IPB

Здравствуйте, гость ( Вход | Регистрация )

DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD
Williams
сообщение 5.04.2016 - 09:02
Сообщение #501


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21746
Регистрация: 1.08.2003
Из: Москва
Загружено: 1.2 TB
Скачано: 360.63 мегабайт
Коэффициент: 3,489.26
Спасибо сказали: 55194 раз(а)



DotSoft ToolPac v23.0.0.0



In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing.

If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time.

ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design.

More info: https://dotsoft.com/toolpac.htm

+ = link.
47 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
26 страниц V  « < 24 25 26  
Начать новую тему
Ответов
Horek
сообщение 15.01.2023 - 15:36
Сообщение #502


Прохожий
Иконка группы

Группа: Пользователи
Пользователь №: 52766
Сообщений: 40
Регистрация: 21.12.2006
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 3 раз(а)



Цитата(Slinger @ 14.01.2023 - 22:10) *
Horek, Какая версия автокада?

Autocad 2017
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Slinger
сообщение 15.01.2023 - 23:20
Сообщение #503


Активный пользователь
Иконка группы

Группа: Модераторы
Пользователь №: 143610
Сообщений: 941
Регистрация: 7.03.2011
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 2827 раз(а)



Всё прекрасно работает

Прикрепленный файл  work_acad2017.jpg ( 218.14 килобайт ) Кол-во скачиваний: 40


Проверьте, что через команду netload в ACAD 2017 загружен именно файл ToolPacAC15.dll

Сообщение отредактировал Slinger - 15.01.2023 - 23:29
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 16.01.2023 - 08:08
Сообщение #504


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21746
Регистрация: 1.08.2003
Из: Москва
Загружено: 1.2 TB
Скачано: 360.63 мегабайт
Коэффициент: 3,489.26
Спасибо сказали: 55194 раз(а)



DotSoft ToolPac v22.0.0.1 build 17.11.2022



In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing.

If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time.

ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design.

More info: http://dotsoft.com/toolpac.htm

+ = link.
47 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
3xhon
сообщение 26.03.2023 - 05:34
Сообщение #505


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 188986
Сообщений: 3
Регистрация: 15.02.2017
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 0 раз(а)



Please help, i followed the installation instruction but Toolpac not showing in autcocad. anyone can help how to load Toolpac in autocad?
Thank you in advance

Edit: oh sorry it is OK now, thank you biggrin.gif


Сообщение отредактировал 3xhon - 26.03.2023 - 06:23
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Azza_b
сообщение 26.03.2023 - 06:06
Сообщение #506


Завсегдатай
Иконка группы

Группа: Пользователи
Пользователь №: 188283
Сообщений: 279
Регистрация: 15.01.2017
Из: australia
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 214 раз(а)



Maybe try the cuix command to load the ribbon/program.Could be as simple as the program is installed but not showing on the ribbon?

QUOTE (3xhon @ 26.03.2023 - 11:34) *
Please help, i followed the installation instruction but Toolpac not showing in autcocad. anyone can help how to load Toolpac in autocad?
Thank you in advance
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Slinger
сообщение 30.04.2023 - 11:11
Сообщение #507


Активный пользователь
Иконка группы

Группа: Модераторы
Пользователь №: 143610
Сообщений: 941
Регистрация: 7.03.2011
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 2827 раз(а)



Update 23.0.0.0

» Click to show Spoiler - click again to hide... «
https://www.mediafire.com/file/xnel0caz1dy3dlz/update_23.0.0.0.rar/file


In some reason files ToolPacBC15.dll - ToolPacBC19.dll was been removed

Apply new patch
Прикрепленные файлы
Прикрепленный файл  dotsoft.toolpac.23.0.0.0_patch.rar ( 423.89 килобайт ) Кол-во скачиваний: 59
 
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
JUSTLearn
сообщение 30.04.2023 - 17:18
Сообщение #508


Из местных
Иконка группы

Группа: Teamer
Пользователь №: 196535
Сообщений: 66
Регистрация: 9.05.2019
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 83 раз(а)



Hi, Slinger

Is there a way you can get this for us, per the image below, the icon pack is missing.



Прикрепленные файлы
Прикрепленный файл  TP.png ( 15.04 килобайт ) Кол-во скачиваний: 23
 
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Slinger
сообщение 1.05.2023 - 12:18
Сообщение #509


Активный пользователь
Иконка группы

Группа: Модераторы
Пользователь №: 143610
Сообщений: 941
Регистрация: 7.03.2011
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 2827 раз(а)



JUSTLearn, hey there

This file doesn't exists. Mean I have no idea what file it is. For me replacing new files works fine. No errors
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
JUSTLearn
сообщение 1.05.2023 - 12:24
Сообщение #510


Из местных
Иконка группы

Группа: Teamer
Пользователь №: 196535
Сообщений: 66
Регистрация: 9.05.2019
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 83 раз(а)



Hi Brother Slinger,

Thank you for checking, it also works for me, but I was checking if the file was available, it is just an added value icon changer within toolpack.

Thank you again for sharing

Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 3.05.2023 - 22:42
Сообщение #511


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21746
Регистрация: 1.08.2003
Из: Москва
Загружено: 1.2 TB
Скачано: 360.63 мегабайт
Коэффициент: 3,489.26
Спасибо сказали: 55194 раз(а)



DotSoft ToolPac v23.0.0.0



In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing.

If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time.

ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design.

More info: https://dotsoft.com/toolpac.htm

+ = link.
47 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
zipangolo2
сообщение 4.05.2023 - 12:26
Сообщение #512


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 193299
Сообщений: 3
Регистрация: 30.09.2017
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 0 раз(а)



I cannot load dll file using NETLOAD (Autocad 2023).
I Receive the following errror:

NETLOAD
Cannot load assembly. Error details: System.IO.FileLoadException: Could not load file or assembly 'file:///C:\Program Files (x86)\DotSoft\ToolPac\ToolPacAC18.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)
File name: 'file:///C:\Program Files (x86)\DotSoft\ToolPac\ToolPacAC18.dll' ---> System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.
at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()

Any suggestion?
thanks
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Slinger
сообщение 5.05.2023 - 11:27
Сообщение #513


Активный пользователь
Иконка группы

Группа: Модераторы
Пользователь №: 143610
Сообщений: 941
Регистрация: 7.03.2011
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 2827 раз(а)



zipangolo2,

Цитата
This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.


Here is an answer. I'm also recommend check installed version of Microsoft .NET and install most popular version (like 3.5, 4.0, 6.0 etc)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
toforgive
сообщение 20.05.2023 - 08:57
Сообщение #514


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 131174
Сообщений: 8
Регистрация: 27.01.2010
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 3 раз(а)



https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Netload-error-when-trying-to-load-the-DGN-Hotfix-files-in-AutoCAD.html

Add the following lines to the acad.exe.config file found in C:\Program Files\Autodesk\<Product version>
<runtime>
<loadFromRemoteSources enabled="true" />
</runtime>



QUOTE (zipangolo2 @ 4.05.2023 - 12:26) *
I cannot load dll file using NETLOAD (Autocad 2023).
I Receive the following errror:

NETLOAD
Cannot load assembly. Error details: System.IO.FileLoadException: Could not load file or assembly 'file:///C:\Program Files (x86)\DotSoft\ToolPac\ToolPacAC18.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)
File name: 'file:///C:\Program Files (x86)\DotSoft\ToolPac\ToolPacAC18.dll' ---> System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.
at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()

Any suggestion?
thanks

Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 22.01.2024 - 07:26
Сообщение #515


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21746
Регистрация: 1.08.2003
Из: Москва
Загружено: 1.2 TB
Скачано: 360.63 мегабайт
Коэффициент: 3,489.26
Спасибо сказали: 55194 раз(а)



For previous version here it is another solution.
Just copy applied license file to:
C:\Program Files (x86)\DotSoft\Toolpac\
No patch needed.
All credits goes to raduga_fb
Прикрепленные файлы
Прикрепленный файл  Toolpac.rar ( 443 байт ) Кол-во скачиваний: 57
 
Перейти в начало страницы
Вставить ник
+Цитировать сообщение

26 страниц V  « < 24 25 26
Ответить в данную темуНачать новую тему
2 чел. читают эту тему (гостей: 2, скрытых пользователей: 0)
Пользователей: 0

 



RSS Текстовая версия Сейчас: 19.03.2024 - 05:18