DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD |
Здравствуйте, гость ( Вход | Регистрация )
Here You Can Support Our Work and .:LavTeaM:. Services |
DotSoft ToolPac v23.0.0.0, productivity tools for AutoCAD |
5.04.2016 - 09:02
Сообщение
#441
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21838 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55792 раз(а) |
DotSoft ToolPac v23.0.0.0
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: https://dotsoft.com/toolpac.htm + = link. 47 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
30.07.2019 - 10:31
Сообщение
#442
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 968 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2958 раз(а) |
ToolPac 19.0.2.1
» Click to show Spoiler - click again to hide... «
don't forget to apply patch at above post |
|
|
1.08.2019 - 15:40
Сообщение
#443
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21838 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55792 раз(а) |
DotSoft ToolPac v19.0.2.1
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 33 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
2.10.2019 - 09:38
Сообщение
#444
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 968 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2958 раз(а) |
finally Dotsoft update default toolpac installer with version 19. You can use main link to download.
» Click to show Spoiler - click again to hide... «
Сообщение отредактировал Slinger - 2.10.2019 - 09:38 |
|
|
26.11.2019 - 16:43
Сообщение
#445
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 968 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2958 раз(а) |
ToolPac 19.0.2.8
» Click to show Spoiler - click again to hide... «
Apply patch. Added support for BricsCAD 20
Прикрепленные файлы
|
|
|
27.11.2019 - 01:28
Сообщение
#446
|
|
Свой человек Группа: Пользователи Пользователь №: 102276 Сообщений: 531 Регистрация: 8.12.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 1396 раз(а) |
install above 19.0.2.6?
OR 19.0.2.1 |
|
|
27.11.2019 - 05:40
Сообщение
#447
|
|
Завсегдатай Группа: Пользователи Пользователь №: 36982 Сообщений: 161 Регистрация: 21.06.2006 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 368 раз(а) |
|
|
|
27.11.2019 - 05:45
Сообщение
#448
|
|
Свой человек Группа: Пользователи Пользователь №: 102276 Сообщений: 531 Регистрация: 8.12.2008 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 1396 раз(а) |
PLEASE UPLOAD 9.0.2.6 INSTALLER |
|
|
27.11.2019 - 08:40
Сообщение
#449
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21838 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55792 раз(а) |
andmail, GK.000, simply their offsite is down.
|
|
|
27.11.2019 - 09:18
Сообщение
#450
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 968 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2958 раз(а) |
19.0.2.6
» Click to show Spoiler - click again to hide... «
Install it firstly. It's official installer. Then copy files from 19.0.2.8 update. And then apply patch. Old patch works too, but it's not supports BricsCAD v20 Сообщение отредактировал Slinger - 27.11.2019 - 09:21 |
|
|
27.11.2019 - 20:01
Сообщение
#451
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21838 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55792 раз(а) |
DotSoft ToolPac v19.0.2.8
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 33 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
28.11.2019 - 08:52
Сообщение
#452
|
|
Завсегдатай Группа: Пользователи Пользователь №: 12575 Сообщений: 203 Регистрация: 24.03.2005 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 34 раз(а) |
К сожалению symantec удаляет dotsoft.toolpac.19.0-patch.exe, а управлять его действиями не можем - у нас пользовательские права.......
|
|
|
28.11.2019 - 11:26
Сообщение
#453
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 968 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2958 раз(а) |
kserg, попросите сис. админов внести файл в исключение или поставить плагин самим. Или купить плагин. Вариантов для решения целый вагон.
|
|
|
14.01.2020 - 11:41
Сообщение
#454
|
|
Новичок Группа: Пользователи Пользователь №: 67165 Сообщений: 11 Регистрация: 6.08.2007 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 0 раз(а) |
|
|
|
20.02.2020 - 22:12
Сообщение
#455
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 968 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2958 раз(а) |
|
|
|
23.02.2020 - 18:06
Сообщение
#456
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21838 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55792 раз(а) |
DotSoft ToolPac v19.0.3.1
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 33 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
11.05.2020 - 10:27
Сообщение
#457
|
|
Прохожий Группа: Пользователи Пользователь №: 104529 Сообщений: 44 Регистрация: 9.01.2009 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 6 раз(а) |
toolpac 20 for autocad 2021...is available
any luck we going to get it? |
|
|
14.05.2020 - 20:46
Сообщение
#458
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 968 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2958 раз(а) |
20.0.0.0
No offical installer. So use update files and overwrite above 19.* version » Click to show Spoiler - click again to hide... «
Use old patch Сообщение отредактировал Slinger - 14.05.2020 - 20:46 |
|
|
15.05.2020 - 08:29
Сообщение
#459
|
|
Живущий здесь Группа: Модераторы Пользователь №: 154947 Сообщений: 2215 Регистрация: 17.07.2012 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 3300 раз(а) |
In Autocad 2021
|
|
|
2.06.2020 - 20:03
Сообщение
#460
|
|
Торговец чёрным деревом Группа: Админы Пользователь №: 3953 Сообщений: 21838 Регистрация: 1.08.2003 Из: Москва Загружено: 1.2 TB Скачано: 360.63 мегабайт Коэффициент: 3,489.32 Спасибо сказали: 55792 раз(а) |
DotSoft ToolPac v20.0.0.0
In the never ending quest for faster AutoCAD/BricsCAD systems, users go the extra mile to purchase the fastest hardware. Faster processors, graphics cards, etc., are implemented in an attempt to speed up the processing of drawings. These improvements come at great expense and only provide a marginal gain in the amount of time it takes to actually complete a drawing. This expensive hardware is often underutilized as the operator wastes time doing repetitive tasks in the struggle to finalize a drawing. If you do only one upgrade to your system this year, it should be the implementation of productivity software. Our ToolPac product was designed to eliminate the numerous bottlenecks in AutoCAD and BricsCAD. It contains over 750 functions designed with one purpose in mind, to save you time. ToolPac is in use today by thousands of architects, engineers, and designers! This comprehensive collection of productivity tools works with AutoCAD 2007 or higher (LT not supported) or BricsCAD v12 Pro or higher. It works equally well in all environments, including Architectural, Engineering, Civil, Mechanical and Design. More info: http://dotsoft.com/toolpac.htm + = link. 46 Mb (RAR5, incl. 3% - info for restoration purpose) |
|
|
2.10.2020 - 22:10
Сообщение
#461
|
|
Активный пользователь Группа: Модераторы Пользователь №: 143610 Сообщений: 968 Регистрация: 7.03.2011 Загружено: байт Скачано: байт Коэффициент: --- Спасибо сказали: 2958 раз(а) |
20.0.0.2
» Click to show Spoiler - click again to hide... «
New patch. Added support for IntellCAD 10.* Сообщение отредактировал Slinger - 2.10.2020 - 22:11
Прикрепленные файлы
|
|
|
Текстовая версия | Сейчас: 18.04.2024 - 14:24 |