IPB

Здравствуйте, гость ( Вход | Регистрация )

 
Ответить в данную темуНачать новую тему
Perry's Chemical Engineers' Handbook, 9th Edition, Perry's Chemical Engineers' Handbook, 9th Edition
lavteam522
сообщение 23.06.2019 - 07:50
Сообщение #1


Завсегдатай
Иконка группы

Группа: Пользователи
Пользователь №: 162214
Сообщений: 236
Регистрация: 28.07.2013
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 225 раз(а)



Прикрепленный файл  0071834087_1.jpg ( 289.79 килобайт ) Кол-во скачиваний: 2


https://www.mhprofessional.com/9780071834087-usa-perrys-chemical-engineers-handbook-9th-edition-group

Table of Contents
A. About the Editors
B. Contributors
C. Preface to the Ninth Edition
1. Section 1: Unit Conversion Factors and Symbols
CHAPTER PRELIMINARIES
UNITS AND SYMBOLS
CONVERSION FACTORS
2. Section 2: Physical and Chemical Data
CHAPTER PRELIMINARIES
GENERAL REFERENCES
PHYSICAL PROPERTIES OF PURE SUBSTANCES
VAPOR PRESSURES
VAPOR PRESSURES OF SOLUTIONS
SOLUBILITIES
DENSITIES
DENSITIES OF AQUEOUS INORGANIC SOLUTIONS AT 1 ATM
DENSITIES OF MISCELLANEOUS MATERIALS
LATENT HEATS
SPECIFIC HEATS
PROPERTIES OF FORMATION AND COMBUSTION REACTIONS
HEATS OF SOLUTION
THERMAL EXPANSION AND COMPRESSIBILITY
THERMODYNAMIC PROPERTIES
TRANSPORT PROPERTIES
PREDICTION AND CORRELATION OF PHYSICAL PROPERTIES*
3. Section 3: Mathematics
CHAPTER PRELIMINARIES
GENERAL REFERENCES
MATHEMATICS
MENSURATION FORMULAS
ELEMENTARY ALGEBRA
ANALYTIC GEOMETRY
PLANE TRIGONOMETRY
DIFFERENTIAL AND INTEGRAL CALCULUS
INFINITE SERIES
COMPLEX VARIABLES
DIFFERENTIAL EQUATIONS
DIFFERENCE EQUATIONS
INTEGRAL EQUATIONS
INTEGRAL TRANSFORMS (OPERATIONAL METHODS)
MATRIX ALGEBRA AND MATRIX COMPUTATIONS
NUMERICAL APPROXIMATIONS TO SOME EXPRESSIONS
NUMERICAL ANALYSIS AND APPROXIMATE METHODS
NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS AS INITIAL-VALUE PROBLEMS
OPTIMIZATION
STATISTICS
DIMENSIONAL ANALYSIS
PROCESS SIMULATION
4. Section 4: Thermodynamics
CHAPTER PRELIMINARIES
INTRODUCTION
GENERAL BALANCES
PROPERTY CALCULATIONS FROM EQUATIONS OF STATE
SYSTEMS OF VARIABLE COMPOSITION
TRENDS IN PHASE BEHAVIOR
TEMPERATURE DEPENDENCE OF INFINITE-DILUTION ACTIVITY COEFFICIENTS
THERMODYNAMICS FOR CONCEPTUAL DESIGN
REACTING SYSTEMS
5. Section 5: Heat and Mass Transfer
CHAPTER PRELIMINARIES
HEAT TRANSFER
HEAT TRANSFER BY CONDUCTION
HEAT TRANSFER BY CONVECTION
HEAT TRANSFER WITH CHANGE OF PHASE
HEAT TRANSFER BY RADIATION
MASS TRANSFER
6. Section 6: Fluid and Particle Dynamics
CHAPTER PRELIMINARIES
FLUID DYNAMICS
PARTICLE DYNAMICS
7. Section 7: Reaction Kinetics
CHAPTER PRELIMINARIES
REFERENCES
INTRODUCTION
BASIC CONCEPTS
IDEAL REACTORS
KINETICS OF COMPLEX HOMOGENEOUS REACTIONS
INTRINSIC KINETICS FOR FLUID-SOLID CATALYTIC REACTIONS
FLUID-SOLID REACTIONS WITH MASS AND HEAT TRANSFER
GAS-LIQUID REACTIONS
GAS-LIQUID-SOLID REACTIONS
DETERMINATION OF MECHANISM AND KINETICS
8. Section 8: Process Control
CHAPTER PRELIMINARIES
FUNDAMENTALS OF PROCESS DYNAMICS AND CONTROL
ADVANCED CONTROL SYSTEMS
UNIT OPERATIONS CONTROL
BATCH PROCESS CONTROL
BIOPROCESS CONTROL
TELEMETERING AND TRANSMISSION
DIGITAL TECHNOLOGY FOR PROCESS CONTROL
PROCESS MEASUREMENTS
CONTROLLERS, FINAL CONTROL ELEMENTS, AND REGULATORS
9. Section 9: Process Economics
CHAPTER PRELIMINARIES
GENERAL COMMENTS
ACCOUNTING AND FINANCIAL CONSIDERATIONS
CAPITAL COST ESTIMATION
MANUFACTURING/OPERATING EXPENSES
FACTORS THAT AFFECT PROFITABILITY
PROFITABILITY
OTHER ECONOMIC TOPICS
CAPITAL PROJECT EXECUTION AND ANALYSIS
GLOSSARY
10. Section 10: Transport and Storage of Fluids
CHAPTER PRELIMINARIES
MEASUREMENT OF FLOW
PUMPS AND COMPRESSORS
COMPRESSORS
PROCESS PLANT PIPING
STORAGE AND PROCESS VESSELS
11. Section 11: Heat-Transfer Equipment
CHAPTER PRELIMINARIES
THERMAL DESIGN OF HEAT-TRANSFER EQUIPMENT
TEMA-STYLE SHELL-AND-TUBE HEAT EXCHANGERS
HAIRPIN/DOUBLE-PIPE HEAT EXCHANGERS
AIR-COOLED HEAT EXCHANGERS
COMPACT AND NONTUBULAR HEAT EXCHANGERS
HEAT EXCHANGERS FOR SOLIDS
THERMAL INSULATION
AIR CONDITIONING
REFRIGERATION
EVAPORATORS
12. Section 12: Psychrometry, Evaporative Cooling, and Solids Drying
CHAPTER PRELIMINARIES
PSYCHROMETRY
EVAPORATIVE COOLING
SOLIDS-DRYING FUNDAMENTALS
13. Section 13: Distillation
CHAPTER PRELIMINARIES
INTRODUCTION TO DISTILLATION OPERATIONS
THERMODYNAMIC DATA AND MODELS
SINGLE-STAGE EQUILIBRIUM FLASH CALCULATIONS
GRAPHICAL METHODS FOR BINARY DISTILLATION
APPROXIMATE MULTICOMPONENT DISTILLATION METHODS
SIMULATION OF DISTILLATION PROCESSES
DEGREES OF FREEDOM AND DESIGN VARIABLES
DISTILLATION SYSTEMS
ENHANCED DISTILLATION
PETROLEUM AND COMPLEX-MIXTURE DISTILLATION
BATCH DISTILLATION
14. Section 14: Equipment for Distillation, Gas Absorption, Phase Dispersion, and Phase Separation
CHAPTER PRELIMINARIES
INTRODUCTION
DESIGN OF GAS ABSORPTION SYSTEMS
EQUIPMENT FOR DISTILLATION AND GAS ABSORPTION: TRAY COLUMNS
EQUIPMENT FOR DISTILLATION AND GAS ABSORPTION: PACKED COLUMNS
OTHER TOPICS FOR DISTILLATION AND GAS ABSORPTION EQUIPMENT
PHASE DISPERSION
PHASE SEPARATION
15. Section 15: Liquid-Liquid Extraction and Other Liquid-Liquid Operations and Equipment
CHAPTER PRELIMINARIES
INTRODUCTION AND OVERVIEW
THERMODYNAMIC BASIS FOR LIQUID-LIQUID EXTRACTION
SOLVENT SCREENING METHODS
LIQUID DENSITY, VISCOSITY, AND INTERFACIAL TENSION
LIQUID-LIQUID DISPERSION FUNDAMENTALS
PROCESS FUNDAMENTALS AND BASIC CALCULATION METHODS
CALCULATION PROCEDURES
LIQUID-LIQUID EXTRACTION EQUIPMENT
PROCESS CONTROL CONSIDERATIONS
LIQUID-LIQUID PHASE SEPARATION EQUIPMENT
EMERGING DEVELOPMENTS
16. Section 16: Adsorption and Ion Exchange
CHAPTER PRELIMINARIES
DESIGN CONCEPTS
ADSORBENTS AND ION EXCHANGERS
SORPTION EQUILIBRIUM
CONSERVATION EQUATIONS
RATE AND DISPERSION FACTORS
BATCH ADSORPTION
FIXED-BED TRANSITIONS
CHROMATOGRAPHY
PROCESS CYCLES
EQUIPMENT
17. Section 17: Gas–Solid Operations and Equipment
CHAPTER PRELIMINARIES
FLUIDIZED-BED SYSTEMS
GAS–SOLIDS SEPARATIONS
18. Section 18: Liquid-Solid Operations and Equipment
CHAPTER PRELIMINARIES
MIXING AND PROCESSING OF LIQUIDS AND SOLIDS
MIXING OF VISCOUS FLUIDS, PASTES, AND DOUGHS
CRYSTALLIZATION FROM SOLUTION
CRYSTALLIZATION FROM THE MELT
LEACHING
GRAVITY SEDIMENTATION OPERATIONS
FILTRATION
CENTRIFUGES
EXPRESSION
SELECTION OF A SOLIDS-LIQUID SEPARATOR
19. Section 19: Reactors
CHAPTER PRELIMINARIES
INTRODUCTION
REACTOR CONCEPTS
RESIDENCE TIME DISTRIBUTION AND MIXING
SINGLE-PHASE REACTORS
FLUID–SOLID REACTORS
FLUID–FLUID REACTORS
SOLIDS REACTORS
MULTIPHASE REACTORS
SOME CASE STUDIES
20. Section 20: Bioreactions and Bioprocessing
CHAPTER PRELIMINARIES
BIOENGINEERING OVERVIEW AND CONCEPTS
BIOREACTORS AND UPSTREAM PROCESSES
DOWNSTREAM PROCESSING: SEPARATION AND PURIFICATION
PRODUCT QUALITY ATTRIBUTE CONTROL
EMERGING BIOPHARMACEUTICAL AND BIOPROCESS TECHNOLOGIES AND TRENDS
21. Section 21: Solids Processing and Particle Technology
CHAPTER PRELIMINARIES
PARTICLE CHARACTERIZATION
BULK SOLIDS FLOW AND HOPPER DESIGN
SOLIDS MIXING
PNEUMATIC CONVEYING OF SOLIDS
SCREENING
SIZE REDUCTION
MODELING AND SIMULATION OF GRINDING PROCESSES
CRUSHING AND GRINDING EQUIPMENT: DRY GRINDING—IMPACT AND ROLLER MILLS
CRUSHING AND GRINDING EQUIPMENT: FLUID-ENERGY OR JET MILLS
CRUSHING AND GRINDING EQUIPMENT: WET/DRY GRINDING—MEDIA MILLS
SIZE ENLARGEMENT
FEEDING, METERING, AND DOSING
22. Section 22: Waste Management
CHAPTER PRELIMINARIES
INTRODUCTION TO WASTE MANAGEMENT AND REGULATORY OVERVIEW
POLLUTION PREVENTION
GREEN CHEMISTRY AND GREEN ENGINEERING
AIR POLLUTION MANAGEMENT OF STATIONARY SOURCES
INDUSTRIAL WASTEWATER MANAGEMENT
MANAGEMENT OF SOLID WASTES
23. Section 23: Process Safety
CHAPTER PRELIMINARIES
INTRODUCTION TO PROCESS SAFETY
CASE HISTORIES
HAZARDOUS MATERIALS AND CONDITIONS
INHERENTLY SAFER DESIGN AND RELATED CONCEPTS
PROCESS SAFETY ANALYSIS
CONSEQUENCE MODELS
SAFETY EQUIPMENT, PROCESS DESIGN, AND OPERATION
24. Section 24: Energy Resources, Conversion, and Utilization
CHAPTER PRELIMINARIES
INTRODUCTION
FUELS
HEAT GENERATION
PINCH ANALYSIS
ENERGY RECOVERY
THERMAL ENERGY CONVERSION AND UTILIZATION
25. Section 25: Materials of Construction
CHAPTER PRELIMINARIES
INTRODUCTION
CORROSION FUNDAMENTALS
CORROSION PREVENTION
CORROSION-TESTING METHODS
ALLOY DESIGNATIONS
FERRITIC STEELS
STAINLESS STEELS
NICKEL ALLOYS
REACTIVE METALS
OTHER METALS AND ALLOYS
LOW-TEMPERATURE AND CRYOGENIC MATERIALS
NONMETALLIC MATERIALS FOR CORROSION CONTROL


Приватный текст
Зарегистрироваться
Написать 5 сообщений (5 осталось)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 23.06.2019 - 11:59
Сообщение #2


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 17665
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 32392 раз(а)



Dr. Don W. Green, Dr. Marylee Z. Southard - Perry's Chemical Engineers' Handbook, 9th Edition

McGraw-Hill Education, 2019
pdf, 5293 pages, english
ISBN: 978-0-07-183409-4




The gold standard for chemical engineering information - from the fundamentals to the state of the art. This industry-standard resource, first published in 1934, has equipped generations of engineers and chemists with vital information, data, and insights. Thoroughly revised to reflect the latest technological advances and processes, Perry's Chemical Engineers' Handbook, Ninth Edition, is indispensable for unsurpassed coverage of every aspect of chemical engineering. New features include coverage of bioreactions and bioprocessing, a practical presentation of thermodynamics fundamentals, and new and updated chemical property data. A must-have for students and professionals in every stage of their careers, Perry's provides all the technical details you'll need in a well-organized format: You'll find comprehensive material on chemical processes, reactor modeling, biological processes, biochemical and membrane separation, process and chemical plant safety, and much more. This fully updated edition covers: • Unit Conversion Factors and Symbols • Physical and Chemical Data (including prediction and correlation of physical properties) • Mathematics (including differential and integral calculus, statistics , optimization) • Thermodynamics • Heat and Mass Transfer • Fluid and Particle Dynamics • Reaction Kinetics • Process Control and Instrumentation • Process Economics • Transport and Storage of Fluids • Heat-Transfer Operations and Equipment • Psychrometry, Evaporative Cooling, and Solids Drying • Distillation • Gas Absorption and Gas-Liquid System Design • Liquid-Liquid Extraction Operations and Equipment • Adsorption and Ion Exchange • Gas-Solid Operations and Equipment • Liquid-Solid Operations and Equipment • Solid-Solid Operations and Equipment • Chemical Reactors • Bio-based Reactions and Processing • Waste Management (including air, wastewater, and solid waste management) • Process Safety (including inherently safer design) • Energy Resources, Conversion, and Utilization • Materials of Construction.

link.
320 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение

Ответить в данную темуНачать новую тему
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 



RSS Текстовая версия Сейчас: 17.07.2019 - 18:15