ASVIC Mech-Q Full Suite v4.21.100 for AutoCAD 2000-2021, HVAC tools |
Здравствуйте, гость ( Вход | Регистрация )
Here You Can Support Our Work and .:LavTeaM:. Services |
ASVIC Mech-Q Full Suite v4.21.100 for AutoCAD 2000-2021, HVAC tools |
12.02.2019 - 16:05
Сообщение
#41
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21854 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55875 раз(а) |
ASVIC Mech-Q Full Suite v4.21.100 for AutoCAD 2000-2021 x32+x64
If your looking for powerful Engineering Software that that gets the job done, look no further. Mech-Q is AutoCAD Mechanical, Structural, HVAC, and Piping all in one suite! Features: - Comprehensive pipe, fittings, and valves. - Create Rectangular, round and flat oval ducting. - Includes range of mechanical symbols & housings, gears and more. - Create steel details, shapes, stairs and more. + = link. 98 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
30.05.2016 - 12:33
Сообщение
#42
|
|
Завсегдатай Группа: Пользователи Пользователь №: 152898 Сообщений: 144 Регистрация: 29.03.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 248 раз(а) |
Done. Tested in AutoCAD 2015 Mechanical.
Thanks Сообщение отредактировал ssf86 - 31.05.2016 - 06:31 |
|
|
31.05.2016 - 01:31
Сообщение
#43
|
|
Из местных Группа: Пользователи Пользователь №: 154738 Сообщений: 84 Регистрация: 5.07.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 18 раз(а) |
ssf86 :
Thank you for your selfless sharing Thanks again! |
|
|
31.05.2016 - 06:29
Сообщение
#44
|
|
Завсегдатай Группа: Пользователи Пользователь №: 152898 Сообщений: 144 Регистрация: 29.03.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 248 раз(а) |
Dear All,
Here is the keygen posted openly. No more PMs now. 1, Download and Extract the zipped file. 2, Load the file (Mech_Qv4_Keygen.fas) in AutoCAD. 3, Run the command MQKEY and input the serial number. 4, You activation key will be printed in commandline. Just copy and paste it in the Authorisation Dialog box. 5, Enjoy the software. Mech_Q_v4_Keygen.zip ( 911 байт ) Кол-во скачиваний: 154 Сообщение отредактировал ssf86 - 31.05.2016 - 10:18 |
|
|
31.05.2016 - 06:44
Сообщение
#45
|
|
Активный пользователь Группа: Teamer Пользователь №: 155810 Сообщений: 1324 Регистрация: 6.09.2012 Из: црна гора Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 827 раз(а) |
Приватный текст
|
|
|
31.05.2016 - 08:49
Сообщение
#46
|
|
Из местных Группа: Пользователи Пользователь №: 154669 Сообщений: 54 Регистрация: 2.07.2012 Из: Viet Nam Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 4 раз(а) |
I've tested with acad 2007 x64 successful.
Thank a lot ssf86, LAVteam.org |
|
|
31.05.2016 - 10:22
Сообщение
#47
|
|
Новичок Группа: Пользователи Пользователь №: 110002 Сообщений: 6 Регистрация: 11.03.2009 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 6 раз(а) |
Dear All, Here is the keygen posted openly. No more PMs now. 1, Download and Extract the zipped file. 2, Load the file (Mech_Qv4_Keygen.fas) in AutoCAD. 3, Run the command MQKEY and input the serial number. 4, You activation key will be printed in commandline. Just copy and paste it in the Authorisation Dialog box. 5, Enjoy the software. Mech_Q_v4_Keygen.zip ( 911 байт ) Кол-во скачиваний: 154 Thanks man great work |
|
|
1.06.2016 - 01:13
Сообщение
#48
|
|
Прохожий Группа: Пользователи Пользователь №: 138316 Сообщений: 23 Регистрация: 4.09.2010 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 5 раз(а) |
I need direct download link for Mech_Q v4. Anyone will help?
|
|
|
1.06.2016 - 01:21
Сообщение
#49
|
|
Завсегдатай Группа: Пользователи Пользователь №: 152898 Сообщений: 144 Регистрация: 29.03.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 248 раз(а) |
hxxp://cadavenue.com/get-dloads
|
|
|
1.06.2016 - 11:06
Сообщение
#50
|
|
Прохожий Группа: Пользователи Пользователь №: 59515 Сообщений: 44 Регистрация: 28.04.2007 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 14 раз(а) |
hxxps://www.asvic.com.au/index.php?com=com_content&itemid=45
|
|
|
5.06.2016 - 20:36
Сообщение
#51
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21854 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55875 раз(а) |
ASVIC Mech-Q Full Suite v4.16.001 for AutoCAD 2002-2019 x32+x64
If your looking for powerful Engineering Software that that gets the job done, look no further. Mech-Q is AutoCAD Mechanical, Structural, HVAC, and Piping all in one suite! Features: - Comprehensive pipe, fittings, and valves. - Create Rectangular, round and flat oval ducting. - Includes range of mechanical symbols & housings, gears and more. - Create steel details, shapes, stairs and more. + = link. 68 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
6.06.2016 - 13:36
Сообщение
#52
|
|
Завсегдатай Группа: Пользователи Пользователь №: 137901 Сообщений: 135 Регистрация: 17.08.2010 Из: Харьков Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 23 раз(а) |
ASVIC Mech-Q Full Suite v4.00.013 for AutoCAD 2010-2017 x86+x64 PS На русскую версию Автокада сабж в лоб не ставится. На буржуинскую локализацию встает как влитой. Кто напишет инструкцию, что надо поменять в реестре, тому пряник. Всем мир. Я ставил на виртуальной машине Win7 x32. Кроме Autocada ни каких программ больше не установленно: -Установил -подгрузил наугад - acad2017doc.lsp и acad.lsp - заработало. далее как в инструкции у ssf86: -активировал. При активации были проблемы, то не верный адрес, то не верно имя, то не активна кнопка "Apply Key", но с N-ой попытки и при использовании для перехода со строки на строку клавиши "TAB" все получилось. На других Win xp, 8 и 10 не пробовал. Больше помочь не могу. __________.png ( 220.14 килобайт ) Кол-во скачиваний: 103 Сообщение отредактировал s-konstruktor - 6.06.2016 - 13:54 |
|
|
19.04.2018 - 14:28
Сообщение
#53
|
|
Завсегдатай Группа: Пользователи Пользователь №: 152898 Сообщений: 144 Регистрация: 29.03.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 248 раз(а) |
New Version of Mech-Q released for AutoCAD 2019.
Tested the Old keygen & it still works perfectly. hxxps://www.asvic.com.au/Download-MechQ/ Сообщение отредактировал ssf86 - 19.04.2018 - 14:28 |
|
|
22.04.2018 - 19:23
Сообщение
#54
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21854 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55875 раз(а) |
ASVIC Mech-Q Full Suite v4.14.004 for AutoCAD 2000-2019 x32+x64
If your looking for powerful Engineering Software that that gets the job done, look no further. Mech-Q is AutoCAD Mechanical, Structural, HVAC, and Piping all in one suite! Features: - Comprehensive pipe, fittings, and valves. - Create Rectangular, round and flat oval ducting. - Includes range of mechanical symbols & housings, gears and more. - Create steel details, shapes, stairs and more. + = link. 68 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
23.04.2018 - 18:49
Сообщение
#55
|
|
Прохожий Группа: Пользователи Пользователь №: 109801 Сообщений: 21 Регистрация: 9.03.2009 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2 раз(а) |
Dear Williams
Please make Mech-Q keygen for Bricscad. Thanks |
|
|
21.08.2018 - 12:46
Сообщение
#56
|
|
Живущий здесь Группа: Модераторы Пользователь №: 154947 Сообщений: 2215 Регистрация: 17.07.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 3300 раз(а) |
Asvic AviCAD Pro 2019 (30 days Trial)
Minimum Requirements Microsoft Windows® XP, Windows® Vista, Windows 7®, Windows 8® or Windows 8.1® or Windows 10® - 32 or 64 Bit Intel Pentium® IV or AMD equivalent. Anyway more powerful processors are strongly recommended. 2 GB RAM (minimum recommended) 4 GB of hard disk space Nothing to learn, if you are AutoCAD® users Works natively with DWG! Fully compatible with AutoCAD® without conversion Packed with Mechanical & Architectural Tools ?Mech-Q Engineering Apps included Create architectural layouts in a flash with the EasyArch parametric plug-in Export to Google Earth® 25.000 blocks ready to use + customizable blocks manager Import/Export - STEP, IGES, PDF, 3D PDF, DWF, 3DS, DAE, LWO, POV, Maya, OBJ, BMP, JPG, WMF, EMF, SVG The Mech-Q Mechanical software module includes a comprehensive range of mechanical symbols, fasteners, gears, material handling items (conveyor rolls, sprockets, trajectory..), springs, shafts... The Mech-Q Piping Pro software module: 2d/3d Othogonal, Isometric & P&ID - Includes a huge range of pipe, fittings, flanges and valves. Welded, flanged, threaded, screwed, ductile iron & cast iron, "Victaulic", PVC... and several other piping systems. The module is equipped with features like: Auto-BOM.. The Mech-Q HVAC Ducting software module - 2D & 3D Ducting made easy. Rectangular, round and flat oval. Several Duct and Duct fittings included: Duct bends, transitions, tees & wyes, offsets, branches, dampers, diffusers, flexible duct. With Auto-BOM and Auto-Labelling. The Mech-Q Structural Pro software module is utilised for the drawing of structural steel drawings. It includes steel shapes from around the world, Draw beams & columns with ease, beam-connections, stairs, ladders, bracing, hand railing, frames, welding symbols, beam loading designer... CODE http://www.avicad.com/dloads/AviCADPro2019-64.exe
http://www.avicad.com/dloads/AviCADPro2019-32.exe |
|
|
15.11.2018 - 19:53
Сообщение
#57
|
|
Живущий здесь Группа: Модераторы Пользователь №: 154947 Сообщений: 2215 Регистрация: 17.07.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 3300 раз(а) |
Version 19.0.8.17
What's New CODE http://www.avicad.com/history CODE http://www.avicad.com/dloads/AviCADPro2019-64.exe
http://www.avicad.com/dloads/AviCADPro2019-32.exe |
|
|
26.11.2018 - 13:49
Сообщение
#58
|
|
Завсегдатай Группа: Пользователи Пользователь №: 60956 Сообщений: 158 Регистрация: 14.05.2007 Из: turkie Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 146 раз(а) |
is there a patch for the latest version posted here?. 2ak2 Please help
|
|
|
10.02.2019 - 15:09
Сообщение
#59
|
|
Завсегдатай Группа: Пользователи Пользователь №: 152898 Сообщений: 144 Регистрация: 29.03.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 248 раз(а) |
New version of Mech-Q 4.16.001 is available and the old medicine still works perfectly.
hxxp://cadavenue.com/get-dloads Also, AviCAD 2019 works with "Zel's Medicine of ProgeCAD 2019" Attached. I did not find any options in Mech-Q not working in AviCAD. Can someone report? AMPED.rar ( 36.06 килобайт ) Кол-во скачиваний: 65 |
|
|
12.02.2019 - 20:06
Сообщение
#60
|
|
Активный пользователь Группа: Teamer Пользователь №: 155810 Сообщений: 1324 Регистрация: 6.09.2012 Из: црна гора Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 827 раз(а) |
Приватный текст
|
|
|
Текстовая версия | Сейчас: 24.04.2024 - 00:02 |