IPB

Здравствуйте, гость ( Вход | Регистрация )

История благодарностей участнику ssf86 ::: Спасибо сказали: 190 раз(а)
Дата поста: В теме: За сообщение: Спасибо сказали:
7.11.2018 - 21:06 Cadaplus APLUS v18.034
loshlosh,

I will work on it on weekend.

Thanks
Angy, loshlosh, luser, tanbqtb03, Trog1,
19.04.2018 - 15:26 TSVTECH PipeFitPro 2015, 2016, 2018
Pipefitpro 2018 version released.

Keygen almost same but a bit user friendly.

Download and extract the rar file.

Load the PFPKEY.VLX file and run the command PFPKEY.

Follow instructions.

[attachment=21822:PFPKEY.rar]
2ak2, Angy, ioncube, istigatore, noni, REZAVARNASSERI, Toren, Williams,
19.04.2018 - 14:35 Cadaplus APLUS v18.034
Whoever is getting the error "no function definition A+APLUSINIT" or something similar, make sure the Aplus.vlx file is loaded before you load the "APLKEY XX.XXX.vlx" file.

APLKEY is made up to pull the commands and functions present inside the original program file called "Aplus.vlx".

1. Load APlus.vlx file & close the dialog box. Menus etc will be loaded.
2. Load the APLKEY XX.XXX.vlx file and then run the command "APLKEY".

Hope this helps.
2ak2, kokoola, Williams,
19.04.2018 - 14:28 ASVIC Mech-Q Full Suite v4.14.004 for AutoCAD 2000-2019
New Version of Mech-Q released for AutoCAD 2019.

Tested the Old keygen & it still works perfectly. smile.gif

hxxps://www.asvic.com.au/Download-MechQ/
2ak2, Angy, kikoko, REZAVARNASSERI,
18.04.2018 - 12:40 Cadaplus APLUS v18.034
Hello All,

Medicine for APLUS 18.034.

Tested in AutoCAD Mechanical 2015.

Steps to follow:

1. Install APLUS and Open AutoCAD.

2. Download APLKEY 18.034.rar and extract.

3. Load APLKEY 18.034.VLX file and Run the Command APLKEY.

4. Copy the Bytes which is pasted in commandline.

5. Close AutoCAD.

6. Delete the XXXXX_Trial.lic file. (Optional)

7. Open the aplus.vlx file in HEX Editor.

8. Search for the Sequence of bytes 33 15 A8 B5 and replace to the Bytes copied from commandline (see instruction no. 4).

9. Search for the sequence of bytes 65 2B 3B 50 BF D9 31 DB 61 32 6B 73 2C & Replace it to 4C 2D 27 09 E7 97 1C 9A 47 29 62 73 2A

10. Save the edited Aplus.vlx file and replace it in the APLUS directory.

11. Restart AutoCAD.

12. If not working, Type APPLOAD go to "Contents" under Startup Suite and remove aplus.vlx and then re-add the aplus.vlx (edited one).

13. Restart AutoCAD again.

Download latest version here: hxxps://www.4shared.com/file/T4V0FgCPca/aplus.html

[attachment=21817:APLKEY_18.034.rar]

CODE
                                                          --
***********************************************      --  APLUS  --
**   Commands APLUS are currently loaded     **   -------------------
**         ©Copyright APLUS SA               **    -- -- -- -- -- --
**              nr lic:XXX XXXXXX            **    || || || || || ||
**   For more commands: aplus@cadaplus.com   **    || || || || || ||
***********************************************    || || || || || ||
APLUS v18.034 registered to: ssf86 Lavteam         -------------------
2ak2, Angy, cadcamcae, istigatore, Williams,
17.04.2018 - 13:22 Cadaplus APLUS v18.034
Everything is working for me. See below.

CODE
***********************************************      --  APLUS  --
**   Commands APLUS are currently loaded     **   -------------------
**         ©Copyright APLUS SA               **    -- -- -- -- -- --
**              nr lic:XXX XXXXXX            **    || || || || || ||
**   For more commands: aplus@cadaplus.com   **    || || || || || ||
***********************************************    || || || || || ||
APLUS v17.024 registered to: Thanks to Lavteam     -------------------


However I have removed the method of checking the date from the internet and updated the Keygen. See attached. Try with this and let me know (it should work).

[attachment=21813:APLKEY_17.024.rar]

Hope this helps.
2ak2, neboja, tanbqtb03, Williams,
12.09.2017 - 09:50 SmartDraft productivity tools for Civil
Keygen is ready. PM me if needed.
Angy, Slinger,
9.06.2017 - 13:28 SmartDraft productivity tools for Civil
Good Software. Will try to cure it.
Angy, loshlosh, moraxas, thy,
2.03.2017 - 09:17 Cadaplus APLUS v18.034
QUOTE (2ak2 @ 2.03.2017 - 01:00) *
<!--private_data=0-->


2ak2,

I understand your concern but the Internet connection requires only to get the server time which is necessary to calculate the KEY.

Even if you do not apply medicine you will have to have a connection to get the server time (this is to check the remaining trial days).

Thanks

PS: Once the Step 3 is done, Internet has nothing to do ahead (Have it or Disconnect).
2ak2,
1.03.2017 - 13:24 Cadaplus APLUS v18.034
OK

So here is the Medicine for APLUS 17.024.

Tested in AutoCAD Mechanical 2015.

Steps to follow:

1. Install APLUS and Open AutoCAD.

2. Download APLKEY 17.024.rar and extract.

3. Load APLKEY 17.024.VLX file and Run the Command APLKEY. (Note Internet connection require)

4. Copy the Bytes which is pasted in commandline.

5. Close AutoCAD.

6. Delete the XXXXX_Trial.lic file. (Optional)

7. Open the aplus.vlx file in HEX Editor.

8. Search for the Sequence of bytes 51 0D D6 43 and replace to the Bytes copied from commandline (see instruction no. 4).

9. Search for the sequence of bytes 26 3E 87 52 34 69 32 14 7F 31 6B 7E 6B 6E 71 03 5A & Replace it to 3F 37 94 5F 36 74 32 33 7B 63 5D 66 6D 79 6E 03 5C

10. Save the edited Aplus.vlx file and replace it in the APLUS directory.

11. Restart AutoCAD.

12. If not working, Type APPLOAD go to "Contents" under Startup Suite and remove aplus.vlx and then re-add the aplus.vlx (edited one).

13. Restart AutoCAD again.

PS: To download latest version go here: hxxp://www.cadaplus.com/files/aplus.exe

Thanks

[attachment=20115:APLKEY_17.024.rar]
2ak2, Angy, dizz, German999, istigatore, loshlosh, luser, noni, olega16, steptoe, tanbqtb03, Williams, Yap_yx, YaqubMughal,
27.02.2017 - 19:21 Cadaplus APLUS v18.034
Thanks Istigatore for your compliments. I have also made the working version of 17.024 the Latest version but need time to write explaination post. Soon I will do that.

Thanks
Angy, German999, istigatore, noni, olega16, tanbqtb03, Williams,
24.02.2017 - 16:25 Cadaplus APLUS v18.034
Ok So the user from the list I have selected to replace with our info has his license upto 20140930 or something. Even after you apply the 17.024 medicine it will not work because the license is expired.

We have to do one more step to change the date to 21000101.

I will do this on monday and will post.

Thanks
2ak2, Angy, dizz, olega16, tanbqtb03, Williams,
24.02.2017 - 15:31 Cadaplus APLUS v18.034
Probably try this. Not tested.

For Version 17.024

Few instructions changes. Rest are same

2. Download APLKEY 17.024.rar and extract.

8. Search for the Sequence of bytes 15 85 60 0E and replace to the Bytes copied from commandline (see instruction no. 3).

9. Search for the sequence of bytes 0D 6F 73 2A 34 15 64 27 53 62 65 05 11 92 92 8C 5F & Replace it to 09 6F 73 29 7F 30 31 73 74 2D 47 03 47 AA 9E 83 5A

I doubt there could be License upgrade error if you already licensed the previous version.

Please check and report

[attachment=20088:APLKEY_17.024.rar]
kikoko, Williams,
24.02.2017 - 12:03 Cadaplus APLUS v18.034
Friends,

Finally I have manged to get some time to work on it. Here is the medicine for APLUS.

Tested in AutoCAD Mechanical 2015.

Steps to follow:

1. Install APLUS and Open AutoCAD.

2. Download APLKEY.rar and extract.

3. Load APLKEY.VLX file and Run the Command APLKEY. (Note Internet connection require)

4. Copy the Bytes which is pasted in commandline.

5. Close AutoCAD.

6. Delete the XXXXX_Trial.lic file. (Optional)

7. Open the aplus.vlx file in HEX Editor.

8. Search for the Sequence of bytes 00 D9 79 46 and replace to the Bytes copied from commandline (see instruction no. 3).

9. Search for the sequence of bytes 17 7C 22 7C 27 4D 78 2B 2A 5E 1F 07 82 F5 48 41 0F & Replace it to 13 7C 22 7F 6C 68 2D 7F 0D 11 3D 01 D4 CD 44 4E 0A

10. Save the edited Aplus.vlx file and replace it in the APLUS directory.

11. Restart AutoCAD.

12. If not working, Type APPLOAD go to "Contents" under Startup Suite and remove aplus.vlx and then re-add the aplus.vlx (edited one).

13. Restart AutoCAD again.

14. Any error please report.

15. Start Learning APLUS.

Special Thanks to Slinger for helping personally.

[attachment=20084:APLKEY.rar]
Angy, istigatore, luser, noni, Slinger, Williams,
2.06.2016 - 05:27 TSVTECH PipeFitPro 2015, 2016, 2018
I tried in my system. Windows 10 x64 AutoCAD 2016 Mechanical. Everything just works great. License active etc.

Anyways Its just a notation that you are facing but I believe that there will be no problem in working with the program.

The Key which keygen outputs is the one that program requires. Hence its totally fine.

I would request others to please see if they also find the same notation or what?

BR
2ak2, REZAVARNASSERI, tanbqtb03,
1.06.2016 - 19:18 TSVTECH PipeFitPro 2015, 2016, 2018
QUOTE (2ak2 @ 1.06.2016 - 20:41) *
<!--private_data=0-->


Can you please try with this one? Hope this one removes trial license notation. However the program will work fine.

[attachment=19047:PipeFitP...5_Keygen.rar]

BR
2ak2, Angy, camiqmex, istigatore, tanbqtb03,
1.06.2016 - 01:21 ASVIC Mech-Q Full Suite v4.14.004 for AutoCAD 2000-2019
hxxp://cadavenue.com/get-dloads
Bipsi, omariana, steptoe,
1.06.2016 - 00:57 TSVTECH PipeFitPro 2015, 2016, 2018
Sorry it was my mistake I forgot to mention the command name. Type PFPKEY in the commandline after you load the file in AutoCAD. Please report after you test it.

BR
2ak2, REZAVARNASSERI,
31.05.2016 - 12:42 Cadaplus APLUS v18.034
I will work on it in free time.

Thanks
cadcamcae, luser, olega16, Yap_yx,
31.05.2016 - 10:48 TSVTECH PipeFitPro 2015, 2016, 2018
New Version Released. Hence a little update in the Medicine.

Same instruction to use as before.

Please try and reply if it works OK.

Note: Tested in AutoCAD 2015 and 2016 Mechanical. Hope this helps.

[attachment=19037:PipeFitP...5_Keygen.rar]
2ak2, ailuros, knight282009, REZAVARNASSERI,
31.05.2016 - 06:29 ASVIC Mech-Q Full Suite v4.14.004 for AutoCAD 2000-2019
Dear All,

Here is the keygen posted openly. No more PMs now.

1, Download and Extract the zipped file.
2, Load the file (Mech_Qv4_Keygen.fas) in AutoCAD.
3, Run the command MQKEY and input the serial number.
4, You activation key will be printed in commandline. Just copy and paste it in the Authorisation Dialog box.
5, Enjoy the software.

[attachment=19034:Mech_Q_v4_Keygen.zip]
2ak2, ailuros, alan_loy5, Angy, Bipsi, cadcamcae, cilemac, domodong, istigatore, noinski, omariana, REZAVARNASSERI, s-konstruktor, softwareka, steptoe, tanbqtb03, tvpe, Williams,
30.05.2016 - 12:33 ASVIC Mech-Q Full Suite v4.14.004 for AutoCAD 2000-2019
Done. Tested in AutoCAD 2015 Mechanical.
Thanks
REZAVARNASSERI, tomce,
28.05.2016 - 09:02 ASVIC Mech-Q Full Suite v4.14.004 for AutoCAD 2000-2019
Soon uploading a medicine (Mech-Q for AutoCAD) with all modules activated. No time to test right now, possibly on monday will test and share.

Free for All

Cheers.
2ak2, cadcamcae, noni, tanbqtb03,
24.12.2014 - 12:18 Triangulation for AutoCAD
Hello All,

Join the request please.

Program Name: Triangulation for AutoCAD.

An application for AUTOCAD 2002-2015, which makes the triangulation of a set of POINT entities, the intersection curves (isolines) between a set of 3DFACE entities and a set of equidistance plans, horizontally or vertically and calculates the volume and center of gravity of a set of bodies or between surfaces composed of 3DFACE entities. The triangulation is performed on a convex hull of a set of points. You can triangulate million of points in a few minutes! The isolines can be interpolated and their colors are according to a drawn legend. The isolines having Z a multiple of a value will be drawn thickened. You can define a clipping parallelepiped for isolines. You can load and draw a XYZ file of points having the format: Number X Y Z Code. The drawing is made with POINT, 3DPOLY, SPLINE or BLOCK entities, according to a modifiable library of codes. You can also make the projection over a triangulation of a 2D POLYLINE and generate cross sections and a longitudinal profile corresponding at projection. The POLYLINE may contain arcs. Color-filled contour maps can be also generated.

Website : hxxp://rcad.eu/triangulation-autocad/












I have the Source code of the VLX file. But Unable to remove the limitation from a_triangr.exe file. If anyone need source code of Lisp Please ask but Please help to remove Triangle Limitations!!!

Any medicine Please.
GeoHint,
17.08.2013 - 18:19 Autolisp for heat exchanger drawing
if you notice the sentence in dialog box something like "You cannot edit values in demo version".
After applying the patch it will not show at all.
i have not checked the program in depth.
tanbqtb03,

2 страниц V   1 2 >
RSS Текстовая версия Сейчас: 17.11.2018 - 17:03