DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD |
Здравствуйте, гость ( Вход | Регистрация )
Here You Can Support Our Work and .:LavTeaM:. Services |
DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD |
5.04.2016 - 09:02
Сообщение
#421
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21851 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55868 раз(а) |
DotSoft ToolPac v23.0.0.0
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: https://dotsoft.com/toolpac.htm + = link. 47 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
29.06.2017 - 03:53
Сообщение
#422
|
|
Новичок Группа: Пользователи Пользователь №: 171013 Сообщений: 4 Регистрация: 30.08.2014 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
Any fix for this error when executing some Toolpac commands ?
|
|
|
3.07.2017 - 12:00
Сообщение
#423
|
|
Из местных Группа: Пользователи Пользователь №: 118111 Сообщений: 60 Регистрация: 18.06.2009 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2 раз(а) |
On the instructions it says in order to work properly to unlock .dll files by right clicking, but i dont see that options on windows 8-10? How can this be done
|
|
|
22.11.2017 - 14:21
Сообщение
#424
|
|
Новичок Группа: Пользователи Пользователь №: 94645 Сообщений: 10 Регистрация: 1.09.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
|
|
|
22.11.2017 - 18:24
Сообщение
#425
|
|
Прохожий Группа: Пользователи Пользователь №: 173477 Сообщений: 23 Регистрация: 8.12.2014 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 20 раз(а) |
On the instructions it says in order to work properly to unlock .dll files by right clicking, but i dont see that options on windows 8-10? How can this be done the word is "Unblock" with a "B" not "Unlock" see attached image
Прикрепленные файлы
|
|
|
2.04.2018 - 19:18
Сообщение
#426
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2966 раз(а) |
Toolpac 18.0.0.6
» Click to show Spoiler - click again to hide... «
18.0.0.9 update » Click to show Spoiler - click again to hide... «
Apply patch (Bricscad & ZWCAD supported)
Прикрепленные файлы
|
|
|
2.04.2018 - 19:56
Сообщение
#427
|
|
Активный пользователь Группа: Пользователи Пользователь №: 188190 Сообщений: 863 Регистрация: 11.01.2017 Из: Pakistan Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 409 раз(а) |
Slinger, Apply patch before update or after?
|
|
|
2.04.2018 - 20:31
Сообщение
#428
|
|
Живущий здесь Группа: Модераторы Пользователь №: 154947 Сообщений: 2215 Регистрация: 17.07.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 3300 раз(а) |
After. Tried and working.
Installed and works in 2016 and 2019. Сообщение отредактировал santorini - 2.04.2018 - 20:36 |
|
|
2.04.2018 - 21:28
Сообщение
#429
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2966 раз(а) |
ioncube, After. And patch should work for any further updates. I'm just add support for bricscad and zwcad (but not tested them. It should work)
Сообщение отредактировал Slinger - 2.04.2018 - 21:29 |
|
|
3.04.2018 - 17:35
Сообщение
#430
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21851 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55868 раз(а) |
DotSoft ToolPac v18.0.0.9
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 32 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
3.04.2018 - 20:42
Сообщение
#431
|
|
Завсегдатай Группа: Пользователи Пользователь №: 175812 Сообщений: 203 Регистрация: 2.03.2015 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 129 раз(а) |
Please upload the autocad 2019 full keygen.
|
|
|
5.12.2018 - 10:10
Сообщение
#432
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2966 раз(а) |
» Click to show Spoiler - click again to hide... «
18.0.5.0 Added support for BricsCAD 19 and IntellCAD 9 Сообщение отредактировал Slinger - 5.12.2018 - 12:16
Прикрепленные файлы
|
|
|
8.12.2018 - 09:45
Сообщение
#433
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21851 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55868 раз(а) |
DotSoft ToolPac v18.0.5.0
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 19 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
1.03.2019 - 12:09
Сообщение
#434
|
|
Новичок Группа: Пользователи Пользователь №: 188986 Сообщений: 3 Регистрация: 15.02.2017 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
Выложите пожалуйста руководство по установке, оно не загружается на autocad 2019.
|
|
|
28.03.2019 - 14:08
Сообщение
#435
|
|
Новичок Группа: Пользователи Пользователь №: 32947 Сообщений: 15 Регистрация: 26.04.2006 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2 раз(а) |
объект удалён |
|
|
28.03.2019 - 14:19
Сообщение
#436
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2966 раз(а) |
TieLay, нет смысла в таком старье
поднимите глаза на 3 сообщения выше, там есть ссылка на актуальный инсталлятор и патч |
|
|
21.04.2019 - 22:11
Сообщение
#437
|
|
Свой человек Группа: Пользователи Пользователь №: 102276 Сообщений: 531 Регистрация: 8.12.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 1396 раз(а) |
TOOLPAC Installer
old patch ok with cad 2020 » Click to show Spoiler - click again to hide... «
Сообщение отредактировал GK.000 - 21.04.2019 - 22:14 |
|
|
22.04.2019 - 18:03
Сообщение
#438
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2966 раз(а) |
It's worked because old version still downloaded. 18.0.5.3
If different installer (with different name) for 19 version available already - this is too bad. |
|
|
8.05.2019 - 04:44
Сообщение
#439
|
|
Прохожий Группа: Пользователи Пользователь №: 177919 Сообщений: 29 Регистрация: 24.05.2015 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 87 раз(а) |
CODE https://mega.nz/#!XNEiTYDQ!xY2dH8wqUo-RpsHQ4RvrAjlctJ6gT1hjvgLizQ9Vq8M ToolPac 19.0.0.6 Upgrade & Patch |
|
|
20.05.2019 - 15:51
Сообщение
#440
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 969 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2966 раз(а) |
looks like other link for version 19 available. But with different name. So we can only manually download updates for version 19 and install them. And they are working fine.
ToolPac 19.0.0.9 » Click to show Spoiler - click again to hide... «
New patch added. But old one works too. Сообщение отредактировал Slinger - 20.05.2019 - 16:07
Прикрепленные файлы
|
|
|
9.06.2019 - 03:28
Сообщение
#441
|
|
Новичок Группа: Пользователи Пользователь №: 188986 Сообщений: 3 Регистрация: 15.02.2017 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
Not showing in autocad 2020/windows 10, after install, please help how to install properly. As per instruction to right click dll files and unblock. Theres no option to unblock dll file when right click. Thanks
|
|
|
Текстовая версия | Сейчас: 23.04.2024 - 09:34 |