IPB

Здравствуйте, гость ( Вход | Регистрация )

9 страниц V  « < 2 3 4 5 6 > »   
Ответить в данную темуНачать новую тему
Техническоя литература, Только здесь ссылки на библиотеки
chemistry
сообщение 5.05.2017 - 08:52
Сообщение #61


Прохожий
Иконка группы

Группа: Пользователи
Пользователь №: 190226
Сообщений: 25
Регистрация: 8.04.2017
Из: Нижний Новгород
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 6 раз(а)



www.twirpx.com.
Библиотека-форум книг разнообразного направления, в том числе научно-технического, аудиокниги, электронные версии. Необходима регистрация, она бесплатна, скачивание книг тоже.
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 31.05.2017 - 22:48
Сообщение #62


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



KAMAL I.M. AL-MALAH - ASPEN PLUS Chemical Engineering Applications

Wiley, 2017
pdf, 623 pages, english
ISBN 978-1-119-13123-6




Kamal Al-Malah, is professor of chemical engineering at Higher Colleges of Technology, United Arab Emirates and former chairman of the chemical engineering department at the University of Hail in Saudi Arabia. He holds B.S., M.S., and Ph.D. degrees in chemical/biochemical engineering. Dr. Al-Malah graduated from Oregon State University in 1993 and his area of specialty deals with mathematical modeling, optimization, simulation, and computer-aided design.

Aspen Plusis a process flowsheet simulator. A flowsheet simulator is a computer software that is used to quantitatively model a chemical processing plant. In general, a chemical processing plant is comprised of the core reactor unit and different additional unit operations, in the form of pre- and post-treatment steps, as well. In this regard, Aspen Plus is a very powerful tool that can be used to tackle different chemical process and unit operation calculation-based tasks, in the form of modeling, simulation, optimization, data regression, design specifications, sensitivity analysis, solids handling, dynamics and control, energy saving, safety compliance, and finally process economic analysis.

The book comprises 18 chapters. Each chapter, except the last chapter, constitutes a running tutorial that mainly covers one or more of common unit operations or chemical processes found in chemical industries. Moreover, the book has end-of-chapter contextual problems. The last chapter contains comprehensive problems (or term projects) that require an extensive knowledge of Aspen Plus features and tools that are already explained in previous chapters.

Overall, the book reflects the full-fledge nature ofAspen Plus implementation to versatile chemical process industries.

link.
21 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 12.06.2017 - 16:35
Сообщение #63


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Gunthar Pangaribuan - An Introduction to Excel for Civil Engineers

CreateSpace Independent Publishing, 2016
pdf, 387 pages, english
ISBN-10: 1537137719
ISBN-13: 978-1537137711




It's a must have standard engineering book that should have read many years ago. It addresses many articles that may not be covered by any Excel for engineering texts, such as step by step guides to create an application program and how to convert the steps into VBA code, how to perform matrix operations, macro for creating an engineering chart, a brief and simple guide to become an instant Excel-VBA programmer, and more... Also to be presented the depiction in AutoCAD program. Yes! AutoCAD is chosen because one of its advantages that relies on high drawing accuracy.

You will learn how to create a simple AutoCAD script file using Excel formulas and Excel-VBA. It is expected that you will be able to create simple Cartesian graph in AutoCAD, even you are an AutoCAD first time user! With the ease of working with Excel, coupled with benefit of the given examples in this book, it is expected to increase the interest of the reader to create new original application programs. Thus, each model or even a specific calculation will be an exciting challenge for a programming job is already enjoyable. Happy Excel programming!

link.
12 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 8.08.2017 - 23:26
Сообщение #64


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



John Siegenthaler - Modern Hydronic Heating
for residential and light commercial buildings


Delmar, 2012
pdf, 746 pages, english
ISBN-13: 978-1428335158
ISBN-10: 1428335153




This book, like its preceding editions, is about state-of-the-art hydronic heating systems for residential and light commercial buildings. It was written to provide comprehensive, contemporary, and unbiased information for heating technology students, as well as heating professionals.

link.
57 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 13.12.2017 - 07:43
Сообщение #65


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Rex Miller, Mark Richard Miller, Harry Stewart - Audel Pumps & Hydraulics, 6th Edition

Wiley, 2004
pdf, 577 pages, english
ISBN: 978-0-7645-7116-9




Pumps and hydraulic equipment are now used in more facets of industry than ever before. Whether you are a pump operator or you encounter pumps and hydraulic systems through your work in another skilled trade, a basic knowledge of the practical features, principles, installation, and maintenance of such systems is essential. You'll find it all here, fully updated with real-world examples and 21st-century applications.
- Learn to install and service pumps for nearly any application.
- Understand the fundamentals and operating principles of pump controls and hydraulics.
- Service and maintain individual pumping devices that use smaller motors.
- See how pumps are used in robotics, taking advantage of hydraulics to lift larger, heavier loads.
- Handle new types of housings and work with the latest electronic controls.
- Know the appropriate servicing schedule for different types of pumping equipment.
- Install and troubleshoot special-service pumps.

link.
7 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
r1203
сообщение 25.01.2018 - 09:41
Сообщение #66


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 95181
Сообщений: 16
Регистрация: 10.09.2008
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 5 раз(а)



ISBN 978-5-93093-971-2
Прикрепленный файл  __________________________________________________________________________________________________________2013l.jpg ( 403.81 килобайт ) Кол-во скачиваний: 19


Тяпин А.Г.
Расчет сооружений на сейсмические воздействия с учетом взаимодействия с грунтовым основанием. Научное издание. – М.: Издательство АСВ, 2013. – 392 стр.
В монографии описывается сравнительная молодая отрасль строительной механики – динамический расчет взаимодействия сооружений с основанием при сейсмических воздействиях (SoilStructure Interaction, сокращенно SSI). Обобщается накопленный опыт учета SSI при проектировании ответственных сооружений АЭС, в том числе за рубежом по международным нормам. Разбираются особенности основных используемых подходов. Приводятся примеры из практики московского института «Атомэнергопроект» – ведущей организации по проектированию АЭС в России. Книга может служить пособием для студентов, аспирантов и инженеров, занимающихся расчетами сооружений на сейсмические воздействия.

http://dropmefiles.com/dXtSf

ISBN 978-5-4323-0011-9
Прикрепленный файл  _______________________________________________________________________________________________.___________________________2014l.jpg ( 594.54 килобайт ) Кол-во скачиваний: 16


Тяпин А.Г.
Учет взаимодействия сооружений с основанием при расчетах на сейсмические воздействия. Руководство по расчетам. Научное издание. – М.: Издательство АСВ, 2014 г. – 136 с.
Расчет динамического взаимодействия сооружений с основанием – обязательный этап расчета ответственных сооружений на сейсмические воздействия. В руководстве представлена технологическая
схема расчетов, сложившаяся за последние годы в ОАО «Атомэнергопроект» и прошедшая международную экспертизу. Книга рассчитана на проектировщиков, а также на студентов и аспирантов, работающих в области сейсмостойкости сооружений.

http://dropmefiles.com/dXtSf

Сообщение отредактировал r1203 - 4.05.2018 - 03:29
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
tygra123
сообщение 6.02.2018 - 20:28
Сообщение #67


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 178818
Сообщений: 5
Регистрация: 20.07.2015
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 1 раз(а)



Цитата(r1203 @ 25.01.2018 - 09:41) *
ISBN 978-5-93093-971-2

Тяпин А.Г.
Расчет сооружений на сейсмические воздействия с учетом взаимодействия с грунтовым основанием. Научное издание. – М.: Издательство АСВ, 2013. – 392 стр.


http://dropmefiles.com/MAqWP

ISBN 978-5-4323-0011-9

Тяпин А.Г.
Учет взаимодействия сооружений с основанием при расчетах на сейсмические воздействия. Руководство по расчетам. Научное издание. – М.: Издательство АСВ, 2014 г. – 136 с.

http://dropmefiles.com/mWnjV

Обновите ссылки, пожалуйста!
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 20.03.2018 - 20:32
Сообщение #68


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Pinliang Dong, Qi Chen - LiDAR Remote Sensing and Applications

CRC, 2018
pdf, 221 pages, english
ISBN: 978-1-4822-4301-7




This is a unique book in that it smoothly combines LiDAR principles, data processing methods, applications, and hands-on practices, following an overview of remote sensing. An index map of LiDAR data and a list of abbreviations are also included to improve the readability of the book. For forest applications, readers can find examples such as creating leaf-on and leaf-off canopy height models in Susquehanna Shale Hills, PA; identifying disturbances from lightning and hurricane in mangrove forests in Florida; and estimating aboveground biomass in tropical forests in Ghana. For urban applications, readers can see examples such as road extraction, powerline corridor mapping, and population estimation in Denton, TX; parcel-based building change detection in Surrey, Canada; and road blockage detection in Port-au-Prince after the 2010 Haiti earthquake. For geoscience applications, readers can explore samples such as measuring dune migration rates in White Sands, NM; analysis of offset channels associated with the San Andreas Fault in California; and trend surface analysis and visualization of rock layers in Raplee Ridge, UT. Undergraduate and graduate students will find that the 11 step-by-step GIS projects with LiDAR data can really help them understand LiDAR data processing, analysis, and applications, while professionals and researchers will benefit from various topics on LiDAR remote sensing and applications, along with over 500 references in the book.

link.
12 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 20.03.2018 - 21:17
Сообщение #69


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Balgaisha Mukanova, Igor Modin - The Boundary Element Method in Geophysical Survey

Springer, 2018
pdf, 162 pages, english
ISBN: 978-3-319-72907-7




This volume is devoted to the application of the integral equations method (IEM) and boundary elements method (BEM) to problems involving the sounding of geological media using direct current (DC). Adaptive mesh generation algorithms and numerical methods for solving a system of integral equations are discussed. Integral equations for the media, which contains piecewise linear contact boundaries, immersed local inclusions, and subsurface relief, are derived and solved numerically. Describes in detail the application of the BEM and IEM to 2.5D direct problems using ERT for geological media with a complex structure and having a large number of internal contact boundaries. Provides algorithms of grid generation of the boundaries that are adapted to the geometry of the media, the surface relief and the measurements of electrode arrays. Discusses the application of the BEM to 3D sounding problems using the ERT method. Illustrates the applications of inversion programs to synthetic data generated using the BEM in comparison with the original model and discusses the quality of the associated interpretation

link.
4 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 20.04.2018 - 22:26
Сообщение #70


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



VDI Heat Atlas, Second Edition

Springer, 2010
pdf, 1609 pages, english
ISBN: 978-3-540-77876-9




The VDI-Warmeatlas or VDI Heat Atlas has a long-lasting history and it can be considered as a standard book for heat exchanger and process engineering equipment design. It is not conceived as a textbook presenting an overall view of the theoretical or experimental findings in heat transfer sciences. The aim was and is to present and explain the state of the art of engineering methods to solve industrially relevant heat transfer problems for apparatus design and process modeling. The first German edition was published in 1963. The sixth German edition was translated into English to meet the demands of the more and more internationally acting industry. This first English edition was published in 1992. Since then, the German edition was regularly updated until the tenth edition published in 2006. In view of today’s globally acting industry, the editorial board felt the necessity to revise the English edition in order to account for the most recent state of our knowledge. Instead of only translating the latest German edition, we preferred restructuring it at the same time because this also enabled us to include new subjects and to update methods according to the recent state of the art. This new structure will also serve as a basis for the forthcoming German edition. On behalf of the editorial board, I express my sincere thanks to the authors of the various sections for their contributions and kind cooperation. The editorial work was coordinated and assisted by Mrs. Sigrid Cuneus from Springer-Verlag, Berlin. We are indebted to her for the efficient work and pleasant collaboration. We are also grateful to Mrs. Tina Shelton from the Reference and Database Publishing group, Springer Reference Editorial, India, who handled the editorial workflow.

link.
40 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 21.04.2018 - 18:33
Сообщение #71


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Heat Exchanger Design Handbook, 1983

Hemisphere Publishing, 1983
pdf, 2305 pages, english
ISBN: 3-1841-9080-3




The Heat Exchanger Design Handbook (HEDH) had its origins in the 1970s when, under the chairmanship of Professor Ernst Schlilnder, a group of us began to discuss the possibility of a handbook dealing with all aspects of heat exchanger design and operation including the basic design methodology, the associated heat transfer and fluid flow technology and the physical data required for design. This led to the adoption of a structure consisting of 5 Parts as follows:

- Part 1: Heat exchanger theory and generic application technology
- Part 2: Fluid mechanics and heat transfer
- Part 3: Thermal and hydraulic design of heat exchangers
- Part 4: Mechanical design of heat exchangers
- Part 5: Physical properties

The first (loose-leaf) edition of HEDH was published in 1983 by Hemisphere Publishing Corporation and contained about 1500 pages of new material structured as indicated above; the reception from reviewers and users was very positive and this encouraged the publishers to publish a series of five Supplements of additional material for inclusion in the loose-leaf binders. This process added around 500 pages to the material. In order to achieve a more systematic updating, a quarterly update journal Heat Exchanger Design Update (HEDU) was started in 1983 which carried new material for HEDH.

link.
46 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
r1203
сообщение 4.05.2018 - 03:36
Сообщение #72


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 95181
Сообщений: 16
Регистрация: 10.09.2008
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 5 раз(а)



Цитата(tygra123 @ 7.02.2018 - 00:28) *
Обновите ссылки, пожалуйста!

Обновил

Сообщение отредактировал r1203 - 4.05.2018 - 03:37
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
DMS-chiii
сообщение 3.06.2018 - 15:15
Сообщение #73


Из местных
Иконка группы

Группа: Пользователи
Пользователь №: 100128
Сообщений: 59
Регистрация: 12.11.2008
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 6 раз(а)



Опять умерли линки r1203,
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Benckis
сообщение 30.06.2018 - 14:39
Сообщение #74


Из местных
Иконка группы

Группа: Пользователи
Пользователь №: 160559
Сообщений: 54
Регистрация: 12.04.2013
Из: Moon
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 8 раз(а)



Hello.

possible can someone add this book smile.gif

Big Data and Differential Privacy: Analysis Strategies for Railway Track Engineering
Nii O. Attoh-Okine
ISBN: 978-1-119-22904-9
Aug 2017
272 pages

https://www.wiley.com/en-gb/Big+Data+and+Differential+Privacy%3A+Analysis+Strategies+for+Railway+Track+Engineering-p-9781119229049
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 7.07.2018 - 13:33
Сообщение #75


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Donald W. Knight, Caroline Hazlewood, Rob Lamb, Paul G. Samuels, Koji Shiono -
Practical Channel Hydraulics: Roughness, Conveyance and Afflux
2nd Edition


CRC Press, 2018
pdf, 634 pages, english
ISBN: 978-1-138-06858-2 (Hbk)
ISBN: 978-1-315-15777-1 (eBook)




Practical Channel Hydraulics is a technical guide for estimating flood water levels in rivers using the innovative software known as the Conveyance and Afflux Estimation System (CES-AES). The stand alone software is freely available at HR Wallingford’s website www.river-conveyance.net. The conveyance engine has also been embedded within industry standard river modelling software such as InfoWorks RS and Flood Modeller Pro. This 2nd Edition has been greatly expanded through the addition of Chapters 6-8, which now supply the background to the Shiono and Knight Method (SKM), upon which the CES-AES is largely based.

With the need to estimate river levels more accurately, computational methods are now frequently embedded in flood risk management procedures, as for example in ISO 18320 (‘Determination of the stage-discharge relationship’), in which both the SKM and CES feature. The CES-AES incorporates five main components: A Roughness Adviser, A Conveyance Generator, an Uncertainty Estimator, a Backwater Module and an Afflux Estimator. The SKM provides an alternative approach, solving the governing equation analytically or numerically using Excel, or with the short FORTRAN program provided.

Special attention is paid to calculating the distributions of boundary shear stress distributions in channels of different shape, and to appropriate formulations for resistance and drag forces, including those on trees in floodplains. Worked examples are given for flows in a wide range of channel types (size, shape, cover, sinuosity), ranging from small scale laboratory flumes (Q = 2.0 1s-1) to European rivers (~2,000 m3s-1), and large-scale world rivers (> 23,000 m3s-1), a ~ 107 range in discharge. Sites from rivers in the UK, France, China, New Zealand and Ecuador are considered.

Topics are introduced initially at a simplified level, and get progressively more complex in later chapters. This book is intended for post graduate level students and practising engineers or hydrologists engaged in flood risk management, as well as those who may simply just wish to learn more about modelling flows in rivers.

link.
149 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Benckis
сообщение 10.07.2018 - 17:35
Сообщение #76


Из местных
Иконка группы

Группа: Пользователи
Пользователь №: 160559
Сообщений: 54
Регистрация: 12.04.2013
Из: Moon
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 8 раз(а)



Need Book.

Best Practice in Track Maintenance, Vol. 1: Infrastructure Management
pdf, 264 pages, english
ISBN 978-3-96245-155-4

https://www.pmcmedia.com/neuerscheinungen/251/best-practice-in-track-maintenance-vol.-1-infrastructure-management
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
awsed
сообщение 1.02.2019 - 20:37
Сообщение #77


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 70943
Сообщений: 3
Регистрация: 13.09.2007
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 0 раз(а)



The best maritime and offshore library

https://www.libramar.net/

Перейти в начало страницы
Вставить ник
+Цитировать сообщение
vanekmne
сообщение 14.04.2019 - 18:37
Сообщение #78


Прохожий
Иконка группы

Группа: Пользователи
Пользователь №: 162134
Сообщений: 38
Регистрация: 22.07.2013
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 8 раз(а)



Цитата(r1203 @ 25.01.2018 - 09:41) *
ISBN 978-5-93093-971-2
Прикрепленный файл  __________________________________________________________________________________________________________2013l.jpg ( 403.81 килобайт ) Кол-во скачиваний: 19


Тяпин А.Г.
Расчет сооружений на сейсмические воздействия с учетом взаимодействия с грунтовым основанием. Научное издание. – М.: Издательство АСВ, 2013. – 392 стр.
В монографии описывается сравнительная молодая отрасль строительной механики – динамический расчет взаимодействия сооружений с основанием при сейсмических воздействиях (SoilStructure Interaction, сокращенно SSI). Обобщается накопленный опыт учета SSI при проектировании ответственных сооружений АЭС, в том числе за рубежом по международным нормам. Разбираются особенности основных используемых подходов. Приводятся примеры из практики московского института «Атомэнергопроект» – ведущей организации по проектированию АЭС в России. Книга может служить пособием для студентов, аспирантов и инженеров, занимающихся расчетами сооружений на сейсмические воздействия.

http://dropmefiles.com/dXtSf

ISBN 978-5-4323-0011-9
Прикрепленный файл  _______________________________________________________________________________________________.___________________________2014l.jpg ( 594.54 килобайт ) Кол-во скачиваний: 16


Тяпин А.Г.
Учет взаимодействия сооружений с основанием при расчетах на сейсмические воздействия. Руководство по расчетам. Научное издание. – М.: Издательство АСВ, 2014 г. – 136 с.
Расчет динамического взаимодействия сооружений с основанием – обязательный этап расчета ответственных сооружений на сейсмические воздействия. В руководстве представлена технологическая
схема расчетов, сложившаяся за последние годы в ОАО «Атомэнергопроект» и прошедшая международную экспертизу. Книга рассчитана на проектировщиков, а также на студентов и аспирантов, работающих в области сейсмостойкости сооружений.

http://dropmefiles.com/dXtSf

Обновите пожалуйста!
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 21.06.2019 - 06:59
Сообщение #79


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Золотоносов Я.Д., Багоутдинова А.Г., Золотоносов А.Я - Трубчатые теплообменники. Моделирование, расчет

Лань, 2018
pdf, 270 pages, russian
ISBN 978-5-8114-3411-4




Монография посвящена описанию конструкций теплообменного оборудования, в том числе: трубчатых аппаратов с инновационными теплообменными элементами, змеевиковых теплообменных аппаратов типа «труба в трубе» с изменяющимся и неизменяющимся радиусом изгиба винтовой спирали проточной части теплообменных элементов, а также теплообменных устройств с вращающейся теплообменной поверхностью. В работе предложены математические модели сопряженного теплообмена в аппаратах рассматриваемого класса, разработанных на базе фундаментальных уравнений механики сплошной среды. Приведены результаты численных расчетов и экспериментальные данные, подтверждающие адекватность математических моделей. На базе экспериментальных и теоретических исследований предложены надежные методы инженерных расчетов современных аппаратов теплообмена. Монография предназначена для бакалавриата, магистратуры и аспирантуры по направлениям подготовки «Механика и математическое моделирование», «Теплоэнергетика и теплотехника», «Энергетическое машиностроение», «Ядерная энергетика и теплофизика», «Прикладная механика», «Техническая физика», «Химическая технология». Книга может быть полезна специалистам, занимающимся разработкой и проектированием высокоэффективных теплообменных аппаратов.

https://turbobit.net/5de0624gbd1y.html
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 26.06.2019 - 21:33
Сообщение #80


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Yang X.-S. - Introduction to Algorithms for Data Mining and Machine Learning

Academic Press, 2019
pdf, 188 pages, english
eBook ISBN: 9780128172179
Paperback ISBN: 9780128172162




This book introduces the essential ideas behind all key algorithms and techniques for data mining and machine learning, along with optimization techniques. Its strong formal mathematical approach, well selected examples, and practical software recommendations help readers develop confidence in their data modeling skills so they can process and interpret data for classification, clustering, curve-fitting and predictions. Masterfully balancing theory and practice, it is especially useful for those who need relevant, well explained, but not rigorous (proofs based) background theory and clear guidelines for working with big data.

https://turbobit.net/90ode4g0wcpn.html
Перейти в начало страницы
Вставить ник
+Цитировать сообщение

9 страниц V  « < 2 3 4 5 6 > » 
Ответить в данную темуНачать новую тему
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 



RSS Текстовая версия Сейчас: 28.03.2024 - 18:49
Ошибка работы драйвера БД

Ошибка при работе с базой данных

Возникла проблема при работе с базой данных.
Вы можете попробовать обновить эту страницу, нажав сюда