"Обшие" справочники, Технические и инженерные Опции

[istigatore]

Seismic Data Analysis (2 Volumes)
Society Of Exploration Geophysicists | 2001-01-01 | ISBN: 1560800941 | Pages: 2027 | DJVU | 248 MB



Oz Yilmaz has expanded his original volume on processing to include inversion and interpretation of seismic data. In addition to the developments in all aspects of conventional processing, this two-volume set represents a comprehensive and complete coverage of the modern trends in the seismic industry-from time to depth, from 3-D to 4-D, from 4-D to 4-C, and from isotropy to anisotropy.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/45439414/3705509/Yilmaz.Seismic_Data_Analysis_Vol1.djvu.html
http://hotfile.com/dl/45439167/ce12c0f/Yilmaz.Seismic_Data_Analysis_Vol2.djvu.html
or
http://rapidshare.com/files/393002138/Yilmaz.Seismic_Data_Analysis_Vol1.djvu
http://rapidshare.com/files/393000124/Yilmaz.Seismic_Data_Analysis_Vol2.djvu

[istigatore]

Seismic Analysis of Structures
Wiley | 2010 | ISBN: 0470824611 | 464 pages | PDF | 6,4 MB



While numerous books have been written on earthquakes, earthquake resistance design, and seismic analysis and design of structures, none have been tailored for advanced students and practitioners, and those who would like to have most of the important aspects of seismic analysis in one place. With this book, readers will gain proficiencies in the following: fundamentals of seismology that all structural engineers must know
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/43843849/d80d583/0470824611_Seismic.rar.html
or
http://rapidshare.com/files/389612416/0470824611_Seismic.rar

[istigatore]

Reinforced Concrete Design of Tall Buildings
CRC Press | 2009 | ISBN: 143980480X | 1024 pages | PDF | 31,5 MB



The latest building codes, including ASCE/SEI 7-05, IBC-06/09, ACI 318-05/08, and ASCE/SEI 41-06 Recent developments in studies of seismic vulnerability and retrofit design Earthquake hazard mitigation technology, including seismic base isolation, passive energy dissipation, and damping systems Lateral bracing concepts and gravity-resisting systems Performance based design trends Dynamic response spectrum and equivalent lateral load procedures
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/41597795/101afe6/143980480X_Buildings.rar.html
or
http://rapidshare.com/files/384288098/143980480X_Buildings.rar

Examples for the Design of Structural Concrete With Strut-And-Tie Models
Publisher: Amer Concrete Inst | ISBN: 0870310860 | edition 2002 | PDF | 250 pages | 18,1 mb



Examples for the Design of Structural Concrete With Strut-And-Tie Models by Amer Concrete Inst
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/46422162/313ebc5/4320.rar.html
or
http://depositfiles.com/files/a9ek4azkg
or
http://sharingmatrix.com/file/6903659/4320.rar

Сообщение отредактировал istigatore - 4.06.2010 - 17:50

[istigatore]

Buildings for the Performing Arts, Second Edition
Publisher: Architectural Press | ISBN: 0750668350 | edition 2008 | PDF | 296 pages | 15 mb



This superb design and development guide must be essential reading for all design teams involved in the initiation, planning, design and building of facilities for the various performing arts. A detailed analysis of all design and development issues and the relationships with clients and consultants are explored adopting a very discerning approach. The specific studies that follow analyse in a masterly way the critical requirements of the auditorium and platform/stage, support facilities and their relationship, and examine the effects of site conditions, their time scale and financial appraisal.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/30712724/1cd2c89/Buildings_for_the_Performing_Arts.zip.html
or
http://rapidshare.com/files/357477712/Buildings_for_the_Performing_Arts.zip

[istigatore]

Prandtl-Essentials of Fluid Mechanics
Springer | 2009 | ISBN: 144191563X | 796 pages | PDF | 26,1 MB



This book is an update and extension of the classic textbook by Ludwig Prandtl, Essentials of Fluid Mechanics. It is based on the 12th German edition with additional material included. Chapters on wing aerodynamics, heat transfer, and layered flows have been revised and extended, and there are new chapters on fluid mechanical instabilities and biomedical fluid mechanics.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/49234788/c81d782/144191563XPrandtl.rar.html
or
http://rapidshare.com/files/400381739/144191563XPrandtl.rar

Engineering Fluid Mechanics
Publisher: Wiley | ISBN: 0470259779 | edition 2008 | PDF | 592 pages | 47,6 mb



Connecting the math and theory of fluid mechanics to practical applications can be a difficult process. Engineering Fluid Mechanics builds on the success of previous editions to help engineers learn how to apply concepts by keeping them engaged and active throughout the book. Simple and effective examples show how key equations are utilized in practice, and step-by-step descriptions provide details into the processes that engineers follow. Each chapter also outlines the three most important things they will be able to accomplish once the concepts are learned. With its physical/visual approach, engineers will quickly gain an intuitive understanding of the principles.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/30979855/1859387/engineeringmechanics.pdf.html

Fluid Mechanics for Petroleum Engineers
Elsevier Science | English | 1993-03-01 | ISBN: 0444986685 | 412 pages | PDF | 12 MB



Hardbound. Written primarily to provide petroleum engineers with a systematic analytical approach to the solution of fluid flow problems, this book will nevertheless be of interest to geologists, hydrologists, mining-, mechanical-, or civil engineers. It provides the knowledge necessary for petroleum engineers to develop design methods for drilling, production, transport of oil and gas. Basic mechanical laws are applied for perfect fluid flow, Newtonian fluid, non-Newtonian fluid, and multiple phase flows. Elements of gas dynamics, a non-familiar treatment of shock waves, boundary layer theory, and two-phase flow are also included.

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/f2lp8n4ge

Fundamentals of Fluid Mechanics and Transport Phenomena
Wiley-ISTE | 2009 | ISBN: 1848210655 | 512 pages | PDF | 13 MB



This book examines the phenomena of fluid flow and transfer as governed by mechanics and thermodynamics. Part 1 concentrates on equations coming from balance laws and also discusses transportation phenomena and propagation of shock waves. Part 2 explains the basic methods of metrology, signal processing, and system modeling, using a selection of examples of fluid and thermal mechanics.

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/rekt7cok7
or
http://hotfile.com/dl/40742935/c379104/1848210655.rar.html

Сообщение отредактировал istigatore - 18.06.2010 - 21:31

[istigatore]

Rock Quality, Seismic Velocity, Attenuation and Anisotropy
Published by Taylor & Francis | Publication date : October 2006 | ISBN : 0415394414 | PDF | 756 pages | English | 27 MB



Seismic measurements take many forms, and have a universal role in the earth sciences. There are huge rewards to be gained from ‘seeing’ below the earth’s surface. This unique book describes seismic behaviour at many scales, and provides the appropriate interpretation in terms of rock mechanics.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/49271735/62b0ad2/Rock_Quality__Seismic_Velocity__Attenuation_and_Anisotropy.rar.html
or
http://rapidshare.com/files/400102739/Rock_Quality__Seismic_Velocity__Attenuation_and_Anisotropy.rar.html

[istigatore]

Bridge Launching
Publisher: Thomas Telford Ltd | 2002-11-15 | ISBN: 0727731467 | PDF | 352 pages | 101.39 MB



This book is devoted to bridges that are built by incremental launching methods, using prestressed composite materials. It integrates the static, aesthetic, and economic aspects of construction techniques for building these state-of-the-art structures. Bridge launching is a comprehensive handbook, offering explanations of both the theoretical and technological aspects of the construction process. Both beam bridges and arch bridges are thoroughly analysed,and special theories aimed at optimising static aspects, as well as local phenomena
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/49536789/42fd680/098.zip.html
or
http://rapidshare.com/files/400937589/098.zip

[istigatore]

Stainless Steels for Design Engineers
ASM International | 2008 | ISBN: 0871707179 | 225 pages | PDF | 15 MB



This book contains everything engineers and designers need to make sound technical judgments about which stainless steels to use and how to use them. Extensive composition and property information on all five families of stainless steel, including newest alloys is included. Coverage addresses selection for corrosion resistance, processing, and major applications, FREE access to Thermo-Calc software for 3 element phase diagram simulation.
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/sgf0arsd7
or
http://hotfile.com/dl/50797682/353a337/0871707179.rar.html

[istigatore]

Wiley Critical Content: Petroleum Technology
Wiley-Interscience | 2007-03-23 | ISBN: 047013402X | 2209 pages | PDF | 28 MB



The two-volume reference Wiley Critical Content: Petroleum Technology presents a collection of over 40 articles that were reprinted from the Kirk-Othmer Encyclopedia of Chemical Technology and Ullmann's Encyclopedia of Industrial Chemistry. The articles are organized in three thematic subjects:
PART I: Exploration, Refining, Engineering, and Handling
PART II: Fuels
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/yevk0bvvu
or
http://hotfile.com/dl/51182411/2c44624/047013402X.rar.html

Working Guide to Petroleum and Natural Gas Production Engineering
Gulf Professional Publishing | 2009 | ISBN: 1856178455 | 352 pages | PDF | 14 MB



Based on the classic Standard Handbook of Petroleum and Natural Gas Engineering, Second Edition, the Working Guide to Petroleum and Natural Gas Production Engineering begins with an extensive overview of the basic principles, definitions, and data. Later chapters cover properties of hydrocarbon mixtures, flow natural flow of fluids, natural flow performance, artificial lift methods and corrosion and scaling. This book provides engineers with a bases for understanding important concepts such a flow phenomena, hydrate formation, pressure (surge) waves, or high viscosity liquid flow failure. The focus of book is to assist the reader to understand and avoid potential operational challenges and design effective solutions and operational responses.

Evaluate well inflow performance
Guide to properties of hydrocarbon mixtures
Evaluate Gas production and processing facilities
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/u2du4ffho
or
http://hotfile.com/dl/51019909/69cefeb/1856178455.rar.html

PEH Vol. 4 Production Operations Engineering
Society of Petroleum Engineers | English | 2007-01-01 | ISBN: 1555631185 | 908 pages | PDF | 42 MB



Production Operations Engineering, Vol. IV of the new Petroleum Engineering Handbook, is designed to replace the production engineering chapters found in the 1987 edition of the Handbook. There have been significant changes in technology and operating practices in the past 20 years, and these new chapters will bring you up to date in the areas of design, equipment selection, and operation procedures for most oil and gas wells.

The 16 chapters in this volume are divided into three groups.
The first section, on well completions, includes discussions of inflow and outflow performance; completion systems; tubing selection, design, and installation; perforating; and sand control. The next group of chapters deals with the problems caused by formation damage; topics include formation damage, matrix stimulation, hydraulic fracturing, and well production problems. The final chapters address the subject of artificial lift, a major concern for production engineers. Subjects mentioned include artificial lift selection, sucker-rod lift, gas lift, electrical submersible pumps, hydraulic pumping in oil wells, progressing cavity pumping systems, and plunger lift.

TOC
1 Infl ow and Outfl ow Performance - Michael L. Wiggins
2 Completion Systems - David Ruddock
3 Tubing Selection, Design, and Installation - Joe Dunn Clegg and Erich F. Klementich
4 Perforating - George E. King
5 Sand Control - W.L. Penberthy, Jr.
6 Formation Damage - Mukul M. Sharma
7 Matrix Acidizing - Harry O. McLeod
8 Hydraulic Fracturing - Stephen A. Holditch
9 Well Production Problems - Raymond Jasinski
10 Artifi cial Lift Systems - James F. Lea
11 Sucker-Rod Lift - Norman W. Hein, Jr.
12 Gas Lift - Herald W. Winkler and Jack R. Blann
13 Electrical Submersible Pumps - John Bearden
14 Hydraulic Pumping in Oil Wells - James Fretwell
15 Progressing Cavity Pumping Systems - Cam M. Matthews, Todd A. Zahacy, Francisco J.S. Alhanati, Paul Skoczylas, and Lonnie J. Dunn
16 Plunger Lift - Scott D. Listiak and Daniel H. Phillips
Author Index
Subject Index
DDLS

» Click to show Spoiler - click again to hide... «

http://depositfiles.com/files/lnfx0o3g9
or
http://www.megaupload.com/?d=M1D0QQIG

Сообщение отредактировал istigatore - 28.06.2010 - 18:15

[istigatore]

Handbook of Geotechnical Engineering Practice
Wiley-VCH | ISBN: 3433014493 | June 15, 2002 | Djvu | 650 pages | 23 MB

Volume 1 covers the basics necessary for any construction activity in foundation engineering. This systematic introduction to the assessment of soil and rock properties provides an insight into the requirements of Eurocode 7, Parts 1 and 3. It also gives details of geotechnical laboratory and field tests and the associated equipment, concise treatments of relevant solutions provided by the theories of elasticity and plasticity and numerical methods applied to solve problems of geotechnical design. The problems of earthquakes are also explained with regard to Eurocode 8.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/18594374/42d8378/Geoeng.rar.html
or
http://www.megaupload.com/?d=WNAHIHJ0

Geotechnical Investigation Methods: A Field Guide for Geotechnical Engineers
CRC Press, Taylor & Francis Group, LLC | 2007 | ISBN: 1420042742 | 342 pages | PDF | 11 Mb

The investigation phase is the most important segment of any geotechnical study. Using the correct methods and properly interpreting the results are critical to a successful investigation. Comprising chapters from the second edition of the revered Geotechnical Engineering Investigation Handbook, Geotechnical Investigation Methods offers clear, concise, and hands-on guidance for choosing and executing a variety of field investigations.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/31788885/b0ed9cf/GeotechInvMeth.rar.html
or
http://rapidshare.com/files/360352438/GeotechInvMeth.rar

[istigatore]

Michael W. Lucas, "Network Flow Analysis"
No Starch Press | 2010 | ISBN: 1593272030 | 224 pages | PDF | 1,8 MB



You know that servers have log files and performance measuring tools and that traditional network devices have LEDs that blink when a port does something. You may have tools that tell you how busy an interface is, but mostly a network device is a black box. Network Flow Analysis opens that black box, demonstrating how to use industry-standard software and your existing hardware to assess, analyze, and debug your network.

Unlike packet sniffers that require you to reproduce network problems in order to analyze them, flow analysis lets you turn back time as you analyze your network. You'll learn how to use open source software to build a flow-based network awareness system and how to use network analysis and auditing to address problems and improve network reliability. You'll also learn how to use a flow analysis system; collect flow records; view, filter, and report flows; present flow records graphically; and use flow records to proactively improve your network. Network Flow Analysis will show you how to:

* Identify network, server, router, and firewall problems before they become critical
* Find defective and misconfigured software
* Quickly find virus-spewing machines, even if they're on a different continent
* Determine whether your problem stems from the network or a server
* Automatically graph the most useful data

And much more. Stop asking your users to reproduce problems. Network Flow Analysis gives you the tools and real-world examples you need to effectively analyze your network flow data. Now you can determine what the network problem is long before your customers report it, and you can make that silly phone stop ringing.
DDLS

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/51742165/28589bd/1593272030Network.rar.html
Mirror
http://www.fileserve.com/file/D2Mmmd8/1593272030Network.rar

[istigatore]

Engineering Mechanics: Dynamics (12th Edition)
Prentice Hall | 2009 | ISBN: 0136077919 | 752 pages | PDF | 73 Mb



In his substantial revision of Engineering Mechanics, R.C. Hibbeler empowers students to succeed in the whole learning experience. Hibbeler achieves this by calling on his everyday classroom experience and his knowledge of how students learn inside and outside of lecture. In addition to over 50% new homework problems, the twelfth edition introduces the new elements of Conceptual Problems, Fundamental Problems and Mastering Engineering, the most technologically advanced online tutorial and homework system.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/54105128/4c288c5/Engineering_dynamic.rar.html
or
http://depositfiles.com/files/nl3xjljjy

[istigatore]

Magnus Wangen, "Physical Principles of Sedimentary Basin Analysis"
Cambridge University Press | 2010 | ISBN: 0521761255 | 544 pages | PDF | 5,6 MB



Presenting a rigorous treatment of the physical and mechanical basis for the modelling of sedimentary basins, this book supplies geoscientists with practical tools for creating their own models. It begins with a thorough grounding in properties of porous media, linear elasticity, continuum mechanics and rock compressibility. Chapters on heat flow, subsidence, rheology, flexure and gravity consider sedimentary basins in the context of the Earth's lithosphere, and the book concludes with coverage of pore space cementation, compaction and fluid flow
. The volume introduces basic, state-of-the-art models and demonstrates how to reproduce results using tools like MATLAB and Octave. Main equations are derived from first principles, and their basic solutions obtained and then applied. Separate notes sections supply more technical details, and the text is illustrated throughout with real-world examples, applications and test exercises. This is an accessible introduction to quantitative modelling of basins for graduate students, researchers and oil industry professionals.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/54592360/448efeb/0521761255SedimentaryAnalysis.rar.html
or
http://www.fileserve.com/file/HJTFeyr

Сообщение отредактировал istigatore - 21.07.2010 - 20:54

[istigatore]

Fossil Fuel-Fired Power Generation: Case studies of recently constructed coal- and gas-fired power plants
Oecd publishing | 2007 | 176 pages | ISBN:9264039082 | PDF | 6.5 Mb



To meet future energy demand growth and replace older or inefficient units, a large number of fossil fuel-fired plants will need to bebuilt worldwide in the next decade. Yet CO2 emissions from fossil-fired power generation are a major contributor to climate change. As a result, new plants must be designed and operated at highest efficiency. The case studies in this report respond to a request to the IEA from the G8 Summit in July 2005 to illustrate the degree of efficiency now achieved in modern plants in different parts of the world using various grades of fossil fuels. The plants were selected from different geographical areas, because local factors influence attainable efficiency.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/55000876/e6580c4/9264039082.rar.html
or
http://www.fileserve.com/file/jucUf6m

[istigatore]

Pipeline Rules of Thumb Handbook, Seventh Edition: A Manual of Quick, Accurate Solutions to Everyday Pipeline Engineering Problems
2009 | 800 pages | ISBN:1856175006 | PDF | 13 Mb



This classic reference has built a reputation as the "go to" book to solve even the most vexing pipeline problems. Now in its seventh edition, Pipeline Rules of Thumb Handbook continues to set the standard by which all others are judged. The 7th edition features over 30% new and updated sections, reflecting the exponential changes in the codes, construction and equipment since the sixth edition. The seventh edition includes: recommended drill sizes for self-tapping screws, new ASTM standard reinforcing bars, calculations for calculating grounding resistance, national Electrical Code tables, Corilis meters, pump seals, progressive cavity pumps and accumulators for lubricating systems.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/55596217/8da5573/Pipeline_Rules_of_Thumb_Handbook___Seventh_Edition.rar.html
or
http://www.fileserve.com/file/yE3HH4M

[istigatore]

Steels: Processing, Structure, And Performance
2005 | 613 pages | ISBN:0871708175 | PDF | 15 Mb



This volume is an essential reference for anyone who makes, uses, studies, or designs with steel. The interrelationships between chemistry, processing, structure, and performance--the elements of physical metallurgy--are integrated for all the types of steel discussed. The evolution, characterization, and performance of steel microstructures are described, with increased emphasis on deformation and fracture.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/56598461/62a2a06/0871708175.rar.html
or
http://www.fileserve.com/file/hwzS3nm

[istigatore]

Steel Bridge Construction, Myths & Realities
2007 | 452 pages | ISBN:1456256324 | PDF | 6.8 Mb



This booklet is an updated and expanded version of the original document published in the mid-90s. Its purpose is to dispel some of the ”myths” or misconceptions surrounding the use of steel in bridge construction. These myths often arise out of past experience and don’t take into account changes in technology, improvements in materials and products or updated design and construction practices.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/57021082/87ffaa4/Steel_Bridge_Construction__Myths___Realities_D432-07_R20090210A.rar.html
or
http://www.fileserve.com/file/rsey4XS

Сообщение отредактировал istigatore - 23.07.2010 - 20:06

[istigatore]

Tarek Ahmed - Reservoir Engineering Handbook [Fourth Edition]
Elsevier, Gulf Professional Publishing | 2010 | ISBN: 185617803X | 1463 pages | PDF | 16 MB



This book explains the fundamentals of reservoir engineering and their practical application in conducting a comprehensive field study.
Chapter 1 reviews fundamentals of reservoir fluid behavior with an emphasis on the classification of reservoir and reservoir fluids.
Chapter 2 documents reservoir-fluid properties, while Chapter 3 presents a comprehensive treatment and description of the routine and specialized PVT laboratory tests.
The fundamentals of rock properties are discussed in Chapter 4 and numerous methodologies for generating those properties are reviewed.
Chapter 5 focuses on presenting the concept of relative permeability and its applications in fluid flow calculations.
The fundamental mathematical expressions that are used to describe the reservoir fluid flow behavior in porous media are discussed in Chapter 6, while Chapters 7 and 8 describe the principle of oil and gas well performance calculations, respectively.
Chapter 9 provides the theoretical analysis of coning and outlines many of the practical solutions for calculating water and gas coning behavior.
Various water influx calculation models are shown in Chapter 10, along with detailed descriptions of the computational steps involved in applying these models.
The objective of Chapter 11 is to introduce the basic principle of oil recovery mechanisms and to present the generalized form of the material balance equation.
Chapters 12 and 13 focus on illustrating the practical applications of the material balance equation in oil and gas reservoirs.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/57422471/e5eb559/ResEngHB10.rar.html
or
http://freakshare.net/files/ykcym68w/ResEngHB10.rar.html

Highway Engineering Handbook third Edition
2009 | 885 pages | ISBN:0071597638 | PDF | 8 Mb



This trusted resource has been thoroughly updated to reflect the latest codes, standards, and policies of the American Association of State Highway and Transportation Officials (AASHTO), as well as new engineering developments. Filled with photos, illustrations, schematics, tables, and design equations, this authoritative reference is essential for anyone involved in or studying highway engineering.
DDLs

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/57680352/1e84917/0071597638_Highway_Engineer.rar.html
or
http://www.fileserve.com/file/9YqFayB

Сообщение отредактировал istigatore - 28.07.2010 - 20:04

[istigatore]

Limit States Design of Structural Steelwork
2007 | 274 pages | ISBN:0412397005 | PDF | 6 Mb



The text introduces the basic properties of steel, types of steel structure and steelwork design in order to develop an understanding of the various aspects of the behavior and design of structural steelwork. This edition has been thoroughly revised in accordance with the 2000 amendment to Part 1 of BS 5950 - all references have been updated and a new section on partial encasement for fire resistance has been added. Each chapter features worked examples, practice problems and references.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/58088662/62a3d35/Limit_State_Design_of_Structural_Steelwork.pdf.html
or
http://www.fileserve.com/file/fVvnNE6

Pile Design for Structural and Geotechnical Engineers
2008 | 416 pages | ISBN:0750687630 | PDF | 6.2 Mb



This book enables the reader to come away with a complete and comprehensive understanding of the issues related to the design, installation and construction of piles.

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/58080567/ce8499b/0750687630.rar.html
or
http://www.fileserve.com/file/2A5rYq6

[istigatore]

Process Piping: The Complete Guide to Asme B31.3
2007 | 269 pages | ISBN:0791801772 | PDF | 8 Mb



This essential new volume provides background information, historical perspective, and expert commentary on the ASME B31.3 Code requirements for process piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of process piping. The author is a long-serving member of the ASME B31.3, Process Piping Code committee. Dr. Becht explains the principal intentions of the Code

» Click to show Spoiler - click again to hide... «

http://hotfile.com/dl/62065644/4c3e2ba/ProcPipinGuid.rar.html
ot
http://www.fileserve.com/file/m3wdYzE