IPB

Здравствуйте, гость ( Вход | Регистрация )

11 страниц V  « < 9 10 11  
Ответить в данную темуНачать новую тему
Строительное проектирование, Ссылки на литературу по теме.
Williams
сообщение 1.11.2020 - 06:04
Сообщение #201


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 18579
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 38037 раз(а)



American Concrete Institute:
Building Code Requirements for Structural Concrete (ACI 318-19)
Commentary on Building Code Requirements for Structural Concrete (ACI 318R-19)


ACI, 2019
pdf, 2x628 pages, english
ISBN: 978-1-64195-056-5




The ”Building Code Requirements for Structural Concrete” (”Code”) provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code was developed by an ANSI-approved consensus process and addresses structural systems, members, and connections, including cast-in-place, precast, shotcrete, plain, nonprestressed, prestressed, and composite construction. Among the subjects covered are: design and construction for strength, serviceability, and durability; load combinations, load factors, and strength reduction factors; structural analysis methods; deflection limits; mechanical and adhesive anchoring to concrete; development and splicing of reinforcement; construction document information; field inspection and testing; and methods to evaluate the strength of existing structures.

The Code was substantially reorganized and reformatted in 2014, and this Code continues and expands that same organizational philosophy. The principal objectives of the reorganization were to present all design and detailing requirements for structural systems or for individual members in chapters devoted to those individual subjects, and to arrange the chapters in a manner that generally follows the process and chronology of design and construction. Information and procedures that are common to the design of multiple members are located in utility chapters. Additional enhancements implemented in this Code to provide greater clarity and ease of use include the first use of color illustrations and the use of color to help the user navigate the Code and quickly find the information they need. Special thanks to Bentley Systems, Incorporated, for use of their ProConcrete software to produce many of the figures found in the Commentary.

Uses of the Code include adoption by reference in a general building code, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code provisions cannot be included within the Code itself. The Commentary is provided for this purpose.

Some considerations of the committee in developing the Code are discussed in the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.

Keywords: admixtures; aggregates; anchorage (structural); beam-column frame; beams (supports); caissons; cements; cold weather; columns (supports); combined stress; composite construction (concrete to concrete); compressive strength; concrete; construction documents; construction joints; continuity (structural); contraction joints; cover; curing; deep beams; deep foundations; deflections; drilled piers; earthquake-resistant structures; flexural strength; floors; footings; formwork (construction); hot weather; inspection; isolation joints; joints (junctions); joists; lightweight concretes; load tests (structural); loads (forces); mixture proportioning; modulus of elasticity; moments; piles; placing; plain concrete; precast concrete; prestressed concrete; prestressing steels; quality control; reinforced concrete; reinforcing steels; roofs; serviceability; shear strength; shotcrete; spans; splicing; strength analysis; stresses; structural analysis; structural design; structural integrity; structural walls; T-beams; torsion; walls; water; welded wire reinforcement.

link.
23 Mb (RAR5, incl. 3% - info for restoration purpose)

PS Metric system added
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 2.11.2020 - 11:11
Сообщение #202


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 18579
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 38037 раз(а)



CSA Group -
Canadian Highway Bridge Design Code, CSA S6:19
Commentary on Canadian Highway Bridge Design Code, CSA S6.1:19
Code canadien sur le calcul des ponts routiers, CSA S6:19


CSA Group, 2019
pdf, 1185+1092+1286 pages, english/english/french




The CSA S6, Canadian Highway Bridge Design Code applies to the design, evaluation and structural rehabilitation design of fixed and movable highway bridges and establishes safety and reliability levels that are consistent across all jurisdictions in Canada.

link.
59 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 6.11.2020 - 07:37
Сообщение #203


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 18579
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 38037 раз(а)



M. Nadim Hassoun, Akthem Al-Manaseer - Structural Concrete: Theory and Design, 7 Edition

Wiley, 2020
pdf, 956 pages, english
ISBN: 978-1-11960-513-3




The leading structural concrete design reference for over two decades―updated to reflect the latest ACI 318-19 code.

A go-to resource for structural engineering students and professionals for over twenty years, this newly updated text on concrete structural design and analysis reflects the most recent ACI 318-19 code. It emphasizes student comprehension by presenting design methods alongside relevant codes and standards. It also offers numerous examples (presented using SI units and US-SI conversion factors) and practice problems to guide students through the analysis and design of each type of structural member.

New to Structural Concrete: Theory and Design, Seventh Edition are code provisions for transverse reinforcement and shear in wide beams, hanger reinforcement, and bi-directional interaction of one-way shear. This edition also includes the latest information on two-way shear strength, ordinary walls, seismic loads, reinforcement detailing and analysis, and materials requirements. This book covers the historical background of structural concrete; advantages and disadvantages; codes and practice; and design philosophy and concepts. It then launches into a discussion of the properties of reinforced concrete, and continues with chapters on flexural analysis and design; deflection and control of cracking; development length of reinforcing bars; designing with the strut-and-tie method; one-way slabs; axially loaded columns; and more.

Updated to align with the new ACI 318-19 code with new code provisions to include: transverse reinforcement and shear in wide beams, hanger reinforcement, bi-directional interaction of one-way shear, and reference to ACI certifications:
- Includes dozens of worked examples that explain the analysis and design of structural members
- Offers updated information on two-way shear strength, seismic loads, materials requirements, and more
- Improves the design ability of students by explaining code requirements and restrictions
- Provides examples in SI units in every chapter as well as conversion factors from customary units to SI
- Offers instructors access to a solutions manual via the book's companion website

Structural Concrete: Theory and Design, Seventh Edition is an excellent text for undergraduate and graduate students in civil and structural engineering programs. It will also benefit concrete designers, structural engineers, and civil engineers focused on structures.

link.
25 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 16.11.2020 - 07:12
Сообщение #204


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 18579
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 38037 раз(а)



Shun Chai - Finite Element Analysis for Civil Engineering with DIANA Software

Springer, 2020
pdf, 644 pages, english
ISBN: 978-981-15-2944-3




This book systematically introduces readers to the finite element analysis software DIANA (DIsplacement ANAlyzer) and its applications in civil engineering. Developed by TNO Corporation in the 1970s, DIANA is frequently used in civil engineering and engineering mechanics.

Unlike the software user’s manual, which provides a comprehensive introduction and theoretical analysis, this book presents a simplified overview of the basic background theory to help beginners master the software quickly. It also discusses GUI operation and the command console in Python language, and includes examples involving classical modeling operations to help readers review each section.

Both the book and DIANA itself are valuable resources for students and researchers in all the structural engineering fields, such as civil engineering, bridge engineering, geotechnical engineering, tunnel engineering, underground structural engineering, irrigation, municipal engineering and fire engineering.

link.
30 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение

11 страниц V  « < 9 10 11
Ответить в данную темуНачать новую тему
4 чел. читают эту тему (гостей: 4, скрытых пользователей: 0)
Пользователей: 0

 



RSS Текстовая версия Сейчас: 5.12.2020 - 01:53