DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD |
Здравствуйте, гость ( Вход | Регистрация )
Here You Can Support Our Work and .:LavTeaM:. Services |
DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD |
5.04.2016 - 09:02
Сообщение
#501
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21859 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.33 Спасибо сказали: 55907 раз(а) |
DotSoft ToolPac v23.0.0.0
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: https://dotsoft.com/toolpac.htm + = link. 47 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
15.01.2023 - 15:36
Сообщение
#502
|
|
Прохожий Группа: Пользователи Пользователь №: 52766 Сообщений: 40 Регистрация: 21.12.2006 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 3 раз(а) |
|
|
|
15.01.2023 - 23:20
Сообщение
#503
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2969 раз(а) |
Всё прекрасно работает
work_acad2017.jpg ( 218.14 килобайт ) Кол-во скачиваний: 46 Проверьте, что через команду netload в ACAD 2017 загружен именно файл ToolPacAC15.dll Сообщение отредактировал Slinger - 15.01.2023 - 23:29 |
|
|
16.01.2023 - 08:08
Сообщение
#504
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21859 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.33 Спасибо сказали: 55907 раз(а) |
DotSoft ToolPac v22.0.0.1 build 17.11.2022
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 47 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
26.03.2023 - 05:34
Сообщение
#505
|
|
Новичок Группа: Пользователи Пользователь №: 188986 Сообщений: 3 Регистрация: 15.02.2017 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
Please help, i followed the installation instruction but Toolpac not showing in autcocad. anyone can help how to load Toolpac in autocad?
Thank you in advance Edit: oh sorry it is OK now, thank you Сообщение отредактировал 3xhon - 26.03.2023 - 06:23 |
|
|
26.03.2023 - 06:06
Сообщение
#506
|
|
Завсегдатай Группа: Пользователи Пользователь №: 188283 Сообщений: 286 Регистрация: 15.01.2017 Из: australia Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 230 раз(а) |
Maybe try the cuix command to load the ribbon/program.Could be as simple as the program is installed but not showing on the ribbon?
Please help, i followed the installation instruction but Toolpac not showing in autcocad. anyone can help how to load Toolpac in autocad?
Thank you in advance |
|
|
30.04.2023 - 11:11
Сообщение
#507
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2969 раз(а) |
Update 23.0.0.0
» Click to show Spoiler - click again to hide... «
In some reason files ToolPacBC15.dll - ToolPacBC19.dll was been removed Apply new patch
Прикрепленные файлы
|
|
|
30.04.2023 - 17:18
Сообщение
#508
|
|
Из местных Группа: Teamer Пользователь №: 196535 Сообщений: 66 Регистрация: 9.05.2019 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 83 раз(а) |
Hi, Slinger
Is there a way you can get this for us, per the image below, the icon pack is missing.
Прикрепленные файлы
|
|
|
1.05.2023 - 12:18
Сообщение
#509
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2969 раз(а) |
JUSTLearn, hey there
This file doesn't exists. Mean I have no idea what file it is. For me replacing new files works fine. No errors |
|
|
1.05.2023 - 12:24
Сообщение
#510
|
|
Из местных Группа: Teamer Пользователь №: 196535 Сообщений: 66 Регистрация: 9.05.2019 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 83 раз(а) |
Hi Brother Slinger,
Thank you for checking, it also works for me, but I was checking if the file was available, it is just an added value icon changer within toolpack. Thank you again for sharing |
|
|
3.05.2023 - 22:42
Сообщение
#511
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21859 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.33 Спасибо сказали: 55907 раз(а) |
DotSoft ToolPac v23.0.0.0
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: https://dotsoft.com/toolpac.htm + = link. 47 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
4.05.2023 - 12:26
Сообщение
#512
|
|
Новичок Группа: Пользователи Пользователь №: 193299 Сообщений: 3 Регистрация: 30.09.2017 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
I cannot load dll file using NETLOAD (Autocad 2023).
I Receive the following errror: NETLOAD Cannot load assembly. Error details: System.IO.FileLoadException: Could not load file or assembly 'file:///C:\Program Files (x86)\DotSoft\ToolPac\ToolPacAC18.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) File name: 'file:///C:\Program Files (x86)\DotSoft\ToolPac\ToolPacAC18.dll' ---> System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark) at System.Reflection.Assembly.LoadFrom(String assemblyFile) at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName) at loadmgd() Any suggestion? thanks |
|
|
5.05.2023 - 11:27
Сообщение
#513
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2969 раз(а) |
zipangolo2,
Цитата This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. Here is an answer. I'm also recommend check installed version of Microsoft .NET and install most popular version (like 3.5, 4.0, 6.0 etc) |
|
|
20.05.2023 - 08:57
Сообщение
#514
|
|
Новичок Группа: Пользователи Пользователь №: 131174 Сообщений: 8 Регистрация: 27.01.2010 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 3 раз(а) |
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Netload-error-when-trying-to-load-the-DGN-Hotfix-files-in-AutoCAD.html
Add the following lines to the acad.exe.config file found in C:\Program Files\Autodesk\<Product version> <runtime> <loadFromRemoteSources enabled="true" /> </runtime> I cannot load dll file using NETLOAD (Autocad 2023). I Receive the following errror: NETLOAD Cannot load assembly. Error details: System.IO.FileLoadException: Could not load file or assembly 'file:///C:\Program Files (x86)\DotSoft\ToolPac\ToolPacAC18.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) File name: 'file:///C:\Program Files (x86)\DotSoft\ToolPac\ToolPacAC18.dll' ---> System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark) at System.Reflection.Assembly.LoadFrom(String assemblyFile) at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName) at loadmgd() Any suggestion? thanks |
|
|
22.01.2024 - 07:26
Сообщение
#515
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21859 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.33 Спасибо сказали: 55907 раз(а) |
For previous version here it is another solution.
Just copy applied license file to: C:\Program Files (x86)\DotSoft\Toolpac\ No patch needed. All credits goes to raduga_fb
Прикрепленные файлы
|
|
|
3.04.2024 - 09:48
Сообщение
#516
|
|
Новичок Группа: Пользователи Пользователь №: 149989 Сообщений: 4 Регистрация: 16.11.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
Ссылка не рабочая, исправьте пожалуйста
|
|
|
3.04.2024 - 09:50
Сообщение
#517
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21859 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.33 Спасибо сказали: 55907 раз(а) |
i77artur, ищите тут
|
|
|
13.04.2024 - 11:39
Сообщение
#518
|
|
Прохожий Группа: Пользователи Пользователь №: 185790 Сообщений: 26 Регистрация: 17.09.2016 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 7 раз(а) |
версия 23 ... делайте выводы сами
______________2024_04_13_113616.png ( 121.73 килобайт )
Кол-во скачиваний: 52
|
|
|
Текстовая версия | Сейчас: 25.04.2024 - 20:28 |