DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD Опции

[Williams]

DotSoft ToolPac v23.0.0.0



In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing.

If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time.

ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design.

More info: https://dotsoft.com/toolpac.htm

+ = link.
47 Mb (RAR5, incl. 3% - info for restoration purpose)

[santorini]

Your Nitroflare link is bad.

[Slinger]

santorini, wrong. For me it works fine.

[santorini]

Look. I have a premium account in Nitroflare and I can download dozens of GB every day (sometimes I do).
All I can see is an empty page with the link.
Succeeded by pressing Alt and Enter but is the first time I have a problem in Nitroflare after years.

[pleXcur]

santorini

update_20.0.0.2.rar, 13.3 MB
https://mega.nz/file/7M1AhRpB#sOJSMNAEUljtWS37Df3e1NZ3MP1yOQNFZ3V8RT5-WZI

[Slinger]

20.0.0.3

» Click to show Spoiler - click again to hide... «

http://nitroflare.com/view/194DB8F0F0F9A1F/update_20.0.0.3.rar

New patch. Added support for BricsCAD 21

01.11.2020: Links to 20.0.0.3 is updated. Now it's correct names with .dll

Сообщение отредактировал Slinger - 1.11.2020 - 10:09

Прикрепленные файлы

 dotsoft.toolpac.20.0_patch.rar ( 432.53 килобайт ) Кол-во скачиваний: 81

 

[gest]

20.0.0.3

» Click to show Spoiler - click again to hide... «

http://nitroflare.com/view/067D78E466B4EA8/update_20.0.0.3.rar

New patch. Added support for BricsCAD 21

После обновления пишет старую версию?

Прикрепленные файлы

 2020_10_31_122153.png ( 16.37 килобайт ) Кол-во скачиваний: 3

 

[Slinger]

gest,

» Click to show Spoiler - click again to hide... «

1) перекачайте обновление заново. Ссылка обновлена
2) Старое обновление 20.0.0.3 можно удалить
3) Удалите все dll файлы из папки, куда установлен Toolpac, которые начинаются на toolpac*. Например, toolpac18a.dll
4) скопируйте заново все файлы из папки update в папку с установленным Toolpac и примените патч по ссылке выше

[Williams]

DotSoft ToolPac v20.0.0.3



In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing.

If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time.

ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design.

More info: http://dotsoft.com/toolpac.htm

+ = link.
61 Mb (RAR5, incl. 3% - info for restoration purpose)

[solar]

как вытащить\сделать меню?
up. как оказалось надо выгрузить меню и загрузить заново командой _menuload

Сообщение отредактировал solar - 20.01.2021 - 15:35

[istigatore]

solar,

Написать 10 сообщений (10 осталось)

[Slinger]

Update 21.0.0.0

I'm not tested it with ACAD 2022. And I'm still not have full installer for Toolpac, direct link. So here just update. Install it above version 19 installer

» Click to show Spoiler - click again to hide... «

https://nitroflare.com/view/2F045FCA05A6C59/update_21.0.0.0.rar

Apply patch

Сообщение отредактировал Slinger - 31.03.2021 - 23:00

Прикрепленные файлы

 dotsoft.toolpac.21.0_patch.rar ( 432.53 килобайт ) Кол-во скачиваний: 87

 

[istigatore]

Slinger,

Написать 10 сообщений (10 осталось)

[gest]

Slinger, у меня после установки обновления и патча не работает приложение.

[Slinger]

gest, Очень жаль

[gest]

Slinger, Переустановил по новому, заменил файлы, пропатчил, сделал загрузку Netload, все равно не загрузилось.

[Williams]

DotSoft ToolPac v21.0.0.0



In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing.

If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time.

ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design.

More info: http://dotsoft.com/toolpac.htm

+ = link.
35 Mb (RAR5, incl. 3% - info for restoration purpose)

[Палыч1964]

ToolPac 20.0.0.3.
Перевел имена в меню (в меру своих знаний). Может кто-то продолжит? Отправлю на mail.
Может дистр. выложить? Неужели никому не интересно? Или все стали англоязычными?

Сообщение отредактировал Палыч1964 - 14.05.2021 - 11:53

Прикрепленные файлы

 toolpac.rar ( 358.83 килобайт ) Кол-во скачиваний: 33

 

[Владан]

Пожалуйста помоги,
Когда я пытаюсь открыть файл облака точек, я получаю ошибку:

Application does not support just-in-time (JIT)
debugging. See the end of this message for details.

************** Exception Text **************
System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
at System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource)
at System.Collections.Generic.List`1.get_Item(Int32 index)
at ToolPac.MeshFile.Import(String FilNam)
at ToolPac.MesCmdUtils.ImportFile()
at ToolPac.AppCommands.SurMesImp()
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorker(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorkerWithExceptionFilter(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.CommandThunk.Invoke()

[Палыч1964]

Что за "файл облака точек"?
Это обычный упакованный файл меню. Скачай, распакуй, загружай в Акад.
Какой Акад, ToolPac установлены кстати?
А кому просьба то адресована?

Сообщение отредактировал Палыч1964 - 16.05.2021 - 04:21

[Slinger]

Update 21.0.0.0. Still same verion but all files has been updated. Use crk from post 475

» Click to show Spoiler - click again to hide... «

https://nitro.download/view/F6A74BC6B03BF3F/update_21.0.0.0_august2021.rar