IPB

Здравствуйте, гость ( Вход | Регистрация )

12 страниц V  « < 6 7 8 9 10 > »   
Ответить в данную темуНачать новую тему
Строительное проектирование, Ссылки на литературу по теме.
Williams
сообщение 6.07.2012 - 22:48
Сообщение #141


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Михайлов А.М. - Основы расчета элементов строительных конструкций в примерах

Высшая школа, 1980
DJVU, 304 стр., russian


В книге на примерах из строительной практики рассматриваются современные методы расчета элементов конструкций на прочность, жесткость и устойчивость по предельным состояниям, что выгодно отличает ее от известных пособий по сопротивлению материалов. Примерам каждой темы предшествуют основные теоретические положения, расчетные формулы и методические указания. Разбор примеров проведен по возможности подробно, чтобы можно было проследить за ходом решения самостоятельно. Поэтому книга полезна в равной степени учащимся дневной, вечерней и заочной форм обучения.

http://depositfiles.com/files/roli6l0bj
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 18.07.2012 - 09:46
Сообщение #142


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



А.Б. Голышев, В.Я. Бачинский, В.П. Полищук, А.В. Харченко, И.В. Руденко - Проектирование железобетонных конструкций

Будiвельник, 1990
djvu, 544 стр., russian
ISBN: 5-7705-0015-8


В книге систематизированы методы расчета и конструирования элементов и конструкций из обычного и предварительно напряженного железобетона на все виды воздействий. Даны примеры проектирования сборных, сборно-монолитных и монолитных конструкций различных типов зданий и сооружений, необходимые графики, таблицы и другие вспомогательные материалы, облегчающие работу проектировщиков. Издание дополнено сведениями по свайным фундаментам и свойствам исходных материалов.

http://depositfiles.com/files/d6c9ps755
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 23.08.2013 - 21:04
Сообщение #143


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Russell C. Hibbeler - Engineering Mechanics: Statics (13th Edition)

Prentice Hall, 2012
pdf, 678 pages, english
ISBN-13: 978-0132915540


In his revision of Engineering Mechanics, R.C. Hibbeler empowers students to succeed in the whole learning experience. Hibbeler achieves this by calling on his everyday classroom experience and his knowledge of how students learn inside and outside of lecture. This text is ideal for civil and mechanical engineering professionals.

http://dfiles.ru/files/334cwmtbv
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 24.08.2013 - 00:36
Сообщение #144


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Bank L.C. - Composites for Construction: Structural Design with FRP Materials

Wiley, 2006
pdf, 560 pages, english


Composites for Construction is a one-of-a-kind guide to understanding fiber-reinforced polymers (FRP) and designing and retrofitting structures with FRP. Written and organized like traditional textbooks on steel, concrete, and wood design, it demystifies FRP composites and demonstrates how both new and retrofit construction projects can especially benefit from these materials, such as offshore and waterfront structures, bridges, parking garages, cooling towers, and industrial buildings. The code-based design guidelines featured in this book allow for demonstrated applications to immediately be implemented in the real world. Covered codes and design guidelines include ACI 440, ASCE Structural Plastics Design Manual, EUROCOMP Design Code, AASHTO Specifications, and manufacturer-published design guides. Procedures are provided to the structural designer on how to use this combination of code-like documents to design with FRP profiles. In four convenient sections, Composites for Construction covers:
- An introduction to FRP applications, products and properties, and to the methods of obtaining the characteristic properties of FRP materials for use in structural design.
- The design of concrete structural members reinforced with FRP reinforcing bars.
- Design of FRP strengthening systems such as strips, sheets, and fabrics for upgrading the strength and ductility of reinforced concrete structural members.
- The design of trusses and frames made entirely of FRP structural profiles produced by the pultrusion process.

http://dfiles.ru/files/rlktnbvpe
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 7.09.2013 - 07:15
Сообщение #145


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Хромец Ю.Н. - Конструкции из дерева и пластмасс

Академия, 2006
pdf, 304 pages, russian
ISBN: 5-7695-3221-1


В пособии изложены основы расчета и проектирования конструкций из дерева и пластмасс. Основное внимание обращено на расчеты и проектирование современных клееных конструкций, нашедших широкое применение в отечественной и зарубежной практике. Рассмотрены физико-механические свойства древесины и конструкционных пластмасс, виды соединений, методы расчета ограждающих и несущих конструкций — балок, стоек, арок, рам и ферм — с учетом новых норм и правил. Освещены основы технологии изготовления, монтажа и восстановления конструкций. Для студентов строительных специальностей вузов. Может быть использовано студентами средних профессиональных учебных заведений, а также инженерами-проектировщиками.

http://dfiles.ru/files/d0eppzke3
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 15.10.2013 - 07:45
Сообщение #146


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Холмянский М.М. - Контакт арматуры с бетоном

Стройиздат, 1981
djvu, 184 pages, russian


Книга посвящена сопротивлению бетона контактным воздействиям арматуры периодического профиля, подверженной воздействию кратковременных статических продольных усилий. Изложение основано на многолетних, проводимых во ВНИИЖелезобетона, экспериментальных и теоретических исследованиях, обобщенных в форме "технической теории сцепления". Главное внимание уделено раскрытию конструктивных возможностей теории и при решении основных задач расчёта железобетонных элементов. Её применение показано на примерах приложения к анализу процесса трещинообразования в железобетонных элементах приоднородном растяжении и изгибе, а также к расчёту развития трещин раскалывания. Предназначена для научных и инженерно-технических работников проектных и научно-исследовательских организаций.

http://dfiles.ru/files/puzx4gwlu



Алексеев С.Н. - Коррозия и защита арматуры в бетоне

Стройиздат, 1968
pdf, russian


Изложены результаты экспериментальных и теоретических работ в области коррозии и защиты арматуры.

http://dfiles.ru/files/557x7pgw6



Браун В. - Расход арматуры в железобетонных конструкциях

Стройиздат, 1993
djvu, 144 pages, russian


Книга содержит большое число диаграмм и таблиц, позволяющих быстро и точно определить расход стали, бетона и опалубки для железобетонных конструкций: плит, балок ребристых перекрытий, стен, фундаментов, колонн, полов. Предназначена для инженерно-технических работников научно-исследовательских и проектных организаций.

http://dfiles.ru/files/ckcprb0hf



Кикин А.И., Санжаровский Р.С, Трулль В.А. - Конструкции из стальных труб, заполненных бетоном

Стройиздат, 1974
pdf, 144 pages, russian

В книге содержатся данные о конструктивных формах сталетрубобетонных стержней, особенностях их работы под нагрузкой и способах изготовления. Приведены их технико-экономические характеристики. Описаны результаты теоретических и экспериментальных исследований работы трубобетонных стержней при центральном и внецентренном сжатии. Рассматривается влияние ползучести бетона на несущую способность стержней. Излагаются разработанные авторами практические методы расчета трубобетонных стержней на устойчивость. Даны примеры расчета.

http://dfiles.ru/files/w4qdpf53g
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
rabotyga
сообщение 4.02.2014 - 18:44
Сообщение #147


Живущий здесь
Иконка группы

Группа: Модераторы
Пользователь №: 11849
Сообщений: 1804
Регистрация: 13.03.2005
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 217 раз(а)



Жилые и общественные здания. Краткий справочник инженера-конструктора.
Приватный текст
Быть пользователем с именем p=0
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 30.03.2015 - 07:23
Сообщение #148


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Большаков В.П., Бочков А.Л. - Основы 3D-моделирования. Изучаем работу в AutoCAD, КОМПАС-3D, SolidWorks, Inventor

Питер, 2013
pdf, 304 pages, russian
ISBN: 978-5-496-00041-3




Инженерная компьютерная графика является одной из наиболее интенсивно развивающихся отраслей технических знаний. Современные CAD-подсистемы, входящие в состав интегрированных САD/CAM/CAE-систем (Computer Aided Manufactoring/Engineering — поддержанное компьютером конструирование/изготовление/инженерная деятельность), и системы твердотельного параметрического моделирования механических объектов, отражающие последние достижения инженерной компьютерной графики, представляют собой наиболее важные разработки в области новых технологий по автоматизации деятельности инженеров, конструкторов и технологов.

В данной книге приведены материалы, позволяющие ускорить освоение особенностей трехмерных редакторов четырех наиболее распространенных в сфере образования САD-cистем: Компас-3D, SolidWorks, Autodesk Inventor и Autodesk AutoCAD.

В книге представлены:
- описания этапов создания в перечисленных системах твердотельных моделей, ассоциативных чертежей и спецификаций нескольких сборочных единиц. Ассоциативные чертежи, созданные по 3D-технологии, характеризуются тем, что все виды плоского чертежа связаны так, что изменения в модели приводят к изменению изображения в каждом виде.
- описание приемов работы с 3D-библиотеками стандартных изделий.

Издание предназначено для начинающих пользователей САПР. Рекомендовано учебно-методическим объединением вузов Российской Федерации по образованию в области радиотехники, электроники, биомедицинской техники и автоматизации в качестве учебного пособия для студентов высших учебных заведений, обучающихся по направлению 211000 "Конструирование и технологии электронных средств".

http://dfiles.ru/files/basi8adsf
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
hldd3n
сообщение 20.10.2015 - 14:37
Сообщение #149


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 177089
Сообщений: 14
Регистрация: 17.04.2015
Из: Bulgaria
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 2 раз(а)



Спасибо !!! rolleyes.gif
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
sketchman
сообщение 17.06.2016 - 08:44
Сообщение #150


Новичок
Иконка группы

Группа: Пользователи
Пользователь №: 178961
Сообщений: 1
Регистрация: 29.07.2015
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 0 раз(а)



Спасибо, за 3д моделирование, очень хорошая книга.
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 16.07.2017 - 11:31
Сообщение #151


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Thomas T. C. Hsu and Y. L. Mo - Unified Theory Of Concrete Structures

Wiley, 2010
pdf, 520 pages, english
ISBN: 978-0-470-68874-8




Unified Theory of Concrete Structures develops an integrated theory that encompasses the various stress states experienced by both RC & PC structures under the various loading conditions of bending, axial load, shear and torsion. Upon synthesis, the new rational theories replace the many empirical formulas currently in use for shear, torsion and membrane stress.

The unified theory is divided into six model components: a) the struts-and-ties model, b ) the equilibrium (plasticity) truss model, c) the Bernoulli compatibility truss model, d) the Mohr compatibility truss model, e) the softened truss model, and f) the softened membrane model. Hsu presents the six models as rational tools for the solution of the four basic types of stress, focusing on the significance of their intrinsic consistencies and their inter-relationships. Because of its inherent rationality, this unified theory of reinforced concrete can serve as the basis for the formulation of a universal and international design code.
- Includes an appendix and accompanying website hosting the authors’ finite element program SCS along with instructions and examples
- Offers comprehensive coverage of content ranging from fundamentals of flexure, shear and torsion all the way to non-linear finite element analysis and design of wall-type structures under earthquake loading.
- Authored by world-leading experts on torsion and shear

link.
8 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 23.01.2018 - 22:06
Сообщение #152


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Frantisek Wald - Benchmark cases for advanced design of structural steel connections!

Ceska technika, 2016
pdf, 188 pages, english
ISBN: 978-80-01-05826-8




he CBFEM (component-based finite element model) is a new method to analyze and design connections of steel structures. The design focused CM (component model) is compared to FEM (finite elements models). The publication introduces Benchmark Cases for Validation and Verification procedures of structural steel joints. The hierarchy of the System response quantity is prepared for welded and bolted connections as well as for column bases. Each Benchmark Case starts with the task description and includes results of prediction by the analytical model according to EN 1993-1-5, references to experiments, validated model and numerical experiments, results of prediction by design Finite Element Analyses described in terms of global behavior and verification of resistance. At the end of the publication, the reader may check his calculation on Benchmark cases prepared for the particular joint. Finite Element Analyses is a current step in design of steel connections, which allows to predict the generally loaded joints with a complex geometry with the same efficiency and accuracy as the traditionally designed connections based on the best engineering practice. Implementation of the FEA models for the structural steel detailing creates the qualitative step as we may see in other areas of engineering.

link.
21 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
en_boy
сообщение 24.01.2018 - 17:56
Сообщение #153


Завсегдатай
Иконка группы

Группа: Пользователи
Пользователь №: 130706
Сообщений: 351
Регистрация: 17.01.2010
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 241 раз(а)



Does someone have - Composites for Construction: Structural Design with FRP Materials? The link has expired

Сообщение отредактировал en_boy - 24.01.2018 - 17:56
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 5.03.2018 - 21:19
Сообщение #154


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Paolo Rugarli - Steel Connection Analysis

Wiley-Blackwell, 2018
pdf, 537 pages, english
ISBN: 978-1-119-30346-6




Steel connection analysis and checking is one of the most complex problems in structural engineering, and even though we use very powerful computing tools, it is still generally done using very simplistic approaches. Fromthe point of view of a typical structural engineer, the problem to solve is to design and check nodes,1 not single connections, i.e. a number of connections between a number of different members – maybe tens or even hundreds of load combinations, inclined member axes, and generic stress states. In a typical 3D structure there may be several tens of such nodes, or maybe even hundreds, which may be similar, or may be different from one another; identifying nodes that are equal is one of the problems that the designer has to face in order to reduce the number of different possible solutions, and in order to get a rational design. However, this problem of detecting equal nodes has not been sufficiently researched, and there are currently no tools that are able to properly solve this issue. If posed with the due generality, the problem of checking 3D nodes of real structures has not been solved by automatic computing tools. Also, because a general method of tackling all these problems is apparently still lacking, usually a few ”cooking recipes” have been used to solve a limited number of typical, recurring (2D assimilated) nodes. Indeed, it often happens that true, real world nodes have to be analyzed by such recipes, despite the fact that the basic hypotheses needed to apply these recipes do not always hold true. This poses a serious problem because although these ”cooking recipes” have been widely used, in the past few years they have been applied to 3D structures designed using computer tools, in the non-linear range, perhaps in seismic areas, and with the aim of reducing the weight of steel. The effects of such oversimplification have already been seen in many structures where steel connections have failed, especially in seismic areas (e.g. Booth 2014), but even in non-seismic areas (e.g. White et al. 2013, Bruneau et al. 2011). Generally speaking, it is well known that connections are one of the most likely points of weakness of steel structures, one of the most cumbersome to design – indeed one of the least designed – and one of the least software-covered in structural engineering.

link.
25 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 10.03.2018 - 18:28
Сообщение #155


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Akbar R. Tamboli - Handbook of Structural Steel Connection Design and Details

McGraw-Hill Education, 2017
pdf, 652 pages, english
ISBN: ISBN-13: 978-1259585517




Fully updated with the latest AISC and ICC codes and specifications, Handbook of Structural Steel Connection Design and Details, Second Edition, is the most comprehensive resource on load and resistance factor design (LRFD) available. This authoritative volume surveys the leading methods for connecting structural steel components, covering state-of-the-art techniques and materials, and includes new information on welding and connections. Hundreds of detailed examples, photographs, and illustrations are found throughout this practical handbook.
Handbook of Structural Steel Connection Design and Details, Second Edition, covers:
- Fasteners and welds for structural connections.
- Connections for axial, moment, and shear forces.
- Welded joint design and production.
- Splices, columns, and truss chords.
- Partially restrained connections.
- Seismic design.
- Structural steel details.
- Connection design for special structures.
- Inspection and quality control.
- Steel deck connections.
- Connection to composite members.

link.
44 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 14.06.2019 - 07:15
Сообщение #156


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Мандриков А. П. - Примеры расчета металлических конструкций

Лань, 2012
pdf, 433 pages, russian
ISBN 9785811413157




В учебном пособии рассмотрено проектирование балочной клетки рабочей промплощадки, подкрановой балки, металлических конструкций, резервуаров. Изложены расчет и конструирование настила, прокатных и составных сварных балок, центрально и внецентрально сжатых колонн, стропильных ферм из уголковых профилей, тавров и двутавров, гнутосварных и бесшовных горячекатных труб. Даны примеры расчета и конструирования.

http://kitab.ttnda.az/upload-files/books/09/767/Primeri_rasceta_metalliceskix_konstr.pdf
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 26.06.2019 - 21:26
Сообщение #157


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Wasantha Mampearachchi - Handbook on Concrete Block Paving

Springer, 2019
pdf, 103 pages, english
ISBN-13: 978-9811384165
ISBN-10: 9811384169




This book provides a comprehensive overview of concrete block paving (CBP). Starting with the basics, such as the history, applications, advantages and limitations of CBP, it then discusses in detail the structural behavior, construction process, and design support conditions, covering topics like specifications for blocks and laying patterns, field performance and mix design for ICBP. Lastly, it examines good CBP practices and maintenance.

https://turbobit.net/6kfplr1vof2l.html
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 10.07.2019 - 08:31
Сообщение #158


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Sean Moran - Process Plant Layout, Second Edition

Elsevier, 2017
pdf, 758 pages, english
ISBN: 978-0-12-803355-5




Process Plant Layout, Second Edition, explains the methodologies used by professional designers to layout process equipment and pipework, plots, plants, sites, and their corresponding environmental features in a safe, economical way. It is supported with tables of separation distances, rules of thumb, and codes of practice and standards. The book includes more than seventy-five case studies on what can go wrong when layout is not properly considered. Sean Moran has thoroughly rewritten and re-illustrated this book to reflect advances in technology and best practices, for example, changes in how designers balance layout density with cost, operability, and safety considerations.

Key Features:
- Based on interviews with over 200 professional process plant designers
- Explains multiple plant layout methodologies used by professional process engineers, piping engineers, and process architects
- Includes advice on how to choose and use the latest CAD tools for plant layout
- Ensures that all methodologies integrate to comply with worldwide risk management legislation

link.
16 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 18.07.2019 - 12:32
Сообщение #159


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Franзois Levy, Jeffrey W. Ouellette - BIM for Design Firms: Data Rich Architecture at Small and Medium Scales

Wiley, 2019
pdf, 229 pages, english
ISBN: 978-1-119-25283-2




This book expands on BIM (Building Information Modeling), showing its applicability to a range of design-oriented projects. It emphasizes the full impact that a data modeling tool has on design processes, systems, and the high level of collaboration required across the design team. It also explains the quantitative analysis opportunities that BIM affords for sustainable design and for balancing competing design agendas, while highlighting the benefits BIM offers to designing in 3D for construction. The book concludes with a deep look at the possible future of BIM and digitally-enhanced design.

Through clear explanation of the processes involved and compelling case studies of design-oriented projects presented with full-color illustrations, BIM for Design Firms: Data Rich Architecture at Small and Medium Scales proves that the power of BIM is far more than an improved documentation and sharing environment. It offers chapters that discuss a broad range of digital design, including problems with BIM, how readers can leverage BIM workflows for complex projects, the way BIM is taught, and more.

link.
27 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение
Williams
сообщение 22.07.2019 - 18:16
Сообщение #160


Торговец чёрным деревом
Иконка группы

Группа: Админы
Пользователь №: 3953
Сообщений: 21778
Регистрация: 1.08.2003
Из: Москва
Загружено: байт
Скачано: байт
Коэффициент: ---
Спасибо сказали: 55385 раз(а)



Marc Borremans - Pumps & Compressors

Wiley - ASME Press Series, 2019
pdf, 498 pages, english
ISBN: 978-1-119-534204




A practical guide to the majority of pumps and compressors used in engineering applications. Pumps and compressors are ubiquitous in industry, used in manufacturing, processing and chemical plant, HVAC installations, aerospace propulsion systems, medical applications, and everywhere else where there is a need to pump liquids, or circulate or compress gasses. This well-illustrated handbook covers the basic function, performance, and applications for the most widely used pump and compressor types available on the market today. It explains how each device operates and includes the governing mathematics needed to calculate device performance such as flow rates and compression. Additionally, real-world issues such as cavitation, and priming are covered. Pumps & Compressors is divided into two sections, each of which offers a notation of variables and an introduction. The Pumps section covers piston pumps, radial turbopumps, axial turbopumps, rotating pumps, hydraulic pumps, and pumps with driving flow. The Compressors section covers piston compressors, rotating compressors, turbo compressors, ejectors, vacuum pumps, and compressors for cooling purposes. A virtual encyclopedia of all pumps and compressors that describes the mechanics of all devices and the theory, mathematics, and formulas governing their function. Allows the reader to develop the skills needed to confidently select the appropriate pump or compressor type and specification for their applications. Pumps & Compressors is an excellent text for courses on pumps and compressors, as well as a valuable reference for professional engineers and laymen seeking knowledge on the topic.

link.
29 Mb (RAR5, incl. 3% - info for restoration purpose)
Перейти в начало страницы
Вставить ник
+Цитировать сообщение

12 страниц V  « < 6 7 8 9 10 > » 
Ответить в данную темуНачать новую тему
2 чел. читают эту тему (гостей: 2, скрытых пользователей: 0)
Пользователей: 0

 



RSS Текстовая версия Сейчас: 28.03.2024 - 19:03
Ошибка работы драйвера БД

Ошибка при работе с базой данных

Возникла проблема при работе с базой данных.
Вы можете попробовать обновить эту страницу, нажав сюда