structures.
- Special structures and nonbuilding structures.

link.
576 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 12.08.2020 - 10:15
Сообщение #193


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Michael Lindeburg - Civil Engineering Reference Manual for the PE Exam, Fifteenth Edition

PPI, 2015
pdf, 1648 pages, english
ISBN-13: 9781591265085
ISBN-10: 1591265088




Since 1975, PPI has helped over 4 million engineers, architects, and designers achieve their licensure goals.

Comprehensive Civil PE Exam Coverage The Civil Engineering Reference Manual is the most comprehensive textbook for the NCEES Civil PE exam. This book's time-tested organization and clear explanations start with the basics to help you quickly get up to speed with common civil engineering concepts. Together, the 90 chapters provide an in-depth review of all of the topics, codes, and standards listed in the NCEES Civil PE specifications. The extensive index contains thousands of entries, with multiple entries included for each topic, so you can find the topics referenced no matter how you search. This book features: over 100 appendices containing essential support material over 500 clarifying examples over 550 common civil engineering terms defined in an easy-to-use glossary thousands of equations, figures, and tables industry-standard terminology and nomenclature equal support of U.S. customary and SI units After you pass your exam, the Civil Engineering Reference Manual will continue to serve as an invaluable reference throughout your civil engineering career. Exam Topics Covered Civil Breadth: Project Planning; Means and Methods; Soil Mechanics; Structural Mechanics; Hydraulics and Hydrology; Geometrics; Materials; Site Development Construction: Earthwork Construction and Layout; Estimating Quantities and Costs; Construction Operations and Methods; Scheduling; Material Quality Control and Production; Temporary Structures; Health and Safety. For additional Construction Depth coverage, check out the Construction Depth Reference Manual. Geotechnical Site Characterization; Soil Mechanics, Laboratory Testing, and Analysis; Field Materials Testing, Methods, and Safety; Earthquake Engineering and Dynamic Loads; Earth Structures; Groundwater and Seepa≥ Problematic Soil and Rock Conditions; Earth Retaining Structures; Shallow Foundations; Deep Foundations Structural: Analysis of Structures; Design and Details of Structures; Codes and Construction. For additional Structural coverage, check out the Structural Engineering Reference Manual . Transportation: Traffic Engineering; Horizontal Design; Vertical Design; Intersection Geometry; Roadside and Cross-Section Design; Signal Design; Traffic Control Design; Geotechnical and Pavement; Draina≥ Alternatives Analysis. For additional Transportation Depth coverage, check out the Transportation Depth Reference Manual. Water Resources and Environmental: Analysis and Design; Hydraulics-Closed Conduit; Hydraulics-Open Channel; Hydrology; Groundwater and Wells; Wastewater Collection and Treatment; Water Quality; Drinking Water Distribution and Treatment; Engineering Economic Analysis.

link.
26 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
istigatore
сообщение 13.08.2020 - 22:30
Сообщение #194


Живущий здесь
Иконка группы

Группа: Админы
Пользователь №: 97235
Сообщений: 6674
Регистрация: 6.10.2008
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 7666 раз(а)



An Introduction to Excel for Civil Engineers: From engineering theory to Excel practice
Приватный текст
Написать 10 сообщений (10 осталось)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 17.08.2020 - 11:28
Сообщение #195


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Antonio Reis, Jose Oliveira Pedro - Bridge Design: Concepts and Analysis

Wiley, 2019
pdf, 541 pages, english
ISBN: 978-0-470-84363-5




Bridge Design - Concepts and Analysis provides a unique approach, combining the fundamentals of concept design and structural analysis of bridges in a single volume. The book discusses design solutions from the authors’ practical experience and provides insights into conceptual design with concrete, steel or composite bridge solutions as alternatives.

Key features:
- Principal design concepts and analysis are dealt with in a unified approach.
- Execution methods and evolution of the static scheme during construction are dealt with for steel, concrete and composite bridges.
- Aesthetics and environmental integration of bridges are considered as an issue for concept design.
- Bridge analysis, including modelling and detail design aspects, is discussed for different bridge typologies and structural materials.
- Specific design verification aspects are discussed on the basis of present design rules in Eurocodes.

The book is an invaluable guide for postgraduate students studying bridge design, bridge designers and structural engineers.

link.
20 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 24.08.2020 - 10:36
Сообщение #196


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Hwai-Chung Wu, Christopher Eamon - Strengthening of Concrete Structures Using Fiber Reinforced Polymers

Elsevier, 2017
pdf, 342 pages, english
ISBN: 978-0-08-100636-8




Strengthening of Concrete Structures Using Fiber Reinforced Polymers (FRP): Design, Construction and Practical Applications presents a best practice guide on the structural design and strengthening of bridge structures using advanced Fiber Reinforced Polymer (FRP) composites. The book briefly covers the basic concepts of FRP materials and composite mechanics, while focusing on practical design and construction issues, including inspection and quality control, paying special attention to the differences in various design codes (US, Japan, and Europe) and recommendations.

At present, several design guides from the US, Japan, and Europe are available. These guidelines are often inconsistent and do not cover all necessary design and inspection issues to the same degree of detail. This book provides a critical review and comparison of these guidelines, and then puts forward best practice recommendations, filling a significant gap in the literature, and serving as an important resource for engineers, architects, academics, and students interested in FRP materials and their structural applications. Written from a practitioner's point-of-view, it is a valuable design book for structural engineers all over the world.

-Includes a large quantity of design examples and structural software to facilitate learning and help readers perform routine design
-Provides recommendations for best practices in design and construction for the strengthening of bridge structures using advanced fiber-reinforced polymer (FRP) composites
-Presents comprehensive guidelines on design, inspection, and quality control, including laboratory and field testing information

link.
6 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 26.08.2020 - 09:26
Сообщение #197


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Dongzhou Huang,Bo Hu - Concrete Segmental Bridges
Theory, Design, and Construction to AASHTO LRFD Specifcations


CRC, 2020
pdf, 1028 pages, english
ISBN: 978-1-4987-9900-3




Segmental concrete bridges have become one of the main options for major transportation projects world-wide. They offer expedited construction with minimal traffic disruption, lower life cycle costs, appealing aesthetics and adaptability to a curved roadway alignment. The literature is focused on construction, so this fills the need for a design-oriented book for less experienced bridge engineers and for senior university students.

It presents comprehensive theory, design and key construction methods, with a simple design example based on the AASHTO LRFD Design Specifications for each of the main bridge types. It outlines design techniques and relationships between analytical methods, specifications, theory, design, construction and practice. It combines mathematics and engineering mechanics with the authors’ design and teaching experience.

link.
94 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 19.10.2020 - 11:57
Сообщение #198


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



M. Rashad Islam, Rafiqul A. Tarefder - Pavement Design
Materials, Analysis, and Highways


McGraw Hill, 2020
pdf, 574 pages, english
ISBN: 978-1-26-045892-3




The authors are delighted to introduce this pavement design book to civil engineering students. It focuses on the most recent invention in pavement design, the pavement mechanistic-empirical (ME) design approach. Practical design examples are included in this textbook to help students understand the pavement mechanics and models used in this new approach. Fundamentals of Engineering (FE) exam-style questions are also included so that this book can be helpful for the FE examination as well. The authors believe that this text will be valuable for understanding pavement engineering.

link.
182 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 20.10.2020 - 11:21
Сообщение #199


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



Athanassios Nikolaides - Highway Engineering
Pavements, Materials and Control of Quality


CRC, 2015
pdf, 868 pages, english
ISBN-13: 978-1-4665-7997-2




Highway engineering is the term that replaced the traditional term road engineering used in the past, after the introduction of modern highways. Highway engineering is a vast subject that involves planning, design, construction, maintenance and management of roads, bridges and tunnels for the safe and effective transportation of people and goods.

This book concentrates on design, construction, maintenance and management of pavements for roads/highways. It also includes pavement materials since they are an integral part of pavements. It has been written for graduates, postgraduates as well as practicing engineers and laboratory staff and incorporates the author’s 30 years of involvement in teaching, researching and practicing the subject of highway engineering.

Advancements in pavement materials, design, construction, maintenance and pavement management and the globalisation of the market make it imperative for the highway engineer to be aware of the techniques and standards applied globally.

One of the objectives of the book is to provide integrated information on the abovementioned disciplines of highway engineering.

Another objective is to include in one book both European and American standards and practices (CEN EN, ASTM, AASHTO and Asphalt Institute). This would result in a more useful reference textbook to pavement engineering courses taught in European and American educational establishments.

Another objective of this book is to provide a reference textbook to practicing pavement engineers and materials testing laboratory staff, working in countries employing European or American standards and techniques.

Apart from information regarding European and American practices, the reader can also find some specific information on practices employed in countries such as the United Kingdom, France and Greece, as well as Australia.

In addition, this book also aims to provide integrated information related to pavement materials (soil, aggregates, bitumen, asphalts and reclaimed material), material testing for acceptability and quality assurance, asphalt mix design, flexible and rigid pavement design, construction, maintenance and strengthening procedures, quality control of production and acceptance of asphalts, pavement evaluation, asphalt plants and pavement recycling. It also covers the basic principles of pavement management.

The book in its 18 chapters contains many tables, graphs, charts and photographs to assist the reader in learning and understanding the subject of pavement engineering and materials. It also contains a great number of references, a valuable tool to help the reader seek more information and enhance his or her knowledge.

The short description of all pavement material testing procedures, required by Europeanand American standards, as well as pavement design and maintenance procedures covered, does not, by any means, substitute or replace the standards and procedures developed by the various organisations and agencies. The reader is advised to always consult the standards or manuals developed when engaged in testing, design, construction or maintenance works.

It is hoped that this textbook will not only contribute to the understanding of the wide and challenging subject of pavement engineering but also enable a more effective and economical design, construction and maintenance of pavements by employing updated standards, practices and techniques.

link.
12 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 30.10.2020 - 10:54
Сообщение #200


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21786
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55406 раз(а)



American Concrete Institute:
Building Code Requirements for Structural Concrete (ACI 318-19)
Commentary on Building Code Requirements for Structural Concrete (ACI 318R-19)


ACI, 2019
pdf, 628 pages, english
ISBN: 978-1-64195-056-5




The ”Building Code Requirements for Structural Concrete” (”Code”) provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code was developed by an ANSI-approved consensus process and addresses structural systems, members, and connections, including cast-in-place, precast, shotcrete, plain, nonprestressed, prestressed, and composite construction. Among the subjects covered are: design and construction for strength, serviceability, and durability; load combinations, load factors, and strength reduction factors; structural analysis methods; deflection limits; mechanical and adhesive anchoring to concrete; development and splicing of reinforcement; construction document information; field inspection and testing; and methods to evaluate the strength of existing structures.

The Code was substantially reorganized and reformatted in 2014, and this Code continues and expands that same organizational philosophy. The principal objectives of the reorganization were to present all design and detailing requirements for structural systems or for individual members in chapters devoted to those individual subjects, and to arrange the chapters in a manner that generally follows the process and chronology of design and construction. Information and procedures that are common to the design of multiple members are located in utility chapters. Additional enhancements implemented in this Code to provide greater clarity and ease of use include the first use of color illustrations and the use of color to help the user navigate the Code and quickly find the information they need. Special thanks to Bentley Systems, Incorporated, for use of their ProConcrete software to produce many of the figures found in the Commentary.

Uses of the Code include adoption by reference in a general building code, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code provisions cannot be included within the Code itself. The Commentary is provided for this purpose.

Some considerations of the committee in developing the Code are discussed in the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.

Keywords: admixtures; aggregates; anchorage (structural); beam-column frame; beams (supports); caissons; cements; cold weather; columns (supports); combined stress; composite construction (concrete to concrete); compressive strength; concrete; construction documents; construction joints; continuity (structural); contraction joints; cover; curing; deep beams; deep foundations; deflections; drilled piers; earthquake-resistant structures; flexural strength; floors; footings; formwork (construction); hot weather; inspection; isolation joints; joints (junctions); joists; lightweight concretes; load tests (structural); loads (forces); mixture proportioning; modulus of elasticity; moments; piles; placing; plain concrete; precast concrete; prestressed concrete; prestressing steels; quality control; reinforced concrete; reinforcing steels; roofs; serviceability; shear strength; shotcrete; spans; splicing; strength analysis; stresses; structural analysis; structural design; structural integrity; structural walls; T-beams; torsion; walls; water; welded wire reinforcement.

link.
8 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение

12 страниц V  « < 8 9 10 11 12 >
Ответить в данную темуНачать новую тему
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 



RSS Текстовая версия Сейчас: 29.03.2024 - 16:28