DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD |
Здравствуйте, гость ( Вход | Регистрация )
Here You Can Support Our Work and .:LavTeaM:. Services |
DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD |
5.04.2016 - 09:02
Сообщение
#461
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21859 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.33 Спасибо сказали: 55899 раз(а) |
DotSoft ToolPac v23.0.0.0
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: https://dotsoft.com/toolpac.htm + = link. 47 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
3.10.2020 - 08:46
Сообщение
#462
|
|
Живущий здесь Группа: Модераторы Пользователь №: 154947 Сообщений: 2215 Регистрация: 17.07.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 3300 раз(а) |
Your Nitroflare link is bad.
|
|
|
3.10.2020 - 09:03
Сообщение
#463
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2968 раз(а) |
santorini, wrong. For me it works fine.
|
|
|
3.10.2020 - 09:55
Сообщение
#464
|
|
Живущий здесь Группа: Модераторы Пользователь №: 154947 Сообщений: 2215 Регистрация: 17.07.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 3300 раз(а) |
Look. I have a premium account in Nitroflare and I can download dozens of GB every day (sometimes I do).
All I can see is an empty page with the link. Succeeded by pressing Alt and Enter but is the first time I have a problem in Nitroflare after years. |
|
|
3.10.2020 - 10:19
Сообщение
#465
|
|
Из местных Группа: Пользователи Пользователь №: 112857 Сообщений: 52 Регистрация: 11.04.2009 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 13 раз(а) |
santorini
update_20.0.0.2.rar, 13.3 MB https://mega.nz/file/7M1AhRpB#sOJSMNAEUljtWS37Df3e1NZ3MP1yOQNFZ3V8RT5-WZI |
|
|
30.10.2020 - 22:47
Сообщение
#466
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2968 раз(а) |
20.0.0.3
» Click to show Spoiler - click again to hide... «
New patch. Added support for BricsCAD 21 01.11.2020: Links to 20.0.0.3 is updated. Now it's correct names with .dll Сообщение отредактировал Slinger - 1.11.2020 - 10:09
Прикрепленные файлы
|
|
|
31.10.2020 - 11:19
Сообщение
#467
|
|
Завсегдатай Группа: Пользователи Пользователь №: 13236 Сообщений: 254 Регистрация: 4.04.2005 Из: Монино Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 19 раз(а) |
20.0.0.3 » Click to show Spoiler - click again to hide... «
New patch. Added support for BricsCAD 21 После обновления пишет старую версию?
Прикрепленные файлы
|
|
|
1.11.2020 - 10:11
Сообщение
#468
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2968 раз(а) |
|
|
|
13.11.2020 - 13:58
Сообщение
#469
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21859 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.33 Спасибо сказали: 55899 раз(а) |
DotSoft ToolPac v20.0.0.3
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 61 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
20.01.2021 - 15:21
Сообщение
#470
|
|
Прохожий Группа: Пользователи Пользователь №: 93768 Сообщений: 40 Регистрация: 13.08.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 22 раз(а) |
как вытащить\сделать меню?
up. как оказалось надо выгрузить меню и загрузить заново командой _menuload Сообщение отредактировал solar - 20.01.2021 - 15:35 |
|
|
20.01.2021 - 22:04
Сообщение
#471
|
|
Живущий здесь Группа: Админы Пользователь №: 97235 Сообщений: 6682 Регистрация: 6.10.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 7675 раз(а) |
solar,
Приватный текст
Написать 10 сообщений (10 осталось)
|
|
|
31.03.2021 - 22:59
Сообщение
#472
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2968 раз(а) |
Update 21.0.0.0
I'm not tested it with ACAD 2022. And I'm still not have full installer for Toolpac, direct link. So here just update. Install it above version 19 installer » Click to show Spoiler - click again to hide... «
Apply patch Сообщение отредактировал Slinger - 31.03.2021 - 23:00
Прикрепленные файлы
|
|
|
31.03.2021 - 23:33
Сообщение
#473
|
|
Живущий здесь Группа: Админы Пользователь №: 97235 Сообщений: 6682 Регистрация: 6.10.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 7675 раз(а) |
Slinger,
Приватный текст
Написать 10 сообщений (10 осталось)
|
|
|
1.04.2021 - 08:18
Сообщение
#474
|
|
Завсегдатай Группа: Пользователи Пользователь №: 13236 Сообщений: 254 Регистрация: 4.04.2005 Из: Монино Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 19 раз(а) |
Slinger, у меня после установки обновления и патча не работает приложение.
|
|
|
1.04.2021 - 09:27
Сообщение
#475
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2968 раз(а) |
gest, Очень жаль
|
|
|
1.04.2021 - 14:27
Сообщение
#476
|
|
Завсегдатай Группа: Пользователи Пользователь №: 13236 Сообщений: 254 Регистрация: 4.04.2005 Из: Монино Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 19 раз(а) |
Slinger, Переустановил по новому, заменил файлы, пропатчил, сделал загрузку Netload, все равно не загрузилось.
|
|
|
9.04.2021 - 13:29
Сообщение
#477
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21859 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.33 Спасибо сказали: 55899 раз(а) |
DotSoft ToolPac v21.0.0.0
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 35 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
11.05.2021 - 05:46
Сообщение
#478
|
|
Новичок Группа: Пользователи Пользователь №: 94645 Сообщений: 10 Регистрация: 1.09.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
ToolPac 20.0.0.3.
Перевел имена в меню (в меру своих знаний). Может кто-то продолжит? Отправлю на mail. Может дистр. выложить? Неужели никому не интересно? Или все стали англоязычными? Сообщение отредактировал Палыч1964 - 14.05.2021 - 11:53
Прикрепленные файлы
|
|
|
15.05.2021 - 21:10
Сообщение
#479
|
|
Из местных Группа: Пользователи Пользователь №: 169711 Сообщений: 53 Регистрация: 23.06.2014 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 1 раз(а) |
Пожалуйста помоги,
Когда я пытаюсь открыть файл облака точек, я получаю ошибку: Application does not support just-in-time (JIT) debugging. See the end of this message for details. ************** Exception Text ************** System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index at System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource) at System.Collections.Generic.List`1.get_Item(Int32 index) at ToolPac.MeshFile.Import(String FilNam) at ToolPac.MesCmdUtils.ImportFile() at ToolPac.AppCommands.SurMesImp() at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorker(MethodInfo mi, Object commandObject, Boolean bLispFunction) at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorkerWithExceptionFilter(MethodInfo mi, Object commandObject, Boolean bLispFunction) at Autodesk.AutoCAD.Runtime.CommandClass.CommandThunk.Invoke() |
|
|
16.05.2021 - 04:11
Сообщение
#480
|
|
Новичок Группа: Пользователи Пользователь №: 94645 Сообщений: 10 Регистрация: 1.09.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
Что за "файл облака точек"?
Это обычный упакованный файл меню. Скачай, распакуй, загружай в Акад. Какой Акад, ToolPac установлены кстати? А кому просьба то адресована? Сообщение отредактировал Палыч1964 - 16.05.2021 - 04:21 |
|
|
16.08.2021 - 02:14
Сообщение
#481
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2968 раз(а) |
Update 21.0.0.0. Still same verion but all files has been updated. Use crk from post 475
» Click to show Spoiler - click again to hide... «
|
|
|
Текстовая версия | Сейчас: 25.04.2024 - 11:59 |